Bywulanda Wireless ANC Active Noise Cancelling Headphones User Manual
- June 14, 2024
- Bywulanda
Table of Contents
**Bywulanda Wireless ANC Active Noise Cancelling Headphones User Manual
**
Packing list
Product overview
Charging
- Fully dry off the USB-C port before charging.
- Use a certified USB-C charging cable and charger to prevent any damage.
- Do not power on your headphone while charging.
| Voice reminder for low power| Low power
---|---|---
| Steady red| Being charged
| Steady off| Fully charged
Powering on/off
Power on: Press and hold power button for 3 seconds you will hear the
voice” Power on”
Power off: Pressand hold power button for 5 seconds you will hear the
voice “Power off”
|
Steady bule（for 0.5 second）
| Power on
---|---|---
| Steady red（for 0.5 second）|
Power off
Bluetooth Pairing
Step1 – After powered on, the LED flashing red/blue to enter the wireless
pairing mode.
Step2 – Select “ ” on your device’s Bluetooth list to connect
| Flashing blue/red| Bluetooth pairing
---|---|---
| Steady blue (for 2 seconds)|
Bluetooth connected
- Each time you power on your headphone, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
Pairing with another device
Your headphone can be connected to two devices at a time.
Step1:
connection device
**Step2：
**Device
Step3：”
Step4：
Device 1 Open device1 Bluetooth settings select BH728A to Connect
- Your headphone can only play music on one mobile device at a time.
To play from another connected device, pause the currently active device first.
Active Noise Cancellation
Click the ANC button to turn on Active Noise Cancellation
Calling mode
- Siri and other voice assistants ———— Triply Click
- Answer/Hang up a call ————- Short press the power button once
- Reject a call ———– Long press the power button 2s
- Recall last number ———– Double Click the power button
Please contact us:Bywulanda@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>