New Classic Furniture B561-300 Aries Queen Platform Bed Instruction Manual
- October 30, 2023
- New Classic FURNITURE
Table of Contents
New Classic Furniture B561-300 Aries Queen Platform Bed
Product Information
The B561-300 ARIES 5/0 Q PANEL BED-HB/FB/RAILS is a high-quality bed frame that provides stability and durability. The bed frame comes with a headboard, footboard, bed roll-out slats, bed slats support, side rails, and center slats. The bed frame is easy to assemble and comes with all the necessary hardware for assembly.
Product Parts List
- A – Headboard
- B – Footboard
- C – Headboard Leg LSF
- D – Headboard Leg RSF
- E – Bed Roll-Out Slats
- F – Bed Slats Support
- G – Side Rail Left
- H – Side Rail Right
- I – Center Slat
Product Hardware List
- JCBC Bolt (1) – M6 x 30mm (12 pcs)
- JCBC Bolt (1) – M6 x 50mm (4 pcs)
- Flat Washer 1/4ID x 19mmOD Blk (12 pcs)
- ALLEN KEY m4x65mm Blk (1 pc)
- ALLEN KEY m5x65mm Blk (5 pcs)
- Flat Head Chipboard Screw m4x32mm Rbw (32 pcs)
Product Usage Instructions
Step 1: Assemble the Headboard (A) and Headboard Legs (C, D)
Attach the Headboard Leg (C, D) to the Headboard (A) using Flat Washer (3) and securing with ALLEN KEY (4). Fix the other holes with Csk Screw (6) as shown in the diagram. Tighten all screws periodically with use as screws will become loose. Check the tightness of all screws every 6-8 weeks.
Step 2: Attach Side Rails (G, H) and Side Rail Leg (J) to the Headboard and Footboard
Attach Side Rail (G) and (H) to the Side Rail Leg (J) using JCBC Bolt (1) with Flat Washer (3) and securing with ALLEN KEY (4) by outside side rail (G) and (H). Loosen JCBB Bolt at Headboard and Footboard Leg using Allen Key (5). Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten them accordingly. Repeat step 2.2 with the other end of the rail to hook onto FOOTBOARD (B).
Step 3: Install Bed Slat Support (F), Bed Roll-Out Slats (E), and Center Slats (I)
Fix the Bed Slat Support (F), to Bed Slat (E), and Center slats (I) tighten with JCBC Bolt (2) as shown. Install the bed slat (E) to side rail (G) and (H) and tighten with Csk Screw (6) as per diagram shown. Push the side rail (G) and (H) meet with wooden slat (E) and fix the CSK Screw (6) by using the Screw Driver. Level the bed frame as required. The setup must be done at the decided location for the bed to obtain perfect stability. Repeat step 3 for the other set of slats assembly. Tighten all screws periodically with use as screws will become loose. Check the tightness of all screws every 6-8 weeks.
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items and compare with the parts list and/or hardware list shown.
PARTS LIST
HARDWARE LIST
ASSEMBLY INSTRUCTIONS
-
Attach Head Board Leg ( C,D ) to Head Board ( A ) as shown using JCBC BOLT( 1 ) with Flat washer (3)and securing with ALLEN KEY ( 4 ) .
-
Fix the other holes with Csk Screw (6) as shown.
-
Attach Side Rail ( G ) & ( H ) to the Side Rail Leg ( J ) as shown using JCBC BOLT( 1 )with
-
Flat washer (3)and securing with ALLEN KEY ( 4 ) by outside side rail (G) & (H) .
Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5) (Do not tighten them before Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten them accordingly.
Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B).
-
Fix the Bed Slat Support (F ), to Bed Slat (E) and Center slats (I) tighten with JCBC Bolt (2) as shown . Install the bed slat ( E ) to side rail ( G ) & ( H ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY)
Repeat step 3 for other set of slats assembly.
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>