EKSA Telecom S30 Open Ear Wireless Telecom Earbuds Instructions
- May 16, 2024
- EKSA Telecom
Table of Contents
EKSA Telecom S30 Open Ear Wireless Telecom Earbuds Instructions
IMPORTANT SAFETY INSTRUCTIONS
Please read and keep all safety and use instructions.
‘WARNINGS/CAUTIONS
- Do NOT use the headphones at a high volume for any extended period.
- To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
- Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
- Do NOT use your headphones while driving for phone calls or any other purpose.
- Do NOT use the headphones at any time the inability to hear surrounding sounds may. present a danger to yourse or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. ~ Remove the headphones, to ensure you can hear surrounding sounds, including alarms and warning signals.
- Be aware of how sounds that you rely on as reminders or wamings may vary i character when using the headphones.
- Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact EKSAtelecom customer service.
- Remove headphones immediately if you experience a warming sensation or loss of audio.
- Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, s this could result n injury or property damage due to overheating.
- Do NOT use the headphones as aviation communication headsets except in case of emergency.
- No incoming audio will be heard with a discharged or improperly installed battery This could result in the potential of missed communications while piloting an aircraft.
- Extremely loud ambient noise levels commonto many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb. ot
- The headphones are ot engineered for noise conditions, alitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications.
Contains small parts which may be a choking hazard. Not suitable for children
under age 3.
This product contains magnetic material. Consult your physician on whether
this might affect your implantable medical device.
To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
- Do NOT make unauthorized alterations to this product.
- Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
REGULATORY INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by YI ZHAO (SHENZHEN) CO.,LIMITED. could void the user’s authority to operate this equipment.
RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
“This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not be co-located or operating in conjunction with any other antenna or transmitter. Meets IMDA Requirements.
CAN ICE! (B)/NMB-3(B)
Management Regulation for Low-power Radio-frequency Devices
Article Xl According to “Management Regulation for Low-power Radio-frequency Devices™ without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radiofrequency devices
Article XIV
The low power radio-frequency devices shall not influence aircraft security
and interfere legal communications; f found, the user shall cease operating
immediately urtil no interference is achieved. The said legal communications
means radio communications operated in compliance with the Telecommunications
Act The low power radio-frequency devices must be susceptible with the
interference from legal communications o ISM radio wave radiated devices. DONT
attempt to remove the rechargeable lithium-ion battery from this product.
Contact your local EKSAtelecom retailer or other qualified professional for
removal.
YI ZHAO (SHENZHEN) CO.,LIMITED. hereby declares that this product is in
compliance CE requirements and relevant provisions of and all other applicable
EU directive requirements. The complete declaration of conformity can be found
at: www.eksatelecom.com
For Europe:
Frequency band of operation 2400 to 2483.5 MHz:
Bluetooth: Maximum transmit power less than 20dBm EIRP.
Please dispose of used batteries properly, following local regulations. Do not
incinerate.
REGULATORY INFORMATION
Information on electrical and electronic equipment.
The following notice is aimed at private end users who use electrical and/or
electronic devices. 1. Separate collection of old devices Electrical and
electronic equipment that has become waste is referred to as waste ‘equipment.
Owners of old devices must collect them separately from unsorted municipal
waste. In particular, old devices do not belong in household waste, but in
special collection and retum systems.
- Batteries and rechargeable batteries As 3 rule, owners of old devices must separate old batteries and accumulators that are not enclosed by the old device from it before handing them over to a collection poit. This does not apply if the old devices are handed over to public waste disposal authoriies and are separated there from other old devices in order to prepare them for reuse.
- Options for retuming old devices If you own old devices, you can hand them over to the options set up and available by public waste disposal authoriies for the purpose of proper disposal of old devices. It may also be possible to hand in electrical and electronic equipment there for the purpose of reusing the equipment. You can obtain more detailed information on this from the respective collection or collection point.
- Privacy Notice Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.
- Meaning of the crossed-out dustbin symbol ‘The symbol of a crossed-out garbage can, which is regularly shown on electrical and electronic devices, indicates that the device in question must be collected separately from unsorted municipal waste at the end of its service life.
The crossed-out wheeled bin symbol on batteries or accumulators means that they must ot be disposed of with household waste at the end of their useful e, If batteries or accumulators contain mercury (Hg), cadmium (Ca) or lead (Pb), you will find the respective chemical symbol below the symbol of the crossed- out garbage can. You are legally obliged to return old batteries and accumulators after use. You can do this free of charge at a retail store or at another collection point near you. Addresses of suitable collection points can be obtained from your city or local goverment.
Batteries may contain substances that are harmful to the environment and human health. Particular caution is required due to the special risks involved in handling lithium-containing batteries. The separate collection and recycling of old batteries and accumulators is intended to avoid negative effects on the environment and human health,
Please avoid generating waste from old batteries as much as possible, e.g. by giving preference to batteries with a longer lifespan o rechargeable batteries. Please avoid littering public spaces by not leaving batteries or battery-containing electrical and electronic devices lying around. Please explore ways to recycle a battery instead of disposing of t, such as reconditioning or repairing the battery.
Names and Contents of Toxic or Hazardous Substances or Elements
| Toxic or Hazardous Substances and Elements
Pad Name| Lead (Pb)| Mercury(Hg)| Cadmium(Cd)| Hexavalent(CR(VI))|
Polybrominated Biphenyl (PBB)| Polybrominated phenyl ether (PBDE)
PCBs| | U| U| U| H|
Metal Parts| x| u| U| 0| 0| H
Plastic Parts| 0| 0| U| 0| 0| 0
Speaker| x| 0| U| 0| 0| H
Cables| x| ( 1| U| U| 0| H
This table is prepared in accordance with the provisions of SJ/T 11364.|
0: Indicates that this toxic or hazardous substance contained in all of
the homogeneous materials for this part is below the limit requirement of GB/T
26572.X: Indicates that this toxic or hazardous substance contained in at
least one of the homogeneous materials used for this part is above the limit
requirement of GB/T 26572.
Charging temperature range: 0° C- 45° C
Discharging temperature range: -20° C – 60° C
| EC | REP |
|---|
C&E Connection E-Commerce (DE) GmbH Add.: Zum Linnegraben 20, 65933, Frankfurt
am Main, Germany
Add.: Zum Linnegraben 20, 65933,
Add.: 89 Princess Street, Manchester, Frankfurt am Main, Germany M1 4HT,
UK Tel. +4906927246648
Tel. +441616371080
E-Mal: info@ce-connection.de
E-Mal: info@apex-ce.com
Manufacturer: Yl ZHAD (SHENZHEN) CO, LIMITED Add: 6th Floor, T3 Creative
Building, Shenzhen Colorful Huiwei Cuitural And Creative Expo City, No. 5010
Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen,
| UK | REP |
|---|
APEX CE SPECIALISTS LIMITED Add.: 89 Princess Street, Manchester, M1 4HT, UK
Tel. +441616371080 E-Mail: info@apex-ce.com
Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED Add.: 6th Floor, T3
Creative Building, Shenzhen Colorful Huiwei Cuitural And Creative Expo City,
No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District,
Shenzhen.
Tel : +4906927246648
E-Mail: info@ce-connection.de
UK Declaration of Conformity Hereby, Y1 ZHAO (SHENZHEN) CO,, LIMITED declares that the product type YB0B is in ‘compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipmert Regulations 2012. The full text of the UK declaration of conformity is available at the following intemet address : www.eksatelecom.com info@eksatelecom.net
- Use careful with the earphone maybe possible excessive sound pressure from ‘earphones and headphones can cause hearing loss.
- Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions,
- The device complies with RF specifications when the device used at Omm form your body.
Manufacturer’s Name: Yl ZHAO (SHENZHEN) CO,, LIMITED
Product: Wireless headphone
Model number: S30
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two ‘conditions:{) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
‘could void the user’s authority to operate the equipment. “This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
instalation. This equipment generates Uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause hammful interference to radio communications. However, there is 0
guarantee that interference will not occur in particular installation. I this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the folowing
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consut the dealer or an experienced radio/TV technician for help.
‘The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
www.eksatelecom.com
info@eksatelecom.net