amped wireless AP600EX High Power Wireless N 600mW Pro Access Point User Guide

amped wireless AP600EX High Power Wireless N 600mW Pro Access Point

Find a location for installation

View the package insert for instructions on how to optimally position the Pro Access Point.

• INDOOR SETUP
  Indoor range will be limited.
  

• OUTDOOR SETUP
  See back side for mounting instructions.
  

Connect the Pro Access Point to your Router or Network Switch

• a. Open the lid of the Pro Access Point and check that the PoE cable is securely fastened to the port.
• b. Locate the PoE Adapter and connect the 30 ft PoE cable to the port on the PoE adapter.
• c. Locate the power adapter and connect one end to a power outlet and the other end to the  port on the PoE adapter.
• d. Locate the shorter network cable and connect one end to the port on the PoE adapter and the other to your router’s network (LAN) port, or a network switch.

Note: If you plan to use your own network cable, ensure that the cable is a Non-PoE cable to avoid power conflict issues.

Allow up to two (2) minutes for the Pro Access Point to automatically configure itself to your network.

Connect your Computer to the Pro Access Point

Wireless Connections:

Scan for available wireless networks on your PC and connect to the following network:

Wired Connections:

Attach any Wired Devices to the Pro Access Point using an Ethernet cable.

CONGRATULATIONS, YOU’RE DONE!

The instructions below are optional. You may now use your Pro Access Point without any additional configurations. However, if you wish to change any settings (such as network ID and security) for the Pro ! Access Point, follow the instructions below to access the configuration menu of the Access Point.

Note: If your network uses static IP address assignments, you will need to manually configure the settings for your Pro Access Point. See the instructions on the back to access the configuration menu of the Access Point.

Optional Configurations: Accessing the Settings Menu

Scan for available wireless networks on your PC and connect to the following network:

If you do not wish to connect wirelessly, you may also use a wired connection between the Access Point (LAN Port) and your computer to access the Settings Menu.

Open your Web Browser

Enter the setup web address into your browser: http://setup.ampedwireless.com 
If the URL fails to open, then try: http://192.168.1.240

Welcome to the Smart Setup Wizard

The Smart Setup Wizard will guide you through the following settings:

1. System Clock
2. Wireless Network SSID
3. Wireless Network Security Key

Click Start to begin.

Set the System Clock Time

The System Clock is used for system logs and setting schedules for Internet access. Click Sync to synchronize the System Clock with the time on your computer.

Click Next to continue.

Wireless Network ID

The ID of your Wireless Network is: Amped_Pro_AP

To change it, enter a new name in the SSID field. Users connecting wirelessly to the Pro Access Point will use this ID to identify your wireless network.

Click Next to continue.

Wireless Network Security

The default Security Key (WPA) of your wireless network is: wireless

To change it, enter a new key in the Security Key field. The key must be at least 8 characters long.

Click Next to apply your settings.

The Pro Access Point will reboot. This process may take up to 2 minutes. The page will automatically reload after the countdown. If it does not, you may need to reconnect to the Access Point and refresh the page manually.

Setup Summary

The Setup Summary provides you with information regarding your current settings.

If you have wired network devices, you may attach them to the wired ports on the back of the Pro Access Point for additional wired connectivity.

How to Connect your Wireless Computer to the Pro Access Point

Windows 7 & Vista

A. Click on the Wireless icon to see available wireless networks (For Vista, click Start > Connect To). Select the “Amped_Pro_AP” network and click Connect.

B. When prompted, enter the wireless security key “wireless” and click OK.

Mounting Instructions

• WALL MOUNTING
  a. Place the AP600EX against the wall, use a pencil and mark two pilot locations through the mounting hole on the wall.
  b. Remove the AP600EX and securely drill two screws where you have marked on the pilot location’s wall.
  c. Now, mount the unit onto the secured screws.
  

• DESKTOP MOUNTING
  a. Place the stand in an optimum location.
  b. Secure the AP600EX onto the desktop mount.

• POLE MOUNTING
  a. Place the AP600EX against the pole.
  b. Use the included hose clamp or plastic tie and secure the AP600EX to the pole by inserting one side of the clamp through the smaller hole located on the bottom of the mounting bracket. If using the hose clamp, use a screw driver to fasten the clamp until the adapter is securely mounted.

Using the Smart Features on your Pro Access Point

The Pro Access Point is equipped with many powerful security features which can be accessed through the web menu under More Settings > Smart Features on the left side of the web menu:

Wireless Access Scheduling
Control when your WiFi is on/off
Menu Location: More Settings > Smart Features > Access Schedule

User Access Control
Restrict network access to specific users
Menu Location: More Settings > Smart Features > User Access

Wireless Coverage Control
Adjust the distance of your wireless network
Menu Location: More Settings > Smart Features > Wireless Coverage

If you are unfamiliar or want more information on how to set up Smart Features, please refer to the User’s Guide on the included CD.

Setting a Static / Manual IP for your Pro Access Point

If your network uses Static IP settings, you will need to set a static IP address for your Pro Access Point. To do this, access the More Settings > IP Settings menu from the navigation menu and select Disabled from the DHCP drop down menu. Next enter the IP information as it relates to your network. Click Apply and reboot when you are done.

How to Reset the Pro Access Point to Default Settings

The Pro Access Point can be reset to default settings by holding down the Reset button on the Power over Ethernet (PoE) Adapter for 5-10 seconds. To simply reboot the Pro Access Point, press the Reset button for 1 second and release.

Note: Pro Access Point must be connected to the PoE adapter for the Reset button to function.

Using an External Antenna

For additional range and coverage, the AP600EX comes with the option of using external antennas instead of the high power internal antenna. To use the external antenna, attach the antenna and log on to the web menu to activate the external antenna port:

• a. Remove the lid covering the external antenna port and attach external antenna to the Pro Access Point.
  b. Enter the setup web address into your web browser:

• If the URL fails to open, then try: http://192.168.1.240
  http://setup.ampedwireless.com

• c. Click on More Settings, then select Wireless Settings. Select Antenna Settings from the drop down menu. Check External Antenna to activate the external antenna and click Apply.
  

Troubleshooting Tips

PROBLEM: I entered http://setup.ampedwireless.com and it failed to open the Web Menu.

SOLUITIONS:

• a. Make sure your computer is connected to the Pro Access Point wirelessly and NOT using a network cable. Ensure the power is plugged in and on. Try to access the setup menu again.
• b. Enter the following web address into your web browser: http://setup.ampedwireless.com
• c. Power off (unplug the power adapter) the Pro Access Point and power it back on. Try again.
• d. Reset your Pro Access Point to default settings by holding the Reset Button (located on the back panel) for five to ten (5-10) seconds only and try again.

PROBLEM: The Pro Access Point is not functioning and the Power LED keeps blinking.

SOLUITIONS:

• a. The network (Ethernet) cable you are using is not compatible with the Pro Access Point. Replace the network cable between the PoE Adapter and your router/switch with a Non-PoE cable.
  Tip: How to check whether your cable is a PoE cable or a Non-PoE cable: Check the connector tip of the network cable to see if there are 4 wires or 8 wires. Non-PoE cables have only 4 wires.

• b. If you have a computer or network device attached to the LAN port of the Pro Access Point, check that the cable is a Non-PoE cable. Some unsupported PoE devices may cause power conflicts with the Pro Access Point.

PROBLEM: I do not have Internet access when connecting to the Pro Access Point

SOLUITIONS:

• a. Your router or original network may not have Internet access. First check to see if you are able to access the Internet by connecting directly with your router. If you cannot, there is a problem with your router that needs to be fixed first. If you are able to access the Internet, continue with the following troubleshooting options below.
• b. Check that the Pro Access Point is correctly connected to your router or network switch. The router should be connected to the Network port on the PoE Adapter (not directly to the Pro Access Point). The PoE adapter should be connected to the Pro Access Point’s PoE port. After the connection has been established, allow up to 2 minutes for the Pro Access Point to configure itself to your router’s settings.
• c. Your router may be using Static IP assignments. If so, you will need to configure a Static IP for the Pro Access Point. Connect your PC to the Pro Access Point using an Ethernet cable. Disconnect your PC from any wireless networks that it may be connected to. Access the web menu at setup.ampedwireless.com using a web browser. Access the IP settings menu from the left hand navigation bar. Select ‘Disabled’ under the DHCP dropdown menu and enter an IP address that matches your router’s IP settings.

Customer Support

Amped Wireless
A Division of Newo Corporation
Copyright © 2011 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.

If you have any questions during the setup process please contact Amped Wireless support department:

Phone: 888-573-8820
Email: techsupport@ampedwireless.com
Web: www.ampedwireless.com/support

References

• ampedwireless.com/support
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>