SmallRing CT200 Lateral Center Column Tripod User Manual

Lateral Center Column
Tripod CT200

**User Manual**

In order to ensure user’s safety and prevent the product damages caused by any improper use, please carefully read the “Warnings” below and properly keep this User Manual for future reference.
Foreword
Thank you for purchasing Small Rig’ s product.

Warnings

• Please read this User Manual carefully.
• Please keep the User Manual properly, and be sure to attach this User Manual when handing over the product (o theirs.
• Please heed all warnings and follow all instructions in the owner’s manual.

Intended Use

• Please read this User Manual carefully, especially the “Warnings”.
• Please use or store the product in the environment mentioned herein.
• It will be regarded as improper use when the users are not correctly following the User Manual or sing the product under the specific working condition

In the Box

Tripod kit x1
Allen Wrench x1
User Manual x1
Carrying Bag x1
Smartphone Holder x1
Weight Bag x1

Product Details

1. Quick-Release Plate
2. Bubble Level
3. Plate Clamp
4. Pan Locking Knob
5. Panoramic Base with 360″ Markings
6. Plate Locking Knob
7. Main Locking Knob

1. Column Angle Adjustment Locking Knob
2. Bubble Level
3. Female Screw for Accessories
4. Column Locking Knob
5. Horizontal Locking Knob
6. Leg Angle Adjustment Lock
7. Spiked Feet
8. Removable Rubber Feet
9. Flip Locking Lever

Adjusting the Ball Head

Turn the main locking knob counterclockwise to unlock the head and clockwise to lock it. Ensure that the main locking knob is firmly tightened before letting go of the camera.

Removing the Quick Release Plate

Turn the Plate Locking Knob counter-clockwise to remove the plate and clockwise to tighten it.

Attaching Accessories

The tripod is outfitted with a 1/4 female thread which can be used to attach accessories, such as articulating arms that can in turn support monitors, lights, microphones, etc.

Extending Tripod Legs

Lift up the leg tube flip locking lever to loosen the leg tube, adjust the height to the ideal working condition, and then press down the fiip locking lever to tighten the leg tube for use.
Adjusting Leg Angle

Each Leg can be adjusted by pulling the Leg Angle Adjustment Lock out and selecting one of the three positions. Please make sure that the Leg Angle Adjustment Lock is securely pushed back into the lock position after you have selected the desired leg angle.

Using the Short Center Column
Low-Angle Setup

• Loosen the Column Locking Knob and raise the center column until stops;
• While holding the center column with one hand, press the locking button at the bottom of the center column, then pull the center column out of the trpod,
• Insert the short column and tighten the Column Locking Knob until secure.

Converting to a Monopod

“The leg with foam grip can be unscrewed from the tripod and used as a monopod.

1. Unscrew the monopod leg from the tripod.
2. Screw the provided short column onto the top of the monopod leg

Adjusting the Center Column

1. Vertical Column Positioning
   o raise or lower the center column, loosen the Column Locking Knob and set the center column to the desired position. While holding the center column in position, tighten the Colum Locking Knab to lock the center column in position. Don’t over-tighten the Column Locking Knob, as this could damage the threads

2. Angular and Horizontal Column Positioning 1. Loosen the Column Locking Knob and raise the center column to its maximum height
   2. While holding the center column with one hand, press the locking button at the bottom of the center column, and raise the center column until clears the main casting
   3. Loosen the Column Angle Adjustment Locking Knob and position the center column at the desired angle. Tighten both the Column Locking Knob and Column Angle Adjustment Locking Knob,

3. Center Column Panning and Rotation
   Loosen the Horizontal Locking Knob, swivel center column around the tripod as desired. Tighten the Horizontal  locking Knob until secure.

4. Column Returning to the Upright Position
   1.  Extend the center column out unit it stops
   2. Tilt it up until s vertical, and with the proper alignment, side it down into the main casting.
   3. Tighten the Column Locking Knob unit secure

Service Warranty

Please keep your original receipt and guarantee card. Be sure the dealer has written on it the date of purchase and SN of the product. These are required for warranty service.

After-sale warranty terms:

1. 7 Days DOA Return Policy: Within 7 days from the date of the package receipt, return or replacement can be done if the item received is malfunctioning or physical damaged (not caused by human abused), return shipping cost will be on Small Rig’s charge.
2.  Small Rig products are entitled to warranty services as of the date of payment.

• Electronic products: 1-year warranty, 1-year free warranty service.
• Non-electronic products: 2-year warranty, 2-year free warranty service.

Note: In case of any conflict between our warranty period policy and applicable laws and regulations of the country/region where the products are sold, the latter shall prevail.

This warranty does not cover:

1. Defect caused by users’ violation of the warnings and “Intended Use”.
2. The product identification or SN label is removed or defaced in any way.
3. Product damage caused by problems not attributable to the quality of the products such as improper use of the products.
4. Product damage caused by unauthorized modification, disassembly, repair and other acts.
5. Product damage caused by fires, floods, lightning and other force majeure factors.

Warranty Mode:
For the products within the scope of warranty, Small Rig will repair or replace them on the basis of specific failures; the repaired/replaced products/parts are entitled to the remaining part of the original warranty period.

Contact Information:

• You’re advised to contact the online customer service personnel of corresponding shopping platform and submit a repair service application.
• You may also apply for repair service through Small Rig’s service email.
  Service Email: support@smallrig.com

For more support information: www.smallrig.com/support

Guarantee Card

ID No………………….
Item Name…………………….
Purchase Date …………………..
User Name…………………
Mobile……………..
Address ……………….
Receipt………………

**** Prolinx GmbH
Brehmstr.56,40239 Duesseldorf Germany
eu@eulinx.eu
Prolinx Global LTD
27 Old Gloucester Street London,WC1N3AX, UK
eu@eulinx.eu
Manufacturer: Shenzhen Leqi Network Technology Co., Ltd.
Add: Rooms 103, 501 and 601, Building 5, Fenghe Industrial Park, Nos. 1301-50
Guanguang Road, Longhua District, Shenzhen, Guangdong, China.
Consignor: Shenzhen LC Co., Ltd.
Add: Rooms 602, Building 5, Fenghe Industrial Park, No. 1301-50 Guanguang Road,
Xinlan Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.

Made in China
www.smallrig.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>