rapoo MT760L Multi Mode Wireless Mouse User Guide
- June 14, 2024
- rapoo
Table of Contents
rapoo MT760L Multi Mode Wireless Mouse
Overview
- A: Left button
- B: Right button
- C: Middle button/scroll wheel
- D: DPI switching button
- E: Power, charging and low-power
- G: Device switching button
- H: USB port
- I: On/off switch
- J: Side scroll wheel
- K: Forward button
- L: Back button
Instruction
2.4G
- Plug in Rapoo receiver.
- Turn on the mouse.
- Done.
Bluetooth 3.0 and 5.0
- Turn on MT760L. Device light starts to blink rapidly.
- Press the device switch button to select the device channel.
- Keep pressing the device switch button at least 3 seconds to bluetooth pairing.
- Connect the mouse with your Bluetooth device. Blinking stops.
- Done.
- Bluetooth compatibility of the product is related to the host device and the installed software version. The product may be partially incompatible.
Package Contents
- Wireless mouse,
- Quick start guide,
- receiver*2,
- USB charging cable
System Requirements
- Windows® XP / Vista / 7 / 8 / 10 or later, USB port
Switch among devices
- Switch among five devices (two 2.4G devices + three Bluetooth devices) through the device toggle key.
Status LED
- DPI switching indicator
- Green LED blinks. It blinks once when you switch to the first DPI, blinks twice for the second DPI, blinks three times for the third DPI and blinks four times for the fourth DPI.
- Low power indicator
- Green LED blinks
- Charging indicator
- The green indicator turns on when being charged, and the green indicator turns off when fully charged.
Devices LED
- The three Bluetooth devices have corresponding indicators.
- Press and hold the Bluetooth key for 3 seconds to enter the code alignment state ( the blue indicator flashes slowly) or the reconnection state (flashing quickly),
- Short press the Bluetooth key to switch the device;
- The mouse can be found, and the blue device indicator flashes slowly and Bluetooth pairing can be made.
- The Bluetooth device is connected successfully: The corresponding blue device indicator is lit up for 5 seconds when the mouse is held.
- Toggle to 2.4G device connection without indicator prompt.
Side scroll wheel
- Scroll horizontally by default. Set up customize functions via driver.
Safety Instructions And Troubleshooting
Safety Instructions
- Do not open or repair this device. Do not use the device in a damp environment.
- Clean the device with a dry cloth.
Troubleshooting
- See www.rapoo.com for latest FAQs, drivers and quick start guide.
- For more services and help, please register on www.rapoo.com.
Agent Information
More Information
Scan
- www.rapoo.com
- TEL: 4008 887 778
Copyright
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Rapoo Technology Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>