boAt AD281 Pro Airdopes 281 Pro Bluetooth Truly Wireless In Ear Earbuds User Manual

boAt AD281 Pro Airdopes 281 Pro Bluetooth Truly Wireless In Ear Earbuds

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 281 Pro. Please consider this manual as your guiding map toward the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend a thorough reading of this manual; also, you may refer to the same at times when you face any sort of difficulty in future.

In the box

• 1x Pair of TWS Earbuds
• 1x Charging Case
• 2x Pairs of Additional Earmuffs
• 1x Type-c Charging Cable
• 1x User Manual
• 1x Warranty Card
• 1x Catalogue

Power On (First Time User)

Step 1: To switch the eartbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IWP (Insta Wake N’Pair) Technology enables the earbuds to power on automatically, get connected and enter into the connection mode

OR
Long touch the CTC on both earbuds for 3 seconds to manually power on the earbuds

Step 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode, indicated by red and blue LED flashes

Connection Mode
Step 3: Turn on the Bluetooth functionality on your phone/media device and scan

Step 4 : Search for Airdrops 281 Pro’ and pair accordingly with Bluetooth Congratulations! Your earbuds are now connected to Bluetooth ON Devic Airdrops 281 Pro successfully via Bluetooth

Note:

• Pairing mode lasts for 5 minutes. If the poiring time is missed then you will need to reconnect the ear-buds and folow the above-mentioned procedure
• Airdrops 281 Pro remembers previously connected devices once switched on, the earbuds automatically reconnect to the previously connected devices

Single Earbud Usage

• Step 1: Please note that both the earbuds can be used i mono mode. Use Smart Power On or Manual Power On for switching on the desired earbud
• Step 2: The selected earbud will automatically enter the connection mode indicated by red and blue LED flashes
• Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 281 Proto connect

Notes:
To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usag You cannot skip tracks or return to the previous tracks in Mono mode

LED Indicators/Functionalities

• 2 Seconds Long touch either CTC for 2 sec to  activate voice assistant Long touch both CTCs for 3 seconds to manually power on
• 3 Seconds Long touch either CTC for 5 seconds to manually power off
• 5 Seconds Long Press the reset button for up to
• 10 Seconds Long Press the reset button for up to10 sec to perform factory reset

Charging The Earbuds

• Step 1 : Please insert the earbuds back inside the charging case incorrect orientation.
• Step 2: A solid red LED indicates that the earbuds are being charged. Once fully charged the LED turns off
• Step 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.
  Note: Before using the ear-buds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed włhile charging

Charging The Case

• Step: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ power bank, etc. The case LED turns red during charging and once fully charged all the LED stay solid

Remaining Battery LED Indicator

Note: The LED lights located on the charging case indicate the battery status of the case.

Basic Functions

• Voice Assistant: Long touch the CTC on either earbud for 2 seconds to activate the voice assistant
• Answer/Hang Up Call: Single tap the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call
• Reject Call: Long touch the CTC for up to 1.5 seconds to reject incoming calls
• Play/Pause Music : Single tap the CTC on either earbud to play or pause music
• Next Track: When playing music, double-tap the right CTC to skip to the next song
• Previous Track: When playing music, double-tap the left CTC to return to the previous song

Voice Assistant

• Step 1: Long touch the CTC on either earbud for 2 seconds to activate the smart voice assistant
• Step 2: The respective voice assistant screen pops up and you may place your commands at ease
  Tips :You may try out the following commands,

Smart Power Off

• Step 1: After usage, remove both the earbuds from your ears
• Step 2: Place the earbuds back into the charging case in correct orientation
• Step 3: The earbuds will automatically switch off (and enter into charging mode)

Manual Power Off

• Step 1: Long touch the CTC on either earbud for 5 seconds
• Step 2: Once the earbuds get turned off, place them back inside the case and close the lid

Factory Reset

Perform the Factory Reset in case you face any difficulty while operating your Airdopes 281 Pro
NOTE: Before performing reset, clear “Airdopes 281 Pro” from pairing device history by forgetting the device

• Step 1: Place both the earbuds back inside the charging case incorrect orientation and don’t close the case lid at this moment
• Step 2: Long press the Reset Button on the charging the case for up to 10 seconds to do a factory reset, which is indicated by the flashing of red LED on the charging the case for 2 seconds.
• Step 3: Close the lid of the case and then after a few seconds reopen it. The earbuds automatically restart. Congratulations! Your Airdopes 281 Pro has been Reset

TROUBLESHOOTING

SPECIFICATION

Warning

• Please follow the instructions to operate
• Please don’t use the ear-buds in extreme temperatures
• Please don’t use the product near water
• Please keep the product away from heat sources, as the heat may damage it
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life

Advisable : The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switched on at first. This can be done by using the volume control on the media device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>