CB110 Sunny Fit Bike Cadence User Manual
- June 14, 2024
- Sunny
Table of Contents
CB110 Sunny Fit Bike Cadence
PRODUCT INTRODUCTION
We thank you for choosing our Sunnyfit Bike Cadence. Our product is developed to help track your cycling performance. Please keep this user manual for future reference.
PRODUCT ACCESSORIES
BASIC PARAMETERS
| Product Si ze : | 1.65 x 1.57 x 0.43 inches |
|---|---|
| Net Weight: | 0.03 lbs |
| Battery type: | CR2032 220 mAh |
| Battery Life: | 240 Hrs {based on 1 hour/day) |
| Color: | Black |
| COMM: | ANT+/785 inches BLE+/1181 inches |
| Water Rating: | IP67 |
| O uter Case: | ABS |
For assistance with parts or troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-907-8 669) or scan QR code above to get the latest update.
REMOVE THE INSULATING SHEET BEFORE USING
- Turn the battery cover counterclockwise toward a big circle to open it. Please remove the insulating sheet before using it, then put the battery cover back and turn clockwise toward a small circle to lock it.
Flashing Indicator Light
P ower on :
Wake up · Standby·
| Blue/Red lioht will flash oncew i thin 10 seconds after power on.
Blue/Red liaht will flash 6 times within 3 seconds after wake uo. Blue/Red light will flash 2 times every 1 O seconds.
---|---
Connect:| Blue/Red light will flash onceevery 1S seconds.
INSTALLATION
Attach the Flat Rubber Mat onto the back of the SunnyFit Bike Cadence then secure with a Small Band or Plastic Cable Tie onto the pedal crank
APP CONNECT INSTRUCTION
-
Scan the below QR code to download the SunnyFit APP.
-
You can also download the SunnyFit APP from the App Store or Google Play Store.
If you are unable to replicate these steps or have any other issues with the SunnyFit app, please contact SunnyFit support at [email protected], or use the in-app “Contact Us’ form to request support (“Me” tab -> “Contact Us”). -
Rotate the pedal crank and search for the SunnyFit Bike Cadence using ANT+ or Bluetooth device. Follow the steps on the SunnyFit APP and choose the bike accordingly.
-
Go the “Workout” tab, choose “Indoor” or “Outdoor” then click “Search”. You should see the SunnyFit Bike Cadence (CB110) appear. Press “Select” and you will be prompted to choose your Bike.
-
For Indoor: Press “Select” to choose your Bike from the list, then press “Select” once more to bind.
-
For Outdoor: Press “Select” to choose your Outdoor Bike from the list, then press “Select” once more to bind.
NOTE : If you select the “OUTDOOR BIKE” on the SunnyFit APP. the SunnyFit Bike Cadence will change to Speed mode. Please remove the SunnyFit Bike Cadence from the pedal crank. Attach the Curved Rubber Mat onto the back of the SunnyFit Bike Cadence, then secure the SunnyFit Bike Cadence with a Large Band or Plastic Cable Tie onto the flywheel axle.
DISCLAIMER
- The information on this manual is for reference only. This product may be subject to change based on the manufacturer’s research and development without notice.
- We shall not make any statement or warranty about this manual or the product.
- We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or it connection with this manual or the product.
CONNECT WITH US FOR FITNESS ARTICLES, VIDEOS & WORKOUTS