Gritin G1326 LED Book Light User Guide

June 14, 2024
Gritin

Gritin G1326 LED Book Light

Gritin-G1326-LED-Book-Light-product-image

Welcome
Thank you for purchasing this Gritin product. To ensure optimum performance and safety, please read these instructions carefully before operating the product. It is strongly recommended you keep the manual for future reference. If you need any additional assistance, please contact our customer support team or send us an email to support@igritin.com .

Specification

Materials Al3S & Silicone
Light Source 19 LEDs
Single LED Power 0.2W
Input DC 5V/1A
Battery 1200mAh Rechargeable Battery

Structure Diagram

Gritin-G1326-LED-Book-Light-01

Instructions for Use

  1. Press the switch button to turn the light on or off
  2. Long press the brightness adjustment button to select the appropriate brightness: stepless dimming.
  3. Press the colour temperature adjustment button to select the appropriate colour temperature 3 colour temperatures to choose from, cool white & eye-protective warm light mode (19 LEDs), cool white mode (9 LEDs), eye-protective warm light mode (10 LEDs)
    • Note: Brightness and colour temperature can only be adjusted when the light is switched on.
    • Memory function: When the light is turned on, it will maintain the same brightness and colour temperature as before it was last turned off.

Indicator Light

  • Charging Indicator: On the side of the charging port, it is red when charging and green when fully charged.
  • Power Indicator : 4 power indicators, displaying the power during normal use, blue light flashes according to the power level when charging

Warnings

  1. Avoid drops, impacts and crushing.

  2. Keep away from water, fire, flammable gases and corrosive liquids.

  3. Do not use this product in extremely hot or cold environments.

  4. Please charge the product for at least 2 hours before first use. It is not recommended to leave the product in an uncharged state. If not used for a long time, charge the light at least once every 3 months.

  5. When charging the product, please use the supplied charging cable or a quality approved charging cable to charge the product, do not overload the circuit as this may cause electric shock or fire.

  6. To prolong the life of the battery, please do not overcharge and over discharge. When the light becomes noticeably dim, please charge the lamp in time and unplug the USB cable when fully charged.

  7. To avoid eye irritation, please do not look directly at the light source.

  8. This appliance is not suitable for use by persons (including children) who are physically, sensorial or mentally impaired, inexperienced or uneducated, unless supervised or instructed by a person responsible for their safety.

  9. The light source contained in this luminaire may only be replaced by the manufacturer
    or its service agent or similarly qualified person.

  10. Do not disassemble or replace the internal parts of the luminaire yourself as this may damage the product or even cause a safety hazard.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union, This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances, This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment

Gritin

© Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. All rights reserved.

Gritin LED Book Light

  • Model No. : G1 326
  • Manufacturer : Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
  • Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada Road, Bantian Street, Longgang District, Shenzhen, Guangdong, China

Made in China

Documents / Resources

| Gritin G1326 LED Book Light [pdf] User Guide
G1326 LED Book Light, G1326, LED Book Light, Book Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals