BOSE 300 Black Adjustable Wall Mount Kit Instruction Manual
- June 14, 2024
- Bose
Table of Contents
BOSE 300 Black Adjustable Wall Mount Kit
Safety Precautions and Installation Guidelines
- Weight Limit : Ensure you do not exceed the maximum weight capacity of the mount. Overloading can result in speaker damage or injury. This mount is designed for the products listed on the packaging.
- Wall Type : Different wall materials (drywall, plaster, brick, concrete, etc.) may require specific mounting hardware. Ensure the mount is attached to wall studs or use appropriate wall anchors.
- Fixings : While the provided fixings are designed to accommodate a range of installations, they may not be suitable for all scenarios. If you are uncertain about the appropriateness of these fixings for your specific installation, we strongly recommend consulting a professional installer to ensure the safety and stability of your speakers.
- Electrical Safety : Avoid drilling into walls until you’re certain there are no electrical wires, pipes, or other utilities behind the drilling area. Use a stud finder with electrical detection capabilities.
- Periodic Checks : Periodically inspect the mount and hardware for any signs of wear, corrosion, or damage. Tighten any loose screws or fittings.
- Environment : Avoid installing the mount in places exposed to direct sunlight, high humidity, or extreme temperatures, which might affect the integrity of the mount or speaker performance.
- Tilting and Adjusting : If the mount has tilting or adjusting features, ensure they are securely tightened after setting the desired position to prevent unintentional movement.
- Cable Management : Ensure speaker cables are secured and do not pose a tripping hazard. Do not pinch or place heavy objects on the cables.
- Children and Pets : Keep small mounting parts out of reach of children and pets. Ensure the installation is secure to prevent them from accidentally knocking the speakers off the mount.
- Professional Installation : For optimal safety and performance, consider hiring a professional installer, especially for larger or more complex setups.
- Original Parts : Only use the hardware and parts supplied with the mount or recommended by the manufacturer. Substituting with non-original parts might compromise safety.
Soundbase (UK) Co., Limited and its affiliated corporations and subsidiaries
(collectively known as “Soundbass”), Intend to make this manual accurate and
complete. However, Soundbass makes no claim that the information contained
herein covers all details, conditions, or variations. Nor does it provide for
every possible contingency in connection with the installation or use of this
product. The information contained in this document is subject to change
without notice or obligation of any kind. Soundbars makes no representation or
warranty, expressed or implied, regarding the information contained herein.
Soundbars assume no responsibility for the accuracy, completeness or
sufficiency if the information contained in this document. SOUNDBASS is a
Soundbase (UK) Co., Limited brand and a registered trademark owned by
Soundbase (I-JK) Co., Limited. 02023 Soundbase (UK) Co., Limited. All Rights
Reserved.
Soundbase (UK) Co., Limited, RM 1104 Crawford House, 70 Queens Road, Central,
Hong Kong
SOUNDBASS (UK) CO., LIMITED RMI 104, CRAWFORD HOUSE 70 QUEENS ROAD CENTRAL
HONG KONG support@soundbass.co
www.soundbass.co/fb-support
Made In China