CPD GROUP Cam.G Field Camping Outdoor User Manual

CPD GROUP Cam.G Field Camping Outdoor

How to use

1. Press and hold the Cam.G power for 3 seconds to turn it on.
2. LED is on and LCD screen displays information at the same time.
3. Press the upper right button briefly to switch to each mode screen.
4. If you press and hold the upper right button, the emergency bell sounds, and press and hold again to turn it off.
5. When using the app connection, search for ‘camg’ in the Android Play Store or iOS App Store and download it.
6. When installing the app, select Always allow the location function, and turn on the location function (GPS).
7. After turning on the product, run the app and connect the product and the app by pressing the ‘Connect to product via Bluetooth’ button at the top of the app home screen.
8. In case of an alarm situation, you can stop the alarm for 5 minutes by pressing the setting button on the upper right, and if the alarm situation continues after 5 minutes, the alarm will sound again.
9. For detailed app functions, refer to the help function within the app.

How to use the reset function

1. If the product stops during operation or does not work smoothly, it can be restarted by resetting it.
2. Press and hold the power button for more than 7 seconds.
3. When the product starts to turn on again after the screen turns off, release the power button press.
4. You can check that the reset has been performed normally.

Names and functions of each part

Cam.G App

• Connection screen
  • Product registration function
  • Product name change function
• Home screen
  • Monitoring function
  • Emergency bell ON/OFF function
• Setting screen
  • Option setting function such as alarm

Cam.G Field

– Short press the setting button to change the information screen

– Press and hold to turn the emergency bell ON/OFF

– Short press to stop beeping for 5 minutes

1| · Upper left button

– Press for 3 seconds: Power ON/OFF

– Press and hold for more than 7 seconds: RESET

2| · Upper strap hanger
3| · Left charging jack

– USB C-TYPE

4| · OLED information display window
5| · Beep hole on the back
6| · Bottom air hole
7| · LED indicator

Precautions when using the product

1. For smooth air circulation, the air hole at the bottom must always be open, so it does not provide a waterproof function. Exposure to water or moisture may cause malfunction.
2. When using the carbon monoxide function, it is recommended to install it slightly higher than the sleeping position and as close as possible.
3. Immediately after charging, accurate measurement of temperature and humidity may be affected due to heat generation.
4. The average distance of Bluetooth communication is 10m and may be cut off depending on obstacles.
5. At temperatures below zero degrees Celsius, the battery can be rapidly consumed, and leaving the product in temperatures below zero degrees Celsius for a long period of time can cause malfunctions.
6. After turning on the power, a certain amount of time is required for accurate temperature and humidity measurement.
7. Due to the nature of the CO2 sensor, it is difficult to measure accurately at temperatures below zero degrees Celsius.

Measurement information level indication criteria

Product Specifications

1. Product name (model name): Cam.G Field (CAMG-F1000)
2. Weight, size: 78g, 659229mm
3. Battery Specification: DC 3.7V (880mAh)
4. Charging specification: DC 5V 2A (USB C-TYPE)
5. Charging time: 1 hour 30 minutes
6. Usage time: 20~100 hours (depending on usage mode)
7. Loudness: 105dB
8. Bluetooth Specification: Bluetooth 5.0 LE

Define usage time

Composition of the product

Example of use

• For accurate sensing, mount it so that the air hole at the bottom of the product s not blocked.

Handling Precautions

1. Please do not use in the vicinity of high temperature such as fire or heating equipment. It may cause an explosion or fire.
2. Do not store or use in a vehicle exposed to direct sunlight. It may cause an explosion or malfunction.
3. Do not use under -10 degrees Celsius or above 50 degrees Celsius.
4. Do not place it within the reach of infants and children. It may cause injury or electric shock.
5. Never insert any metal into the terminal of the charging connector. It may cause an explosion or electric shock. Disassembly or modification is absolutely prohibited.
6. Do not touch the connector part with wet hands. There is a risk of electric shock.
7. Be sure to turn off the power after use and store it. It may cause product damage.
8. If the product body is dropped or impacted, damage may accumulate inside the product and unexpected malfunction may occur even in normal use. Be careful not to apply an impact to the body.
9. Never disassemble the product. Disassembly will damage the product and you will not be able to receive after-sales service.

“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” “In accordance with FCC 15.21, changes or modifications not expressly approv ed by the party responsible for compliance could void the user’s authority to operate the equipment.”

Display and alarm by screen

1. CO generates alarm

Shows the higher level| regardless of setting
between CO and CO2| 2. CO2, temperature, humidity require alarm
 | activation
|  | 1. CO generates alarm regardless of setting

CO measurement status display

| 2. CO2, temperature, humidity require alarm activation
 | 3. CO2 alarm only occurs when the app is connected
|  |

1. CO generates alarm

CO2 measurement status display| regardless of setting

2. CO2, temperature, humidity require alarm

 | activation

Contact Information

• 1211ho, Incheon IT Tower, 229, Gyeongin-ro, Michuhol-gu, Incheon
• T. +82-32-873-7307
• F. +82-507-713-8627
• E. mklee@cpdgroup.kr.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>