BOSE FS2C FreeSpace Retrofit Kit Instruction Manual

BOSE FS2C FreeSpace Retrofit Kit

Product Dimensions

(9.80 in)
FreeSpace FS4CE| 0.86 kg (1.90 lb)| 644 mm (25.35 in)| 265 mm (10.43 in)| 249 mm (9.80 in)

Usage Instructions

To use the FreeSpace FS2C & FS4CE Retrofit Kit, please follow the steps below:

Note: Choose a mounting position, method, and hardware consistent with local building codes and regulations. Bose recommends using a safety wire as a secondary securing mechanism if required by local building codes and regulations. See the diagram in the user manual for safety attachment points. Follow the manufacturer’s instructions for any secondary securing mechanism implemented.

Overview

Important Safety Instructions
Please read and keep all safety and use instructions.
This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product in typical fixed- installation systems. Please read this document and all safety warnings before attempting installation.

WARNINGS/CAUTIONS

• All Bose products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
• Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the installer’s responsibility to evaluate the reliability of any mounting method used for their application. Only professional installers with the
• knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.
• Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. Ensure the bracket is installed by a qualified professional installer and in accordance with local building codes.

Package Contents

FreeSpace FS2C Retrofit Kit

FreeSpace FS4CE Retrofit Kit

Product Dimensions

FreeSpace FS2C
0.72 kg (1.59 lb)

FreeSpace FS4CE
0.86 kg (1.90 lb)

Assembling the Tile Bridge

1. Align the rails and insert the tabs into the slots.

2. Pull the rails outward to secure them together.
   Note: If you are installing in a hard ceiling, assemble the tile bridge after inserting the assembled rails and ring through the hole cutout

3. Align the rails parallel to each other and press the tile bridge ring down to secure the ring to the rails.

Preparing Acoustic Ceiling Tile

1. Remove the existing loudspeaker from the ceiling. See the loudspeaker’s installation guide for more information.
2. Remove the ceiling tile.
3. Remove the existing tile bridge (if applicable).
4. Place the assembled tile bridge across the ceiling grid. If necessary, adjust the tile bridge so the rails rest on the ceiling grid.
5. Replace the tile in the ceiling.

Preparing Hard Ceiling (Existing Construction)

1. Remove the existing loudspeaker from the ceiling. See the loudspeaker’s installation guide for more information.
2. Remove the existing tile bridge (if applicable).
3. Insert the tile bridge rails and ring through the hole and place the rails parallel to each other across the ceiling grid or ceiling furring.
4. Assemble the tile bridge.

Using a Safety Cable

• Some regional construction codes require the use of a secondary method of securing loudspeakers to support structures to provide additional safety. Choose a mounting position, method, and hardware consistent with local building codes and regulations.
• Bose recommends using (1) a safety wire as a secondary securing mechanism. See the diagram for safety attachment points.
• Follow the manufacturer’s instructions for any secondary securing mechanism implemented.

Installation

WARNING: Tile bridge installation is required for FreeSpace retrofit kit installation. Failure to use a tile bridge could result in a falling hazard.

1. Place retrofit ring over the loudspeaker and flush against the loudspeaker baffle.
2. For instructions on loudspeaker installation, see the Mounting the Loudspeaker section in the appropriate loudspeaker installation guide.

For visual representations of the FreeSpace loudspeakers installed with retrofit kits (no wiring), see the following figures:

• A. FreeSpace FS2C with small ring. Intended for replacing and matching the diameter of FreeSpace DS 16F.
• B. FreeSpace FS2C with wide ring.
• C. FreeSpace FS4CE with wide ring.
• D. FreeSpace FS4CE with small ring.

Warranty Information

This product is covered by a limited warranty. For warranty details, visit PRO.BOSE.COM.

Regulatory Information

• Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “7” is 2007 or 2017.
• China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai)
• Pilot Free Trade Zone EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
• Mexico Importer : Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F.
• For importer & service information: +5255 (5202) 3545
• Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan.
• Phone Number: +886-2-2514 7676 Bose Corporation Headquarters: 1-877-230-5639

Bose and FreeSpace are trademarks of Bose Corporation.
©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.

©2020 Bose Corporation, All rights reserved. Framingham, MA 01701-9168 USA
PRO.BOSE.COM
AM850712 Rev. 01
February 2020

References

• Bose Professional

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>