ZALMAN Z9 NEO ATX Mid-Tower Computer Case User Manual

June 4, 2024
ZALMAN

ZALMAN Z9 NEO ATX Mid-Tower Computer Case

ZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-product

Cautionary Note

  1. Please read this manual thoroughly prior to installation.
  2. Before installing, check the components and condition of the product, and if any problem is found, contact the retailer.
  3. Please wear gloves while handling this product to prevent injuries.
  4. Incorrect cable connections may cause short circuits leading to fire hazards.
  5. Do not block the front intake vent or the rear exhaust vent.
  6. Keep this unit away from heat sources, direct sunlight, water, oil and place the unit on a flat and well-ventilated area.
  7. Do not clean the product surface with chemicals or wet cloth. (chemicals: industrial alcohol, pait thinner and organic solvent etc.)
  8. Avoid inserting objects or hands into the system while it is in operation to prevent product damage and injuries.
  9. Zalman Tech Co., Ltd. is not responsible for any improper use.
  10. Product design and specifications may be revised to improve quality and performance.

Components

ZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-
fig-1

Top I/O Ports

ZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-
fig-2

# Part # Part
Power Button Reset Button
Headphones Mic
USB 2.0 USB 3.0

Installation

  1. Side Panel Removal

  2. Motherboard InstallationZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-fig-4
    There are 6 Stand-offs preinstalled. Please refer to the diagrams below for additional Stand-Off positions (based on motherboard type).

  3. VGA Card InstallationZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-fig-5
    Unfasten the Hand Screw holding the PCI Cover and disassemble the cover. Remove the PCI Slot Cover. Install the VGA Card and fasten it with a fixing screw.

  4. 5.25” Drive Installation

  • Front Cover Removal
  • ODD InstallationZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-fig-7
  1. 3.5”, 2.5” HDD Installation
  • Install the Drive on the HDD tray
  • then remove the HDD Tray as shown in the figure.
  • Install the Drive on the HDD tray
  • Install the tray on the drive.
  • When transporting an assembled system, Please secure the HDD white Bolt as shown above
  1. Cable Connection
  2. 2.5 “HDD, SSD Installation
    2.5″ HDD and SSDs can be installed on the side of the case as shown in the diagram below.
  • The images can differ from the actualZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-fig-13

How to Install the Cooler

  • As shown in the picture, install the cooler on the top of the case using boltsZALMAN-Z9-NEO-ATX-Mid-Tower-Computer Case-fig-14

Warranty Information

Zalman Tech products come with the following limited warranties:

  • 1 Year Warranty
    CPU coolers (All CNPS series, Reserator 3 Max series, LQ3xx series), computer cases, keyboards, mice, laptop coolers, case fans, hardware enclosures (including the VE series), audio devices, and all other accessories not specified below.

  • 3-Year Warranty
    HQ series AIO CPU coolers

  • 7-Year Warranty
    EBT series Power Supply Units
    Zalman USA has the right to change the availability of a limited warranty at its own discretion and any changes will not be retroactive.

The limited warranty does not cover…

  1.  Non-Zalman brand products and accessories.
  2. Problems resulted from external causes such as accidents, abuse, misuse, and/or problems with electrical power.
  3. Any service not authorized by Zalman USA.
  4. Usage that is not in accordance with product instructions.
  5. Failure to follow the product instructions and/or failure to perform preventive maintenance.
  6. Problems caused by using accessories, parts, and/or components not supplied by Zalman.
  7. Products with missing, altered Service Tags and/or serial numbers.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals