iLED DA1 1 Channel Constant Voltage DALI LED Dimmer Instruction Manual

Table of Contents

iLED-DA1-1-Channel-Constant-Voltage-DALI-LED-Dimmer-
PRO

Model No.: DA1
Product Name: Channel Constant Voltage DALI LED Dimmer
Features:
- Constant voltage DALI LED Dimmer with 1 channel
- DALI-2 certified, in accordance with DALI standard protocol IEC 62386-101, 102, 207
- Compliant with DALI products from other international incorporations
- Automatically assigned DALI address by DALI master (1 DALI address)
- PWM digital dimming with standard DALI logarithmic dimming curve
- Can be connected with external push switch for on/off and dimming function
- Multiple protection features: Over-heat, Over-load, and Short circuit protection (recover automatically)

Constant voltage DALI LED Dimmer with 1 channel.
DALI-2 certified, in accordance with DALI standard protocol IEC 62386-101, 102, 207 and in compliance with DALI products from other international incorporation.
DALI address will be automatically assigned by DALI master, 1 DALI address.
PWM digital dimming, standard DALI logarithmic dimming curve.
Connect with external push switch to achieve on/off and dimming function.
Over-heat / Over-load / Short circuit protection, recover automatically.

Input and Output

Input voltage| 12-48VDC
Input current| Max 15A
Output voltage| 12-48VDC

Output current

| 15A@12/24V

10A@36/48V

Output power

| 180W@12V 360W@24V

360W@36V 480W@48V

iLED-DA1-1-Channel-Constant-Voltage-DALI-LED-Dimmer-1

DALI Address Assigned by DALI Master
This product is designed with 1 DALI address input and 1 channel output, DALI address is assigned by DALI Master controller automatically, please refer to user manuals of compatible DALI Masters for specific operations
DALI priority
The DALI master or Push switch can be connected at the same time, which makes the product more user-friendly and more options to fit for some extra- ordinary demands. If the controller be used with the Push-Dim interface prior to using the DALI interface, the DALI command will make it return DALI control automatically.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:
Turn on or off light.
Long press (1-6s):
Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction.
Dimming memory:
Light returns to the previous dimming level when switched off and on again, even at power failure.
Synchronization:
If more than one controller are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 meters.