POHL SCHMITT PS-CO111 Electric Can Opener Instruction Guide
- June 9, 2024
- Pohl Schmitt
Table of Contents
POHL SCHMITT PS-CO111 Electric Can Opener
Specification
- Brand**** POHL SCHMITT
- Model**** PS-CO111
- Package Dimensions 10.2 x 6.73 x 5.47 inches
- Item Weight 2.57 pounds
- Connectivity Electric
- Special Features Can Opener, Knife Sharpener, and Bottle Opener
What’s In the Box
- Electric Can Opener
Important Safeguards
- The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- This appliance is intended for household use only. It is not suitable for commercial/industrial use.
- Do not use this appliance outdoors or in areas with high humidity.
- Do not use the appliance for any other use than its intended purpose, and only use it as described in this manual.
- Improper installation and the use of accessory attachments not recommended or sold by the appliance manufacturer may cause injuries.
- Do not place the appliance near the edge of the counter.
- Do not leave the appliance unattended while in use. Always disconnect it from the power outlet.
- Avoid contact with moving parts.
- Do not open pressurized cans.
- Do not open cans of flammable liquids such as lighter fluids.
- This can opener should not be used to open cans designed to open by another method, such as a pull tab,peel-off foil seal, or rolling key.
- This can opener should not be used to open rimless cans or cans with angled corners.
- If there is a dent in the rim of a can, open the other end or start the cutting action just beyond the dent.
Before First Use
- Unpack the appliance but keep all packaging materials until you have made sure your new can opener is undamaged and in good working order.
- Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach.
Using the Can Opener
-
To attach the blade bracket to the can opener, make the key tabs align with the key slots, push it frontward to fix it (see Fig. 1), then press down the blade bracket to ensure it has been assembled in place (see Fig. 2). Then lift the blade bracket.
-
Unwind the cord to its full length and inspect it for damage. Do not use the appliance if the appliance or its cord have been damaged or is not working properly.
-
Place the appliance on a flat, dry surface.
-
Connect to the power source. Make sure that the can opener voltage (see rating plate) and the line voltage match.
-
Raise the blade bracket enough to wedge the can between the cutting blade and feed gear.
-
Press the bracket down all the way to pierce the lid and start the cutting process. When you push down the bracket the motor will start rotating the can.
-
When the can is opened, the can opener will stop automatically. To remove the can, hold it with one hand and raise the blade bracket with the other hand.
CAUTION: Avoid contact with the cut edges of the can or lids as they are sharp, carefully remove the lid from the magnet and discard.
Can Opening Tips
- This can opener should not be used to open cans designed to open by another method, such as a pull tab,peel-off foil seal, rolling key, rimless cans, or cans with angled corners.
- If there is a dent in the rim of a can, open the other end or start the cutting action just beyond the dent
Care and Maintenance
- Before cleaning any part of the can opener, unplug the cord.
- To remove the blade bracket for easy cleaning, lift the blade bracket up and pull it out. The blade assembly can be cleaned with a damp cloth, then wiped with a sponge, and dried thoroughly. It is not a dishwasher-safe component. Reverse the procedure to replace the blade bracket.
- Before replacing the blade bracket, wipe the can opener housing, and the area around the drive wheel with a slightly damp cloth or sponge. To remove stubborn spots, wipe surfaces with a nylon or mesh pad and sudsy water, followed by a clean, damp cloth. Do not use abrasive cleaners on any part of the can opener as they can damage the surface.
- Ensure the can opener is completely dry before the next use.
FAQs
What is the voltage requirement for this appliance?****
The voltage requirement for this appliance is 110-120V.
How many watts does this appliance consume?****
This appliance consumes 1000 watts of power.
Is there a warranty on this product?****
Yes, there is a warranty on this product for one year from the date of purchase.
What are the features of an electric can opener?****
Electric can openers operate with just the pull of a lever or press of a button; the gear mechanism pulls the can in tight while it spins under a dull blade, removing the top. These units are designed to accommodate a variety of can sizes.
How does a can opener make work easier?****
A lever like the paint-can opener helps you in two ways. It increases your input force and it changes the direction of your input force.
What is the proper maintenance of can opener?****
After each use, thoroughly wash your can opener with hot water and dish soap. Dry as thoroughly as you can with a towel to prevent rust. Let it sit with the handles open so the wheels can air-dry completely before putting it back in the drawer.
Do electric can openers work?****
Electric can openers make opening cans faster, easier, and safer. They’re particularly helpful for people who suffer from limited hand mobility or arthritis and anyone who frequently cooks using canned ingredients
How do you use a can opener or knife sharpener?****
Just turn the unit around to use the sharpener on the back. The large, push- down lever makes it easy for anyone to operate with one smooth motion. Just hold the lever down until the blade has made a full rotation around the can.
What are the uses of can opener?****
A kitchen utensil is used to open or remove the top from a metal can. There are a wide variety of different designs available ranging from manually operated small tools to automated openers that quickly and easily remove the top of the can.
What is the importance of an electric can opener?****
Because electric can openers are so efficient, they can keep cutting into the tin once the lid has been removed and leave shreds of sharp metal sticking out or in your food. An automated start/stop feature should stop this from happening
What kind of machine is can opener?****
A can opener is a machine composed of a lever, wheel and axle, and wedge.
Do you have to wash the can opener?****
Most handheld can openers can’t be put in the dishwasher. To clean them, wash them with soap and warm water after every use, and use a small brush to clean hard-to-reach areas, like the gears and blade, or caked-on food. Dry completely before storing to prevent rust.
How does an electric can opener know when to stop?****
Servicing the Switch: An electric can opener is turned on and off with a contact switch activated by the appliance’s operating lever. A defective switch may prevent the appliance from working at all.
How do electric can openers use magnets?****
In most cases, a magnet holds the can in place while it spins through a sharp blade, removing the top of a can at the push of a button or pull of a lever. As opposed to a manual can opener, an electric model takes care of holding the can, turning it, and cutting the top off for you.
How often should I use an electric knife sharpener?****
Knives should be sharpened once or twice a year. Professional knife sharpening is a safe and easy choice, but you can always sharpen your knives at home. To maintain the knife’s sharp edge, you also need to hone it daily. Sharpening and honing create a safe, sharp blade that can be used for years