allegiant Smart Watch with Earbuds User Manual
- June 17, 2024
- allegiant
Table of Contents
- allegiant Smart Watch with Earbuds
- Appearance description and basic operation
- Charging the bracelet
- Earphone charging
- Basic screen operation
- Basic operation of Bluetooth earphones
- System setting
- Download and install the application
- Bind device and Bluetooth connection
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
allegiant Smart Watch with Earbuds
Please read this user manual carefully before using V1 .0
Appearance description and basic operation
- A short press on the screen to switch to the exercise status interface;
- Power button ( Short press to turn on/off the screen,Long press to turn on/off) ;
Charging the bracelet
Charging the bracelet: dedicated magnetic wire, close to the automatic
adsorption charging.
Note : Please charge for about 2 hours to fully charge for the first use;
please charge the device every three months if it is not used for a long time.
Earphone charging
Earphone charging: Put the earphone (figure 1) into the bracelet (figure 2), the bracelet will automatically charge the earphone, and it will automatically disconnect when it is full.
Basic screen operation
Basic operation of Bluetooth earphones
- Indicator light: always on when charging, turn off when fully charged.
- Answer/hang up a call: click.
- Power on/off: long press the earphone (about 3S).
- Play/pause/reject call: long press the earphone.
- Music control previous song/next song: control on the. watch interface
System setting
You can use all the functions when your watch is connected APP, please confirm
your phone system version satisfies the following conditions.
Download and install the application
- Scan the QR code of the icon.
- you can also search for “Brand Fit” in the app store to download)
Bind device and Bluetooth connection
Connect your watch to your phone
Open the APP, search for “My Device”, select the device mode 1 “JM03” and
click to connect and pair (the firmware version and device power will be
displayed if the connection is successful, and the time and exercise data will
be automatically synchronized)
- When connecting, please make sure that the Bluetooth of the mobile phone is turned on, the watch is fully charged, the distance between the watch and the mobile phone is less than 10 meters, and it is not paired with other devices.
- After the first connection is successful, the device will automatically connect after it is turned off and turned on, or when it leaves the signal range and disconnects and then returns to the vicinity of the phone.
- When the APP connects to other devices, please unbind on the APP first, and then connect the device. Unbind: Tap “Connected” on Android to disconnect the device. After completing this step, the 1OS device needs to be set in the mobile phone-Bluetooth connection device connection)
Connect the headset to the phone
- CDTake the headset out of the device compartment, there will be a power-on prompt sound, and the indicator light will flash, turn on the Bluetooth in the phone settings, click the corresponding Bluetooth name “JM03tws” to pair and connect, after the connection is successful, you will see “Connected” in the settings, which means The product is successfully connected.
- After the first connection is successful, take out the headset from the charging compartment again, and it will automatically connect in about 5 seconds. If the phone is manually disconnected, you need to reconnect in the phone’s Bluetooth settings.
- Reminder: Since the watch and the earphone belong to different Bluetooth signals, please bind and use them twice separately. The wristband will not be connected to the APP for a long time or the time may be inaccurate after the power is off, and the APP needs to be synchronized.
Notice
- It is forbidden to use adapters with charging voltage>Sv and charging current>2A, and the charging time is 60 minutes;
- It is forbidden to charge in the presence of water stains; the built-in battery is forbidden to disassemble by yourself to avoid damage to the equipment;
- Soaking, swimming, diving, diving, hot showers are prohibited;
- This product is not waterproof, please remove it when washing hands, raining, during strenuous exercise and during other activities that may cause water to enter the equipment;
- The health signs data of this product such as heart rate, blood oxygen, and blood pressure are for reference only, not as a basis for medical diagnosis;
- During the blood pressure test: please keep your body relaxed and still, the bracelet is at the same height as your heart, and please do not talk during the test;
- Wearing headphones during strenuous exercise may fall off and cause damage or loss of the product.
Attention! After using the earphone, please clean it and then put it in the charging case. Please make sure that the charging position on the earphone is clean and free of water, sweat and dirt. To prevent abnormal charging or oxidation, causing damage to the pro duct and affecting use!