Classic Phono TT-33 Retro Suit Case Turntable User Manual

Model TT-33

User manual Retro Suit Case Turntable

Safety instructions

• When using electrical equipment basic safety precautions should always be followed.
• This equipment is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience or knowledge. They should be given appropriate supervision and instructions to use the equipment by a person responsible for their safety.
• Ensure the equipment is not too close to heat emitting appliances or placed in direct sunlight.
• Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the equipment to the mains power supply.
• Do not leave the equipment unattended while connected to the power supply.
• Do not immerse the equipment in water or any other liquids. It is imperative to unplug the power cord after the equipment has been used, before it is cleaned and while being repaired.
• Close supervision is required when using this equipment near children.
• Never leave the equipment within the reach of children.
• Repairs to electrical appliances should only be performed by qualified personnel. Improper repairs may place the user and/or equipment at serious risk.
• This equipment’s intended for household use only and should not be used for industrial or commercial purposes.
• Do not operate this appliance with a damaged plug or cord, after a mal- function or after being dropped or damaged in any way.
• Do not use this equipment for anything other than its intended use. This equipment must be placed on a stable, heat resistant surface.
• Do not push objects into any openings as damage to the equipment and/or electric shock may occur.
• Do not use this product in wet or bad weather conditions. This product is not a toy.
• Do not play music at excessive levels especially near children.
• The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual.
• Refer all service to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or when the apparatus has been exposed to rain or moisture.
• Please keep the unit in a well-ventilated environment.
• These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
• The main plug is used as disconnect device, the disconnect device shall remain readily operable.
• This equipment is a class II or double insulated electrical appliance. It is designed in such a way that it does not require a safety connection to electrical earth.
• The lighting with the triangle symbols shows that the unit contains non- insulated dangerous voltage.
• The batteries in remote shall not be exposed to excessive heat such as sunshine and fire.
• The apparatus shall not be exposed to liquid, and objects filled with liquids, such as vases, shall not be placed on the apparatus.

We strongly recommend retaining the packaging for future transport of the product.

WARNING:

• Never remove the casing of this apparatus.
• Never place this apparatus on other electrical equipment.

Outlook and controls

1. SPEAKER
2. LOCK
3. AUX INPUT 3.5MM JACK| 4. LEFT/RIGHT LINE OUT JACK
5. SUBWOOFER LINE OUTPUT JACK
6. POWER SUPPLY
---|---

Inside

7. ADAPTOR FOR 45 RPM RECORDS
8. TONEARM, ARM LIFT
9. AUTO STOP ON/OFF SWITCH
10. R.P.M 33⅓, 45, 78 SELECTION
11. ARM LOCK/REST| 12. SPINDLE
13. TURNTABLE
14. CARTRIDGE
15. POWER INDICATOR
16. POWER/VOLUME
---|---

Metal support

1. Tap up the cover until the Metal spike touches the end of the metal arm.
2. Move the metal spike to the gap of the other metal arm.

ACCESSORY
Adaptor for 45 rpm record
To play the 45 rpm record, place the ADAPTOR on the SPINDLE.

1. Place the 45 rpm adaptor over the spindle.
2. Gently place your 45 rpm record onto the turntable.
3. Follow the step of OPERATION to play your record.

Cartridge installation

UNPACKING

1. Remove all packing materials from the unit. (Save all packing materials.)
2. Carefully remove the unit from its Styrofoam and take it out of the plastic bag.
3. Although records can be played with the lid closed as well as opened, it is recommended that the lid is opened.
4. Remove the white protective needle cover by gently pulling towards the front of the unit.

REMOVING THE NEEDLE

1. Gently pull down the tip of the cartridge.
2. Pull the cartridge forward.
3. Pull out and remove.

INSTALLING THE CARTRIDGE
Position the red cartridge with the sapphire stylus facing down.

1. Line up the tab on the back of the needle with the tone arm.
2. Insert the cartridge with its front end at a downward angle.
3. Lift the front end of the needle upward until it snaps into place.

ADDITIONAL INFORMATION

1. The red cartridge has a very small sapphire stylus that is barely visible.
   Notice that the replacement needle you are receiving should be the same as the one already on the tone arm.

2. This Needle is safe for 33 ⅓, 45 & 78-speed records.

3. Replacing the needle depends on how often you use the turntable.

System connection
Follow the operation steps on the next page to start using the unit.

Operation

Use the POWER CABLE to connect the unit with the power outlet.
POWER ON
Turn the unit on by rotating the POWER/VOL located on the front panel to power on the unit.

VOLUME CONTROL
Rotate the POWER/VOL on the front panel of the unit to adjust the volume to a comfortable level.

STEPS   OF PLAYING RECORDS
Release the TONE ARM from the ARM LOCK/REST.
SELECT SPEED: Set the R.P.M 33⅓, 45, 78 SELECTION to the desired speed of the records.

AUTO STOP
Choose whether the records stop automatically when finished playing by the AUTO STOP ON/OFF SWITCH. If the AUTO STOP ON/OFF SWITCH turns on, the record will stop turning when it comes to its end.

Gently place the record on the TURNTABLE.
Gently lift the TONE ARM and move it to the desired starting point on the records.

LINE OUT CONNECTION

• Connect the Auxiliary cable ( not supplied ) to the LINE OUT JACK on the rear of the record player and the other end of the cable to the auxiliary inputs of the external component, e.g. another Hi-Fi unit, Amplifier, etc.
• Check the volume level of your external component and adjust it if necessary.
• Refer to the instruction manual of the external component for its correct operation.

SUBWOOFER OUTPUT JACK
The subwoofer output jack enables you to attach an active subwoofer (not supplied) which will enhance bass response. Please contact your retailer for suitable subwoofer models.

AUX IN CONNECTION & OPERATION
Any component with an Audio Output, such as for instance a DAB Radio module, CD/Cassette Player, MP3 Player can be connected by using a cable with a 3.5mm dia. jack plug (a 3.5mm AUX IN cord is supplied).

• Turn the unit on and adjust the volume.
• Plug the supplied AUX IN cord into the AUX IN JACK on the rear of the unit.
• Insert the plug at the other end of the Auxiliary cable into the output jack or 3.5mm dia. headphone jack of the external audio player.
• Switch the other Audio Player on, play the music and adjust its volume if required.

Note: Inserting the Aux plug will disable the record play function.

Trouble shooting

THERE IS NO POWER

• The POWER CORD is not connected to either a power outlet or the unit.
  • Check the plugs and whether they are not damaged.
• The unit is not turned on.
  • Rotate the POWER/VOL switch from the OFF position.

THE UNIT KEEPS SHUTTING ITSELF DOWN

• This unit has a POWER SAVING FUNCTION, to comply with ERP Stage II regulations. If the unit is not operated or there is no signal output for 15 minutes, it will automatically turn itself off.
• Turn the POWER/VOL switch off for approximately 5 seconds and then switch it ON again to reactivate the unit.

THE TURNTABLE IS NOT ROTATING

• The turn table drive belt may have come off the turn table mechanism and needs to be refitted. Please contact professionals for advice on how to re-fit it.
• The AUX IN cable is plugged in. Disconnect it.

MY 45RPM RECORDS DO NOT FIT ON THE TURNTABLE SPINDLE

• Ensure you have placed the 45rpm spindle adaptor on the turn table before installing the record.

MY RECORD DOES NOT PLAY AT THE CORRECT SPEED

• Switch the speed control switch to the correct one for 33⅓, 45 or 78 rpm records.

MY 33⅓ RECORD WOBBLES WHEN PLACED ON THE TURN TABLE PLATTER

• Make sure you have folded down the ARM LOCK before placing the record on it, or that the 45rpm SPINDLE ADAPTOR has not been left on the turntable platter.

THE TONE ARM SLIDES ACROSS THE RECORD AND DOES NOT PLAY IT

• The white protective cover is still covering the needle cartridge. Remove it.
• The stylus tip may be damaged. Replace the stylus. (See specifications for details)

NO SOUND IS HEARD WHEN THE RECORD IS PLAYING

• Adjust the VOLUME CONTROL knob to turn the sound up.
• Check if the Aux connection is removed.

Specifications

• DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Guarantee

Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community.
Hereby, Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at techdoc@lenco.com

Service

For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>