FERIETELF T26 204GHz 6ch Remote Control Drone Camera Instructions

Suitable for children
over 14 years old
2.4GHz 6CH REMOTE CONTROL
QUADCOPTER
INSTRUCTIONS

T6 2.4GHz 6ch Remote Control Quadcopter Drone Camera

SECURITY WARNING:

• This product is a high-speed aircraft. improper use may cause damage to people or property in the vicinity, so the users must be away from people or property during use. In the case of accidental damage, the manufacturer and its distributors and retailers will not be liable for any legal liability.
• To ensure safety of you and your children, please read this manual while playing this Aircraft.
• Do not pick up the aircraft in motion to avoid injuries.
• Keep hands, hair and loose clothes away from rotary propeller.
• To ensure safety of children, adults please accompany children whiling playing this aircraft (Without authorization, free change or modification of this product will damage your rights related to this product.)

Product packaging contents

Part identification

Aircraft

Remote Control

the aircraft. After that, the camera will quit automatically. Press the key for 2 seconds, the camera on the aircraft will shoot a video. Please it again from 2 seconds to quit. (the camera is an optional part).
3| Headless mode/One key return| Click once during the flight of the aircraft to enter the headless mode. Press the button for 2 seconds and the aircraft will automatically return.
4| Control the throttle| Stir the joystick forward or backward to control rise and fall, stir the joystick left or right to control left and right rotation.
5| One key take-off| After starting the aircraft, every time it is clicked, it automatically rises by about 1.5 m.
6| One key landing/ Emergency stop| Click once during the flight of the aircraft and the aircraft will automatically land on the ground.Press the button for 2 seconds and the aircraft will stop in an emergency.
7| Flip| Click once to enter the rolling mode, and the aircraft will automatically exit this mode after rolling.
8| Turn right fine-tuning| Assist in adjusting the aircraft to fly at left directions.
9| Turn left fine-tuning| Assist in adjusting the aircraft to fly at right directions.
10| Control the direction| Stir the joystick forward or backward to control the aircraft to move forward or backward, stir the joystick left or right to control the aircraft to fly at left or right directions.
11| Forward fine-tuning| Assist in adjusting the aircraft to move forward .
12| Backward fine-tuning| Assist in adjusting the aircraft to move backward .
13| Power switch| Control power switch, turn right to plug in, turn left to disconnect power.

Battery installation and charging

1. Remove the battery cover.
2. Install 3 “AA” batteries, according to the correct polarity.
3. Close the battery cover.

Battery installation of aircraft

1. Push the battery in the direction indicated to the clasp position.
2. Press the buckle lightly with both hands and push out in the indicated direction.
3. Remove the battery.

Lithium battery charging
Remove the battery from the aircraft, and then plug the USB cable into the USB port of the computer or other USB charger. The indicator light will be off.Connect the plug of the battery with the socket on the USB charging cable. The indicator light is on,  indicating that it is charging; the indicator light is off, indicating that it is fully charged.

Note: The USB charging line can be connected to most smartphone chargers or mobile power sources or USB interface in automobiles. The voltage in USB interface is 5V±0.5V. (The current cannot be> 1A)

Mobile phone fixture installation

Install the blade / Protective cover

The blade of the aircraft is not the same for every piece. Each blade is marked with “A” or “B”. When install the blade, please correctly install according to the corresponding tag as shown below. When the blade is not properly installed, the aircraft will be unable to take off,or rollover or throw.

1. Install the blade as shown in the figure, pull out the nut first, and then lock it with a screw.
2. Install the protective cover as shown in the illustration. First remove the protective cover and then install the protective cover.

Aircraft calibration

After matching the code between the aircraft and remote control, put the aircraft on a horizontal plane,and push the “left joystick” and “right joystick” on the remote control until the navigation light flashes, as shown below. After the calibration is completed, the navigation light will return to normal. (When the aircraft is offset in any direction and fine-tuning cannot be adjusted, this calibration can be used for repair.)

Automatic setting height

■ This aircraft adopts “barometer” module to achieve fixed height and hovering; use the left joystick (accelerator) to control rise/fall; loosen the left joystick (accelerator), the aircraft will hover at that height.

Take-off

1. Put a fully charged battery into the aircraft and press and hold the aircraft power switch for about 2 seconds to start the aircraft. Then place the aircraft on level ground with the nose on the front. (At this time, the aircraft light will flash.)
2. Turn off switch of the remote control (the power indicator is on) push left lever to top and then to end, Aircraft and remote control begin to match codes, after that, power indicator of remote control and light of PRV will be always on.

Start /Close the aircraft (choose the “set height” function) To Start the Drone:
Move the left lever (throttle lever) to the top, the aircraft blades will slowly rotate.

To close the Drone:

1. Dial the left joystick (throttle) to the bottom until the aircraft blades stop rotating.
2. After the aircraft lands on the ground, press the One-touch landing/Emergency Stop button ( ) for 2 seconds to turn off the aircraft. ( Emergency stop function cannot be used unless the aircraft needs to be urgently stopped when it is on the ground or in special circumstances.)

One key take-off (optional) / One key landing (optional)

One key take-off
■  After starting the aircraft, click “one key take-off’ ( ) button, the aircraft will rise to about 1.5m automatically. [No use of left joystick (accelerator)] One key landing
■  Click “one key landing” ( ) button, the aircraft will land on the ground slowly from any heights. [No use of left joystick (accelerator)]

Aircraft operation and control

Caution: To avoid losing control, move the joystick slowly while operating the aircraft.
If aircraft deviates the direction (left/right turning, forward/backward, left/right side flight), push fine-tuning
key in an opposite direction.For example, as shown in the figure, push back when deviating forward.

Fine tuning
If Aircraft deviates the direction (left/right turning, forward/backward, left/right side flight) , push finetuning key in an opposite direction. For example, as shown in the figure, push back when deviating forward.

Sensitivity setting

This Aircraft can realize 3 modes: Low-Medium-High Speed Press”Accelerate(H)”button to rise up the throttle,Press “Lower speed(L)to low down the speed(Default Low speed mode when it just started)

1. After press the button of the remote control ,The buzzer Sounds a ‘wow’ means low speed.
2. After press the button of the remote control ,The buzzer Sounds 2 ‘wow’ means Medium speed.
3. After press the button of the remote control ,The buzzer Sounds 3’wow’ means High speed.

Adjust sensitivity of Aircraft by this key,if the sensitivity is higher, Aircraft responds more quickly,otherwise, more slowly.

Flip mode

This Aircraft can roll 360 degrees by the following operations. To better perform rolling function and ensure the Aircraft is 4 meters away from the ground, it is necessary to roll in the rising process.
Thus, the height is more easily maintained after rolling.

Flip Click “flip” ( ) key, push left the right lever, and then push the lever into center. Click “flip” ( ) key, push right the right lever, and then push the lever into center.
Front flip

Click “flip” ( ) key, push front the right lever, and then push the lever into center.

Back flip Click “flip” ( ) key, push back the right lever, and then push the lever into center.

Camera Use (Optional)

1. Connect to power supply and then start the remote control with further coding.

2. Click the “camera/video” ( )button, the camera on the aircraft will take a picture. The camera mode will be automatically exited after shooting.

3. Press and hold the “Camera/Video” ( )button for 2 seconds, the camera on the aircraft will take a video, and then press and hold the “Camera/Video” ( ) button for 2 seconds to exit the recording mode. (Camera is an optional accessory)

4. Exit the camera mode, turn off the power, and finally remove the SD card.

5. Ensure operation according to above steps.

6. When taking pictures, the time interval shall not be less han 2 seconds .

7. If SD card cannot store data, please format it before use.

Headless mode

• What is “headless mode’?
  Namely, during flying, no matter where the PRV is, and no matter what its direction is, as long as the operator press “headless mode/One key return” ( ) key, PRV will automatically lock the flying direction.

• When will the operator use the “headless mode’?

• When the Aircraft is far from you and you cannot know its direction, you can press “headless mode/One key return” ( ) key to control the return of Aircraft.

• Use of “headless mode”

1. When matching code, the head of Aircraft shall be in front (otherwise, the direction will be mixed when opening the “headless” mode).
2. To better use “headless” mode, before flying, it is necessary to establish a direction coordinate on the ground.
3. When you need to use compass mode, press “headless mode/One key return” ( ) key, and the Aircraft will automati cally lock flying direction.
4. When you do not need to use “flip/compass” mode, press “fheadless mode/ One key return”( ) key to exit.

One key return mode

• When the Aircraft is far from you and you do not know its direction, you can click “headless mode/one key return” ( ) mode and control its height by the left lever (right lever is not used).
• When Aircraft is automatically returned to the visible range, push the lever in any direction or re-click “headless mode/one key return” ( ) key to exit.

Fault removal

1. Remote control and Aircraft cannot match codes.
   Solutions: Check whether the throttle of remote control is lowest; when starting code match, do not push other levers or click fine-tuning key.

2. Propeller does not rotate or responds slowly.
   Solutions:
   (1) Lithium battery power is low.
   (2) You need to re-match codes.
   (3) push throttle to bottom to make Aircraft land, and fly again after 3 seconds.

3. Aircraft shakes or vibrates during flying, noise is loud.
   Solutions: Check whether motor, housing or blade is installed correctly or whether the cone is damaged.

4. The blade can rotate but Aircraft cannot fly.
   Solutions: Check whether A/B blades are installed correctly.

5. One or more motors cannot work.
   Solutions: (1) The motor is broken. Change it. (2) A transistor on the launch panel of remote control is burned out. Replace it with a new remote control.

6. Four axles still drift during suspension after recalibration.
   Solutions: Put Aircraft on a flat ground and put several layers of paper on its directing direction (the thickness of the paper depends on the degree of drift). Thus, you can calibrate the accelerometer and solve drifting problem.

7. Can not roll
   Solutions: Low battery needs charging.

List of accessories

MADE IN CHINA

Documents / Resources

| FERIETELF T26 204GHz 6ch Remote Control Drone Camera [pdf] Instructions
T26, T26 204GHz 6ch Remote Control Drone Camera, 204GHz 6ch Remote Control Drone Camera, 6ch Remote Control Drone Camera, Remote Control Drone Camera, Control Drone Camera, Drone Camera, Camera
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>