Kraus KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet Instruction Manual

June 14, 2024
Kraus

Artec Pro™ 2 Function
Commercial Style
Kitchen Faucet
KPF-1603

KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet

Congratulations on the purchase of your new  KrausR plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

DO NOT RETURN TO STORE

Please contact our Customer Service Team 1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.


Prior to Installation:

  • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact KrausR Customer Service at 800-775-0703 for a replacement.
  • Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
  • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
  • Pre-drilled hole size requirement: 1 3/8″ (min)
  • Max countertop thickness: 2 3/8”

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]

Tools Required

Kraus KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet - Tools
Required

Care & Maintenance

*To keep the product clean & shining, follow the steps below:

  1. Rinse with clean water & dry with a soft cloth
  2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
  3. Do not use cloth with a coarse surface
  4. Unscrew the aerator and clean when necessary
  • This installation manual is subject to change without further notice.

Diagram and Parts List

Kraus KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet - Parts
List

A. Faucet Body
B1. Seat
B2. Rubber Washer
B3. Metal Washer
B4. Mounting Nut
B5. Screw
C. Hex Wrench

Faucet Dimensions

Kraus KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet - Faucet
Dimensions Installer Tip:
Shut off main water supply before installing new faucet.

Step 1. Remove washer and lock nutKraus KPF-1603 Artec Pro Function
Commercial Style Kitchen Faucet - lock nutShut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting hardware (B) from the faucet body (A).
Step 2. Installing the faucetKraus KPF-1603 Artec Pro Function
Commercial Style Kitchen Faucet - lock nut 1Insert the faucet through the hole in the sink or countertop. From underneath the sink, attach the seat (B1), rubber washer (B2), metal washer (B3), and nut (B4). Lock nut (B4) into position by tightening screws (B5).
Step 3. Making the water supply connectionsKraus KPF-1603 Artec Pro
Function Commercial Style Kitchen Faucet - lock nut 2Push the quick connector (2) firmly upward and attach it to the receiving block (1). Pull down moderately to ensure the connection has been made.
If it is necessary to remove the quick connector (2), squeeze the tabs on the hose and then pull down to disconnect.
Step 4. Making the water supply connectionsKraus KPF-1603 Artec Pro
Function Commercial Style Kitchen Faucet - lock nut 3Thread the nut (1) on the supply line onto the outlet of the water supply valve and tighten with a wrench. Do not overtighten.
NOTE: Please make sure filter washers are installed beforeconnecting to the main valve.
Step 5. Flushing and checking for leaksKraus KPF-1603 Artec Pro
Function Commercial Style Kitchen Faucet - lock nut 4Kraus KPF-1603 Artec Pro Function
Commercial Style Kitchen Faucet - lock nut 5Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction. Be sure to hold the end of the hose down into the sink and turn the faucet on to the warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes away any debris that could cause damage to internal parts. Check for leaks.
Reinstall the spray head by hand tightening it back onto the spray hose.
NOTES:

  1. Do not lose the rubber washer (1) when installing the sprayer back on.
  2. The magnet end marking with a black dot should be toward the hose for correct magnet installation.

Step 6. Flush faucetKraus KPF-1603 Artec Pro Function Commercial Style
Kitchen Faucet - lock nut 6To activate the spray mode, simply press the handle (1) located under the spray head.

Replacement Parts

Kraus KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet -
Replacement Parts**Denotes faucet component color options: CH – Chrome

SFS – Spot Free Stainless Steel
MB – Matte Black
BG – Brushed Gold
SB –  Black Stainless
SBBG – Black Stainless/Brushed Gdol
MBSB –  Matte Black/Black Stainless
SFSB –  Spot Free Black Stainless
BGMB – Brushed Gold/Matte Black
SFSMB – Spot Free Stainless Steel/Matte Black
SFACB – Spot Free Antique Champagne Bronze
BL – Black
WH – White
Replacement Parts List Finish / Color
--- ---
1.Spray Head CH,SFS,SBBG,SFSB,SFACB, MBSB,BG,SFSMB,BGMB,MB**
2.Magnet
3.Spray Hose Assembly BLBG,BLSFS,BLSB,BLSFACB
GRCH,GRSFS,BLSFSB,BLMB* KP27062*
4.Spring CH,SFS,BG,513,SFACB,SFSB,MB**
5.Inverter
6.Spray Support Assembly CH,SFS,SBBG,SB,BG,MB
SFSMB,BGMB,SFACB,SFSB** KP27064
7.Spout Nut CH,SFS,BG
MB,SB,SFACB,SFSB** KP27065
8.Spout CH,SFS,SB,BG,MB, SFACB,SFSB**
9.Diverter
10.Aerator Assembly CH,SFS,BG,MB,SB, SFACB,SFSB**
11.Cartridge
12.Bonnet Nut
13.Cap CH,SFS,BG,MB,SFACB**
14.Handle Assembly CH,SFS,BG,MB,SFACB**
15.Rubber & Metal Washer
16.Mounting Nut & Nut
17.Block
18.Flange CH,SFS,BG,SB,SFACB,SFSB,MB**
19.Seat
20.1.8GPM Flow Restrictor WH**
21.Quick Connect
22.Hex Wrench
23.Filter Washers

*Denotes spray hose assembly color options: Spray hose assembly color options: Black hose w/ Brushed Gold connector (BLBG), Black hose with Spot-Free Stainless connector (BLSFS), Black hose with Black Stainless connector (BLSB), Black hose with Matte Black connector (BLMB), Gray hose with Chrome connector (GRCH), Gray hose with Spot-Free Stainless connector (GRSFS); Black hose with Spot-Free Antique Champagne Bronze connector (BLSFACB); Black hose with Spot-Free Black Stainless connector (BLSFSB)

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM CAUSE ACTION
Leakage under the handle. Bonnet nut (12) has come loose. Remove the index

(14.3). Loosen set screw (14.2) with hex wrench (14). Remove the handle (14.1). Unscrew cap (13) (by hand only). Tighten bonnet nut (12) with an adjustable wrench
The aerator has an irregular or reduced water flow.| The aerator is dirty or misfitted.| Remove the aerator and check for debris. Ensure that the rubber washer is properly installed.
The water pressure is low.| The connector underneath the deck is clogged with debris.
The aerator is clogged.| Turn off the water supply and disconnect the connector / aerator. Unscrew the connector / aerator and clean under running water. Screw the connector / aerator back. Test water flow. If water pressure is still low then replace the connector / aerator.
The screen filters in the hose connectors are dirty.| Turn off the water supply at the water valves and unscrew the hose connectors from water supply lines. Clean the screens in the water lines with hot water, removing any debris or calcium build up.

Codes/Standards Applicable:

Kraus KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet -
Applicable

Faucet – Lifetime Limited Warranty
KrausR USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
Kraus warrants the Faucet’s sprayhead assembly (including the engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of purchase.
Kraus warrants the Faucet’s cartridge to be free from defects in material and workmanship under normal usage for a period of five (5) years from the date of purchase.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.
Commercial Warranty
Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of Products used in industrial, commercial and business applications.
Care and Cleaning Instructions
Certain cleaning products may cause damage to a Product’s finish and use of the following on the Product will void this warranty:

  • Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
  • Abrasive pads, steel wool or wire brushes

What is Not Covered
This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover any free gifts included with purchase.
This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance,alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

How to Make a Warranty Claim
If you are a consumer purchaser, please contact a Kraus Customer Service Representative at:
Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 Toll- free 800-775-0703 [email protected]
If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at:
Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 [email protected]
If you are an authorized partner, please contact a Partner Support Representative at:
Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 [email protected]

In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Limitation on Duration of Implied Warranties
Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.
Limitation of Special, Incidental or Consequential Damages
Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, NSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.

Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance

IMPORTANT

Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY http://www.kraususa.com/registration

www.kraususa.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Kraus User Manuals

Related Manuals