Enerlites ENLC001 PVC Round Floor Box Installation Guide
- June 14, 2024
- ENERLITES
Table of Contents
INSTALLATION INSTRUCTIONS
ENLC001
6″ Round Floor Box
SPECIFICATIONS
Material……………………………………………………………………………………………………Nonmetallic PVC
No. of Knockouts…………………………………………………………………………………………………………….4
Conduit, tubing or raceway……………………………………………………………………………………………..1″
Box depth……………………………………………………………………………………………………………………..6″
Box diameter…………………………………………………………………………………………………………………5″
Minimum concrete depth…………………………………………………………………………………………………3″
DESCRIPTION/ FEATURES
Enerlites Floor box base provides a durable solution for in-floor distribution
of power and communications services. It has round base and is designed to be
embedded in a concrete floor with some excess length remaining above the plane
of the floor. Trim out is easy – just use a handsaw to cut off box at desired
height to accommodate carpet, tile, or other flooring. It measures 6.437 Inch
x 6 Inch. Box comes with four 1″ Inch hubs for conduit hubs termination.
Floor box has sturdy PVC construction for added durability and maximum
corrosion resistance. It features four reducing bushings, one polyethylene
temporary pour lid and provides quick, easy, secure installations.
- Concrete tight and suitable for any on grade/below grade application
- PVC molded ports and reducer plugs included
- A wide choice of cover materials and finishes are available
WARNING
Turn the POWER OFF at the circuit breaker before installing the Floor Box
Read and understand these instructions before installing. This device is
intended for installation in accordance with the National Electric Code and
local regulations. It is recommended that a qualified electrician performs
this installation. Make sure to turn off the circuit breaker or fuse(s) and
make sure power is off before wiring the device. Use copper wire only, or
equivalent.
NOTES : 10-12 AWG Stranded or Solid Copper wire is recommended.
Leveling ring compatible with Enerlites part number:
- 975516-SS, 975517-C, 975517-S, 975519-C, 975519-S
Adapter ring compatible with Enerlites part number:
- 961501-C, 961501-C-USB, 961501-C-GFCI
- 961501-S, 961501-S-USB, 961501-S-GFCI
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 2
years from the date of purchase.
Original receipt or proof of purchase from an authorized retailer must be
presented upon warranty claim. ALL claims must be verified and approved by
Enerlites, Inc. Warranties from other Enerlites products may vary. This
warranty is nontransferable and does not cover normal wear and tear or any
malfunction, failure, or defect resulting from misuse, abuse, neglect,
alteration, modification, or improper installation. To the fullest extent
permitted by the applicable state law, Enerlites shall not be liable to the
purchaser or end user customer of Enerlites products for direct, indirect,
incidental, or consequential damages even if Enerlites has been advised of the
possibility of such damages. Enerlites’ total liability under this or any
other warranty, express or implied, is limited to repair, replacement or
refund. Repair, replacement or refund are the sole and exclusive remedies for
breach of warranty or any other legal theory.
© 2021 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM
0204170087-01
REV 20230802
Documents / Resources
|
Enerlites ENLC001 PVC Round Floor
Box
[pdf] Installation Guide
ENLC001, ENLC001 PVC Round Floor Box, PVC Round Floor Box, Round Floor Box,
Floor Box, Box
---|---