AARDWOLF Aluminium Double Telescopic Ladder User Guide

**AARDWOLF Aluminium Double Telescopic Ladder User Guide

**

PARTS LIST

(A) 2 COUPLINGS
(B) 2 SLEEVES
(C) SUPPORT BAR
(D) 2 BOLTS
(E) 2 LOCK NUTS

MOUNTING INSTRUCTIONS FOR SUPPORT BAR

(A) INSERT SUPPORT BAR IN ROUND COUPLINGS SLOTS.
(B) INSERT SLEEVES IN ROUND COUPLING HOLES THROUGH SUPPORT BAR.
(C) INSERT ROUND COUPLINGS INTO LADDER ENDS. (BE SURE PADS FACE DOWNWARDS)
(D) INSERT BOLTS THROUGH RAILS AND SLEEVES.
(E) PLACE LOCK NUTS ON BOLTS AND TIGHTEN FULLY

EXTENDING THE LADDER

1. For telescopic step ladder With your two handle grip the ladder from both sides and pull upwards extending this section for your demand then pull the release rod to A frame position, locked the hinge.
2. For straight telescopic ladder Pull the release rod to straight position locked the hinge extended ladder step by step and reach this section for your demand.
3. For stairway telescopic step ladder With your two Handles grip the ladder from both sides and pull upwards extending this section for your demand, then pull the release rod to A frame position locked the hinge folded one side in night position for stairway

COMPACTING THE LADDER

When you have finished using the ladder you can retract it down to the storage size Folded the ladder, then close the ladder step by step with your both

handles .

STORAGE

The ladder must be stored in a safe dry location away from children and excessive heat.

WARNING! TO AVOID SERIOUS INJURY OR DEATH, PLEASE READ ALL THESE INSTRUCTIONS AND OBSERVE ALL WARNING LABELS ON THE PRODUCT BEFORE USE! KEEP MANUAL WITH THE PRODUCT FOR FUTURE REFERENCE.

IMPORTANT SAFETY INFORMATION!

• DANGER! METAL CONDUCTS ELECTRICITY! Do Not let this ladder or any of its parts contact live electrical wires.
• Maximum load for this ladder is 150kg. The weight of user plus tools and materials should not exceed 150kg.
• Always ensure that the locking mechanisms due to have weight placed on them are in the locked position before applying weight to the ladder. ALL the mechanisms should be locked if using the ladder at full extension!
• The ladder must be used with regular distances between the steps.
• Do Not use any attachments. Components or accessories not sold or recommended by the manufacturer with this ladder.
• Inspect the ladder after delivery, before use to confirm condition and operation of all parts. Inspect all parts prior to each use. Do Not use if any parts of the ladder are missing, damaged or worn in any way. For professional users regular periodic inspections are required.
• Ensure the ladder is suitable for the task. Do Not attempt to modify this ladder in any way. Doing so may result in serious injury, and will void the guarantee .
• Never attempt to repair a damaged ladder. Always have a qualified repair person repair the damaged ladder.
• Destroy ladder if exposed to excessive heat (such as in a house fire) or corrosive agents (like acids or alkalis).
•  Always use a firm grip and face ladder whenever possible.
• Always set up the ladder on a surface that is level. stable and dry. Never place the ladder on a slippery surface or try to increase the height or the ladder by placing anything under the rubber feet.
• Always ensure both rubber feet are firmly supported before stepping on the ladder. Observe extreme caution when using the ladder in windy, rainy, or icy conditions, or when using on a protective surface such as thick carpet or rug. This may prevent the rubber feet from gripping properly.
• Use caution when getting on or off ladder.
• Never use the ladder while under the influence of alcohol or drugs of any kind. The user should be in good physical condition to use this ladder.
• Never set up the ladder in front of doors that are not locked.
• Never use the ladder as a brace in any way.
• Do Not use ladder jacks with this ladder.
• Do Not use the ladder in a horizontal position, such as resting on a step.
• Do Not, open, close. or use the ladder upside down.
• The ladder must not be used hanging from the top rung Always transport in the compacted position.
• Avoid subjecting the ladder to knocks or rough treatment.
• Avoid using in water-fill wells (e.g.) as this could lead to a malfunction of the telescopic tubes.
• Pushing or pulling anything while on the ladder or scaffold may cause the ladder to tip and you to fall. Use extreme caution if you must push or pull from the ladder.
• Never attempt to jump, walk, or move ladder while on it. If you need to move the ladder, get off it first. Move it, then reposition yourself.
• To avoid losing your balance and/or tipping the ladder never overreach. Always stay balanced and keep your body centered between the side rails.
• Never place yourself or allow anyone to stand or work under the ladder while in use.
• This ladder is not a toy and not meant for use by or near children. Never leave the ladder set up and unattended.
• Do Not stand on the ladder while releasing the locking mechanisms.
• Never stand or climb closer than 3 feet from the top rung – you can lose your balance!
• Always wear shoes that have good grip while using this ladder. Avoid wearing loose clothing that could dangle and get caught.
• Remove any contamination such as wet paint, mud, oil or snow.
• Face the ladder when ascending and descending.
• For professional users’ regular periodic inspections are required.
• Maintain a handhold whilst working from a ladder. or lake additional safety precautions you cannot.
• If the ladder is used for access to a higher level it must extend at least 1m above the landing point. Only use the ladder at full extension as a leading ladder at an angle of 75.

THE LOCKING MECHANISMS

IMPORTANT! Familiarize yourself with how the ladder works before use.

• Each step on the ladder has a pair of locking mechanisms. These consist of spring-loaded steel pins that automatically lock into place as the ladder is extended.
• Each mechanism is connected to a locking lever visible on the outside **{see Fig.1).

** The locking levers have 2 purposes. They indicate whether the mechanism is locked (or not). and they serve as buttons for releasing the pins (lowering the ladder). A lever that is close to the side rail indicate!

• The mechanism is locked. A lever away from the side rail indicates that it is NOT locked (see Fig .2)
  
  CAUTION! The locking mechanisms may appear to audibly ‘click’ shut. but always visually check that the levers appear locked. The locking mechanism must be fully secured before use.

THE LOCKING MECHANISM MUST BE LOCKED BEFORE USING LADDER HINGE OPERATION

**To unlock hinge: Pull from center of Hinge Release Rod then let go.

**

To lock hinge: Move ladder to two hinges lock position. Mako sure to Lock Bolts lock. ln place on both hinges. Check the label on both. hinges to be certain they are locked. (If necessary move the ladder section slightly back and forth to ensure locking)

• Be sure all hinges are locked before using the ladder.
• Never use anything other than hand to lift up the hinge release rod.
• Never use hinge release rod to adjust, move, or transport ladder.
• Do not use this ladder if lock bolts do not lock in place.
• Keep hinges clean and free of dirt, paint, snow, etc.

The hinges in this ladder have been lubricated at the factory.

For best operation depending on actual use clean and lubricate hinges periodically with a light machine oil.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>