nu living WSTLP65BD 6.5 Kg Semi Automatic Top Load Washing Machine User Manual

nu living WSTLP65BD 6.5 Kg Semi Automatic Top Load Washing Machine

Dear Customer!

Congratulations on being the Proud owner of Nu Washing Machine. Your Washing Machine comes with a Nu Guarantee of Quality.

Nu   takes great pride in providing its customers with perfect products that adheres to international quality standards

Nu is committed to international quality standards.

Nu is committed to provide the ultimate customer satisfaction as nothing brings us greater joy than having satisfied customers of Nu .

Nu feedback and suggestions based on your product usage experience are greatly appreciated.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or ~ mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Don’t put hands into the tub when it’s working.

The power cord of Machine the is connected by Y shape. If must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

PARTS IDENTIFICATION

1. Water Inlet
2. Control Panel
3. Spin Lid
4. Wash Lid
5. Tub
6. Base
7. Drain Pipe
8. Castor Wheels
9. Power Cord
10. Hose Clamp
11. Inlet Hose

Safety Precautions

1. Make sure that the washing machine is plugged to a 3 pin/SA electrical outlet and earth terminal is provided on the outlet.
2. Unplug the power supply cord when you do not use it.
3. To disconnect the washing machine from electrical mains completely, pull out the plug and do not pull it from the mains cord.
4. Don’t allow your kids to look inside the washing machine while running.
5. This washing machine is meant for washing clothes with water as a medium. Do not use petrol or other chemicals. This can result in fire and damage.
6. Do not use water with temperature exceeding 50 degree C, as this deforms the plastic parts in the machine. If you desire to use warm water add hot water to cold water in the wash Do not pour hot water in an empty tub.
7. Keep the machine away from flames and inflammable material. Do not expose the washing machine to direct sunlight or rain. Also avoid placing it in humid locations.
8. Take Precautions not to pierce the control panel membrane sheet.
9. Do not connect the earth wire to a phone wire, lightening rod.
10. Do not press the button with an awl or a pin.
11. Avoid overloading of wash and spin tub.
12. Do not use wash & spin tub for water storage.

Care & Maintenance

Be sure to remove the power plug from main power supply before cleaning the machine and filter

Cleaning the Wash Tub

1. After washing is complete, fill fresh water above the level of pulsator without adding clothes.
2. Run the machine for 1-2 minutes turn the knob to “DRAIN” position when pulsator is still rotating.
3. When water is completely drained out, turn the knob to “WASH” position.
4. Finally turn off the machine.

Recommended washing procedure

1. Open the water tap and fill the wash tub about half way.
2. Put in the laundry detergent and allow it to disperse well.
3. Put in the clothes to be washed and add water in accordance with the amount of cloth load.
4. Set the WASH TIMER as desired depending on the fabric type and the degree of soiliage.
5. When washing is finished, set the Drain Selector to Drain.

NOTE: Ensure that the clothes rotate freely during wash, if not, reduce the cloth load. {By removing some clothes from the machine)

Rinsing and Drying Rinsing

There are 2 ways to rinse:

1. Rinse : Fill the wash tub appropriately for the number of clothing being washed. Set wash timer for 15 Minutes. (Rinse will begin) and clothes will Rinse for a period of 15 Minutes.
2. Intermediate Spin Rinse: Put clothes inside the Spin Tub. Set Water Supply selected to SPIN TUB. Open the water tap and keep it open for one to two minutes and then close tap. Spin for one minute. When rinsing is over, set the Drain Selector to DRAIN. Do not keep the water tap open when the Spin tub is rotating, else machine will malfunction.

SPIN DRYING

Put clothes inside Spin Drum, distributing them evenly and ensure that the drain hose is lowered otherwise the machine will malfunction. After putting clothes in Spin Drum place spin Drum Cap over the clothes inside the tub to prevent them from flying out. Close the Spin Drum Lid. If the lid is not closed the Spin Drum will not rotate. Set the SPIN TIMER from 1 to 5 minutes according to the type of clothes. If the spin Drum starts shaking noticeably, open the lid and wait for the Spin Drum to stop spinning. Distribute the clothes evenly and re-start.

REFERENCE

TABLE 1. DETERGENT GUIDE

WASH LOAD

| 1.2-2.5 kg| 2.5-3.8 kg| 3.8-5.0 kg| 5 . 0 kg or ABOVE
---|---|---|---|---

Water Level

| Low| Medium| High| Over Flow

Amount of Detergent

| 40 gm| 50 gm| 60 gm| 64gm

Amount of concentrate Detergent

| 25gm| 30 gm| 38 gm| 40 gm

Amount of Softener

| 22 ml| 26ml| 29ml| 35 ml

Table 2- LAUNDRY GUIDE

Amount of Laundry| Clothes| Synthetic Fiber| Cotton| Heavy Stained Clothes
---|---|---|---|---

1.2- 2.5 kg

| Washing Time| 2-5 minutes| 7-10 minutes| 10-15 Minutes
Wash Selector| GENTLE| GENTLE’ /HEAVY| HEAVY

2.5 – 3.8 kg

| Washing Time| 7-10 minutes| 10-15 minutes| ****

Wash 15 minutes

Wash Selector| GENTLE| GENTLE’ /HEAVY| HEAVY

3.8 kg and above

| Washing Time| Wash 10-15 minutes| Wash 15 minutes| Wash 15 minutes
Wash Selector| GENTLE| GENTLE’ /HEAVY| HEAVY

Notes:

• If the wash load and water volume do not match, clothes may damage/water splash may occur.
• The quantity of wash load varies depending on fabric type, thickness and size of the clothes.
• Adjust the water level/wash load as required by carefully watching the movement of the clothes in the tub.

Troubleshooting guide

• Check supply source.
• Is the power cord firmly plugged in?
• Is the timer turned to a suitable point except “OFF”?
• Motor has been provided with “TOP” (Thermal overload protector). This will protect the motor from burning due to overheating caused by various variable factors such as overload voltage, frequency variation, etc. In such case motor supply will get off , thus stopping the motor. Wait for approximate½ hour till motor cools to normal temperature Restart the M/c to see if motor functions normally.

Spin dryer basket does not operate|

• Is there any cloth dropped between the basket and tub?
• Is the spin dryer cover closed?
• Is the laundry gathered to one side of the spin dryer basket?

Drain not drawing|

• Is the lint stuck to the plunger valve?
• Is the end of the drain hose guide located at an excessive height?

Troubleshoot Table

Problem| Reason| Solution
The pulsator does not rotate| Power out or switch off Transmission belt burst

Pulsator is blocked by something

| Switch on plug Assemble the transmission belt Remove the blockage
The pulsator rotates too slowly| Belt becomes loose The flexible screw of motor is loose| Tighten the belt or replace it Tighten the belt and the screw
Abnormal noise and vibration| The clothes in the spin-dry tub are unbalanced

Something was stuck between pulsator and wash tub

| Place the clothes neatly Remove it.
Water leaks from washtub| The hose is not tightened with the wash tub| Tighten it

Usage instructions for semi-automatic washing machine

Step 1

• Select the wash option (Gentle/ Heavy ) on the selector switch.
• Wash: Put clothes in the wash tub with water and detergent. Start the Wash function.
• Pulsator will rotate and wash the clothes for 15 minutes.

Step 2

• Place the clothes in the spin tub.
• Select spin timer for the time period required ( minutes).
• This is required to remove excess soap.
• Will result in the first drying process for the clothes.

Step 3

• Transfer clothes to the wash tub.
• Rinsing: Fill in water only and select wash time for 3-4 minutes.
• After this is complete, select the drain mode to drain out water.

Step 4

• Drying : Transfer clothes to spin tub and select spin time to complete final drying process.

SPECIFICATION

WIRING DIAGRAM

PACKING LIST

SPECIFICATION

WIRING DIAGRAM

PACKING LIST

CERTIFICATE OF WARRANTY

Warranty

Customer Privileges
Dear Customer,

Congratulations! We wish you a long and happy association with Nu Washing Machine. We would like you to know your privileges with respect to your washing machine.

You are entitled to:

1. 1. a. Repair or replacement of any parts other than rubber and plastic parts free on charge, for a period of 12 months from the date of Invoice/bill.
   b. The defective part(s) shall be replaced with a functionally working equivalent part(s). The removed part(s) will be

2. After sales service is available with in the municipal limits of the city where the service station/authorised dealer is located.

3. These privileges are available to the original purchaser only.

4. In the event the washing machine requires attention at the company’s service centre / authorised dealer under an advance of company’s service engineer, the purchaser should arrange to deliver the washing machine to the service centre at his cost

Nu warrantees your above privileges

Kindly note

1. Your privileges mentioned above, are for the repair and replacement of the defective parts only and does not cover any consequential damages or loss or replacement of the washing machine itself or refund the prices.

WARRANTY CARD

**TERMS OF WARRANTY***

Repair or Replacement of any part other than plastic parts and rubber parts free of charge for a period of 12 months from the date of the Invoice/Bill *5 Years Warranty on wash motor only.

Thank You for using our Washing Machine. Please tell us troubles found during using it send your suggestions for improvement.

Gamma Internet Private Limited
RJP Towers, 27th Main Rd, Sector 2, Parangipalya
HSR Layout, Bengaluru, Karnataka – 560102 (India)
E-mail: contact@nuliving.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>