ENSTO SO274S Tension Clamp Instructions
- June 4, 2024
- ENSTO
Table of Contents
PEM1353
2022-02
Revision C
SO274S
SO275S
1.
CT164 d = 17 mm
| GTIN| ø mm| mm²
---|---|---|---
SO274S| 6418677446696| 7.0 –10.2| 4x(25-50)
SO275S| 6418677446719| 11.6-13.2| 4x(50-70)
2.
3.
SO274S: 4x(25-50) mm²
SO275S: 4x(50-70) mm²
4.
44 Nm
5.
LEGAL NOTICE
– The product must be installed only by a competent person with sufficient
training in installation practices and with sufficient knowledge of good
safety and installation practices in respect of electrical equipment. If local
legislation contains provisions in respect of such training or sufficient
knowledge in respect of installation of electrical equipment such provisions
shall be fulfilled by the said person.
– Ensto accepts no liability concerning claims resulting from misuse,
incorrect installation or ignored national safety regulations or other
national provisions.
– WARNING: Failure to follow the installation instructions may result in
damage to the product and serious or fatal injury.
ENSTO FINLAND OY ENSIO MIETTISEN KATU 2, P.O.BOX 77 06101 PORVOO, FINLAND TEL. +358 204 76 21 EMAIL: ENSTO@ENSTO.COM WWW.ENSTO.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>