Pohl Schmitt KE-100 Electric Kettle Instruction Manual
- June 14, 2024
- Pohl Schmitt
Table of Contents
Electric KETTLE
Model No. KE-100
Instruction Manual
IMPORTANT SAFEGUARDS
| Carefully read all instructions before the operation and save for future
reference.
---|---
| Check if the voltage indicated on the rating plate of the appliance
corresponds of the voltage you have. You are advised not to use a multiple
adapter plug or extension cord.
| Do not place the kettle near the edge of a table or kitchen counter. Ensure
that the surface is flat, clean, and dry.
| Do not place on or near a hot gas or electric burner or in a heated oven.
This can cause possible damage.
| Always ensure the kettle is assembled correctly before operating, and filled
with water before connecting to a power outlet.
| Unplug from outlet when not in use. Allow cooling for a couple of minutes
before cleaning the appliance.
| Close supervision is necessary when any appliance is used by or near
children. Please use and keep the kettle and its supply cord out of the reach
of children.
| Do not use outdoors.
| When operating the kettle for the first time, pour the initial boiled water
out. After the water is poured out, the kettle is ready for use
| Do not immerse cord, plug, base, or kettle in water or other liquids. This
can cause fire, electric shock, and severe injuries.
| CAUTION: We do not recommend using an extension cord, but if it is
necessary, a proper gauge extension cord rated for the appropriate
voltage/current must be used. Please pay extra attention that nobody trips
over the extension cord and that it is not overheating!
SAFETY INSTRUCTIONS
- This appliance has been designed for boiling and heating water only. Do not use this appliance to boil or heat any other liquids.
- Fill the kettle with water only to the “MAX” fill line. Do not overfill.
- Do not let the power cord hang over the edge of a table or work surface to prevent the appliance from falling.
- Do not operate the appliance with a defective cord or plug. Return it to the nearest authorized service center for examina- tion, repair or adjustment.
- Remove the plug from the outlet immediately if you notice that the kettle is not operating correctly.
- Do not pull on the power cord to remove the plug. This can cause damage to the unit.
PARTS
OPERATING
- Remove the kettle from the power base and open the lid by pressing the lid release button on top of the kettle. Fill with the desired amount of water. NOTE: Always fill the kettle between the minimum “MIN” and maximum “MAX” fill water lines. Filing below the minimum water line will result in the kettle automaticity switching off. If the water is above the maximum fill line, boiling water may spill out.
- Place the kettle securely onto the power base and check that the lid is closed correctly before use.
- Plug the kettle into the outlet.
- To start the kettle, press down the ON/OFF switch, and the blue indicator lamp will light up. The kettle will begin to heat up.
- The kettle will automatically switch OFF when the water has boiled. You can stop it manually by pressing the ON/OFF switch, before removing it from its power base to pour out the water. NOTE: Allow the kettle to cool down for a couple of minutes before re-filling.
CARE & CLEANING
Cleaning the kettle
Before cleaning the kettle, read the “Important Safeguards” carefully.
- Unplug the kettle from the power outlet. Allow the kettle to cool down completely before cleaning.
- Wipe the body of the kettle with a damp cloth and dry completely with a soft dry cloth. NOTE: Never immerse the kettle, its base, or the cord/electric plug-in water. The electrical connections or the switch must not come into contact with water. NOTE: Do not use scouring pads. This can cause damage to the unit.
- Clean the kettle with gentle dish soap. We do not recommend using strong chemicals such as acid or cleansers.
- Descale the kettle regularly.
De-scaling
Make sure to de-scale regularly. We recommend once a month or more if your
water is very hard.
-
Fill the kettle to the “MAX” fill line with white vinegar and let it stand for 1 hour.
DO NOT turn on the kettle while m vinegar is in the pot. -
Pour vinegar out and fill the kettle with water to the “MAX” fill line and then boil the water.
-
Empty the kettle and rinse 5 or 6 times.
Storage
Ensure the kettle is switched off, clean and dry before storing.
Ensure the lid is firmly closed then stand the kettle in an upright position
on the power base. Do not place anything on top.
Your satisfaction is guaranteed. If you are not completely satisfied with our
Glass Kettle and the results it brings, we insist that you let us know. We’ll
help you make the Glass Kettle work for you, or we’ll refund your money.
TECHNICAL DATA
RATED VOLTAGE 120V, 60 Hz
POWER 1500 W
CAPACITY 1.7L/ 5750z
Correct Disposal of this product
** This product should not be disposed of with other household waste. To
prevent possible harm to the environment or human health, recycle the unit. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take care of
environmental safe recycling
1-Year Limited Warranty
** This product is warranted to be free from defects in material and
workmanship under normal use and service for 1 year from the date of original
purchase with receipt. The manufacturer’s obligation shall be limited to
repairing or replacing, any part of the product that is defective. Such
warranty shall not apply to damages resulting from accidents, abuse or misuse.
POHL+SCHMITT
63 37 East 18th, Floor 7, New York, NY 10003
Telephone: 877-899-8189
64 E-mail: support@pohlschmitt.com
Web: pohlschmitt.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>