PROSEGUR IPC-A22E-S2 Network Camera User Guide
- June 4, 2024
- PROSEGUR
Table of Contents
PROSEGUR IPC-A22E-S2 Network Camera
Foreword
General
This manual introduces the functions and installation of the camera.
Safety Instructions
The following categorized signal words with defined meaning might appear in
the manual.
About the Manual
- The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail.
- We are not liable for any loss caused by the operations that do not comply with the manual.
- The manual would be updated according to the latest laws and regulations of related regions. For detailed information, see the paper manual, CD-ROM, QR code or our
- official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail.
- All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the
- manual. Please contact the customer service for the latest program and supplementary documentation.
- There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, please refer to our final explanation.
- Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
- All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners.
- Please visit our website, contact the supplier or customer service if there is any problem occurred when using the device. If there is any uncertainty or controversy, please refer to our final explanation.
- The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shll prevail.
- We are not liable for any loss caused by the operations that do not comply with the manual.
- The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code
- or our official website. If there is inconsistency between paper manual and the electronic version, the electroniC version shall prevail
- All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the
- manual. Please contact the customer service Tor the latest program and supplementary documentation.
- There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, we reserve the right of final
- explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
- All trademarks, registered trademarks and the company names in the manual are the properties
- of their respective Owners.
- Please visit our website, contact the supplier or customer service if there is any problem Occurring when using the device.
- If there is any uncertainty or controversy, we reserve the right of final explanation.
Packing List
- Please open the package and check if all the components are included before installation.
- Contact your local retailer if anything is broken in your package.
Product Introduction
For the introduction of the device, see Figure 2-1 and Figure 2-2
.
Press and hold the reset button for 10 s to reset the device.
The pattern of the LED indicator is included in Table 2-1.
Table 2-1 LED indicator pattern
Installing Device
Make sure that the mounting surface is strong enough to hold at least three
times of the camera weight.
For the installation diagram and item list of the camera, see Figure 4-1.
Figure 4-1 Installation diagram
Step 1 Drill screw holes on the mounting surface as the positioning map
shows, and then put in the expansion bolts.
Step 2 Attach the mounting plate to the mounting surface with the self-
tapping Screws.
Step 3 Attach the camera to the mounting plate, power it up, and then
adjust the lens to the ideal angle.
Legal and Regulatory Information
Legal Considerations
This product can be regulated by laws that vary from country to country.
Check the laws in your local region before using it.
Disclaimer
Every care has been taken in the preparation of this document. Please contact
us through the following contact information of any inaccuracies or omissions.
Prosegur shall not be held responsible for any technical or typographical
errors and reserves the right to make changes to the product and manuals
without prior notice. Prosegur makes no warranty o any kind Witn regard to the
material contained within this document, including, but not limited to the
implied warranties of merchantability and fitness for a particular purpose.
Prosegur shall not be lable or responsible for incidental or consequential
damages in connection with the furnishing, performance or use of this
material. This product is only to be used for its intended purpose.
Intellectual Property Rights
Prosegur retains all intellectual property rights relating to technology
embodied in the product described in this document.
Equipment Modifications
This equipment must be installed and used in strict accordance with the
instructions given in the user documentation. This equipment contains no user-
serviceable components. Unauthorized equipment changes or modifications will
invalidate all applicable regulatory certihcations and approvals.
Regulatory Information
European Directives Compliance
- This product complies with the applicable CE marking directives and standards:
- Low Voltage (LVD) Directive 2014/35/EU.
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
- Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending
- Directive (EU) 2015/863.
CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032.
CE-Safety
This product complies with IEC/EN/UL 62368-1, Audio/vide0, information and
communication technology equipment – Part 1: Safety requirements and IEC/UL
60950-1: Safety of Information lechnology Equipment
Declaration of Conformity CE
(Only for the product has RF function) Hereby, Prosegur declares that the
radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU.
Privacy Protection Notice
As the device user or possible data controller, you might collect personal
data of others such as face, fingerprints, car plate number, Email address,
phone number, GPS and so on. You need to be in compliance with the local
privacy protection laws and regulations to protect the legitimate rights and
interests of other people by implementing measures, including but not limited
to: providing clear and visible identification to inform data subject the
existence of surveillance area and providing related contact.
Support
Should you require any technical assistance, please contact your Prosegur
distributor. If your questions cannot be answered immediately, your
distributor will forward your queries through the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
Download user documentation and software updates. Search by product, category,
or phrase.
Safety Requirement
- Abide by local electrical safety standards to ensure that the voltage is stable and complies With the power supply requirement of the device.
- Transport, use, and store the device under the allowed humidity and temperature conditions.
- Refer to the corresponding technical specifications of the device for specific working temperatures and humidity.
- Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting conditions.
- Do not install the device in a place near the heat source, such as a radiator, heater, furnace, or another heat-generating device to avoid fire.
- Prevent liquid from flowing into the device to avoid damage to internal components.
- Install the device horizontally or install on a stable place to prevent it from falling.
- Install the device in a well-ventilated place, and do not block the ventilation of the device.
- Do not disassemble the device arbitrarily.
- Avoid heavy stress, violent vibration, and soaking during transportation, storage, and installation. The complete package is necessary during the transportation.
- Use the factory package or the equivalent for transportation.
Battery
- Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s
- server report. For more information about the server report, see the product’ s setup pages or contact Prosegur support.
- Risk of explosion if the battery is incorrectly replaced.
- Replace only with an identical battery or a battery which is recommended by Imou
- Dispose of used batteries according to local regulations or the battery manufacturer’s Instructions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>