Classic COATINGS SYSTEMS CW300 Organic Concrete Cleaner Concentrate User Manual

Classic COATINGS SYSTEMS CW300 Organic Concrete Cleaner Concentrate

DESCRIPTION

Classic Organic Concrete Cleaner Concentrate is an organic acid replacement technology that has zero voc and a low ph salt that is used to replace traditional acid, which means there’s no need to neutralize. It is 4 to 10 times more effective than citric and glycolic acid and is 4 to 5 times more effective than phosphoric acid when dissolving calcium carbonate. Organic Concrete Cleaner is classified as a mild skin irritant but is non-corrosive to skin, mild steel and has no fumes. It is approved by the US EPA as a non-food inert ingredient in biocide applications. Non-Hazardous and Bio-Degradable. We highly recommended doing a sample first before applying. It can be used on pool decks, concrete slabs, stone, bricks, and grout. It may be used for both interior and exterior applications in low and high traffic areas within a wide range of climates. It is an excellent cleaner and etcher. It is environmentally safe and cleans up easily with water. Recommended mixing ratio: 1 quart cleaner to 1 gallon distilled or ionized water. New concrete must cure for 28 days before use.

COVERAGE:

1 quart (.946 Liters) mixed with 1 gallon of distilled water covers approximately 300-350 sq. ft. with one coat depending on the surface and application method.

PACKAGING:

• 1 quart bottle

STORAGE:

1. Store in a cool, dry location.
2. Store out of direct sunlight
3. Protect from freezing weather and other damage.
4. Store at a temperature between 40ºF (4ºC) and 90ºF (32ºC).

SHELF LIFE:

• 3 years – Unopened

COLOR:

Blue in bottle but clear when applied

Visit our Website:
www.ClassicCoatingsSystems.com
See our Youtube channel for How-to Videos and our Instagram for inspiration!

ADVANTAGES

• Non-Hazardous and Non-corrosive to skin and mild steel
• Can dilute 1 quart cleaner to 3 parts distilled or ionized water for stronger and faster results
• Bio-degradable and environmentally safe
• Safe for use around lawn and plants
• No Fumes and non-flammable
• Waterborne and zero voc
• Removes grout haze cement residue, grease, oil, and efflorescence

LIMITATIONS

• Application temperature should be between 45° F and 100° F
• For best results, standard application is two coats
• We highly recommend testing a small area before use

TYPICAL USAGE

• Pool Decks
• Driveways
• Garage Floors
• Work Shops
• Concrete Restoration projects
• Concrete floors
• Bricks
• Natural Stone
• New and old concrete side walks
• Grout

PREPARATION

1. READ SDS BEFORE HANDLING & APPLICATION
2. Highly recommended to test a small inconspicuous area first.
3. TURN OFF SPRINKLERS FOR TWO DAYS PRIOR TO AND AFTER.
4. Always protect neighboring surfaces including wood, carpet, metal, landscaping and other non-masonry surfaces.
5. Caution: Surface is slippery when wet.
6. Wear rubber gloves & safety glasses
7. New concrete must cure for 28 days before stain applying.

APPLICATION

Attention: Read SDS before handling and applying.

1. Always wear eye and hand protection when using this product. Pour Organic Concrete Cleaner Concentrate into a larger pail. Mixing ratio is 1 quart cleaner to 1 gallon of distilled water. You can mix it with a drill that has a paddle attachment at low speed for 3 to 4 minutes.
2. Pour diluted cleaner into a hand pump sprayer with a cone tip. We recommend working in sections to avoid letting the product dry. Apply first layer going in counterclockwise circular motions making sure to cover sides and expansion joints if applicable.
3. Apply the second coat in a circular motion going clockwise, making sure to cover any missed areas.
4. After 30 to 60 seconds, pressure wash with 2700psi. Do not let cleaner dry before pressure washing. After the cleaning process is complete, rinse the whole area well.

NOTE: It is HIGHLY recommended that on-site samples and mock-ups be made by the applicator. Representative test sections must be produced for the owner’s approval in writing and to ensure applicators are familiar with the product and installation procedures

MIXING RATIO

Add 1 quart of Organic Concrete Cleaner Concentrate to 1 gallon of distilled or ionized water. Thoroughly mix anywhere between 2 and 4 minutes with a drill that has a paddle attachment at a low speed. Always wear protective equipment when handling.
Note: You can dilute 1 quart cleaner to 3 parts distilled or ionized water for stronger and faster results. Be aware that this method will limit the square footage covered.
For step-by-step guides on how to apply our cleaners, stains, and sealers, please visit: youtube.com/classiccoatingssystems
Or contact technical support at: 951-279-2600

HANDLING PRECAUTIONS:

Use only with adequate ventilation. An appropriate cartridge type respirator must be used during application in confined areas. Avoid contact with skin. Protective gloves, eyewear and clothing are recommended.

PROP 65 WARNING:

Classic Coatings Systems, as a blender of processed material in the State of Cal-ifornia, is required by Proposition 65 to warn that one or more of the components contained in the product contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. The State of California (Proposition 65) requires this warning in the absence of definitive testing to prove that the defined risks do not exist. We believe this product complies with all other applicable state and federal laws and regulations governing manufacturing, distribu-tion and intended use. User is solely responsible for the legal disposal of this container and/or its contents

WARRANTY

Classic Coatings Systems products are warranted for one year after date of purchase. Please refer to the Limited Material warranty for addition-al clarification. NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY. We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option.
Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase or-ders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY.
BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET & FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.
Technical assistance and info. is available by calling: 951-279-2600 www.ClassicCoatingsSystems.com

Classic Coatings Systems • 255 Citation Circle, Corona, CA 92878 © 2015 Classic Coatings Systems Inc. All rights reserved
@classiccoatingsystems /classiccoatingssystems

References

• Classic Coatings Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>