New Classic Y0000372 Box Fan User Manual
- June 3, 2024
- New Classic
Table of Contents
Box Fan Y0000372
USER’S MANUAL
Y0000372 Box Fan
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ
AND KEEP FOR FUTURE REFERENCE.
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THIS APPLIANCE AND RETAIN
IT FOR FUTURE REFERENCE.
IMPORTANT SAFEGUARD
When using an electrical appliance, basic safety precautions should always be
observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
- Use fan only as described in the manual. Other use not recommended may cause fire, electric shock or injury.
- This product is intended for household use only, not for commercial use.
- To protect against electrical shock, do not place the fan in window, and do not immerse the unit, plug or cord in water or spray with liquids.
- Close supervision is necessary when any appliance used by or near children.
- Unplug the fan from outlet when not in use, when moving it from one location to another, before putting on or taking off parts, and before cleaning.
- Avoid contacting moving parts.
- Do not operate in the presence of explosive and/or flammable fumes.
- Do not place the fan or parts near an open flame, cooking or other heating appliance.
- Do not operate the fan with a damaged cord, plug or after the fan malfunctions or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by manufacturer may be hazardous.
- Do not use outdoors.
- Do not let cord hang over the edge of a table or counter, or let it touch any hot surfaces.
- To disconnect, grip plug and pull from wall outlet. Never yank cord.
- Always put it on a dry level surface.
- Do not hang or mount the fan on a wall or ceiling.
- Do not operate without fan grilles properly installed in place.
- This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit fully in the polarized outlet only one way. If the plug does not fit, contact a qualified electrician. DO NOT attempt to defect this safety feature.
TECHNICAL SPECIFICATIONS
| Model No | ES10087US-BK |
|---|---|
| Voltage | 120V AC |
| Frequency | 60Hz |
| Rated Power | 67W |
PRODUCT OVERVIEW
A. Main Unit
B. Feet
C. Control Knob
D. Power Cord
Product Assembly
Before connecting the product to the power supply, check that the power supply voltage and current rating are consistent with the power supply details shown on the product’s rating label. Attach the feet (B) at the bottom side of the main unit (A).
Operation
Switching on/off
-
Connect the power plug (D) to a suitable outlet.
-
To switch the product on, turn the control knob (C) to the designated speed:
1.Low 2. Medium 3. High -
To switch the product off, turn the control knob (C) to 0.
User Servicing Instructions
Fuse replacement
NOTICE The product requires a 2.5 A,125 V fuse.
-
Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord. -
Slide open fuse access cover on top of attachment plug towards blades.
-
Remove fuse carefully by using a small screwdriver to pry the fuse out of the compartment by the metal ends of the fuse.
Cleaning and Maintenance
WARNING Risk of electric shock! To prevent electric shock,unplug the
product before cleaning.
WARNING Risk of electric shock! During cleaning, do not immerse the
product in water or other liquids. Never rinse the product under running
water.
Cleaning
To clean the product, wipe with a soft, slightly moist cloth. Dry the product
after cleaning.
Never use corrosive detergents, wire brushes, abrasive scourers,metal or sharp
utensils to clean the product.
Storage
Store the product in its original packaging in a dry area. Keep away from
children and pets.
Maintenance
Any other servicing mentioned in this manual should be performed by a
professional repair centre.
TROUBLESHOOTING
| Problem | Solution |
|---|---|
| The product can not be switched on. | Check if the power plug (D) is connected |
to the proper outlet.
Check if the socket outlet works.
Wait for the product to cool down.
Replace the fuse in the power cord plug.
The product vibrates.| Place the product on a level surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>