KINSOUND M.2 SSD Enclosure 2.5 Inch SATA III to USB 3.0 External Hard Drive HDD User Manual

KINSOUND M.2 SSD Enclosure 2.5 Inch SATA III to USB 3.0 External Hard Drive HDD

Product Overview

1. Aluminum shell
2. USB-C interface
3. Working Status Indicator
4. M.2 interface
5. Fixing Hole
6. Drive Fixing Hole

Installation

1. Move the button and push up the bottom cover at the same time.
   

2. Based on SSD size, select the corresponding fixing hole for installing the fixing screw and rotate it as in the picture.
   

3. Slowly insert the M.2 SSD into the M.2 slot.
   

4. Hold the SSD drive and rotate the screw as in the picture.
   

5. Take out the pad, peel off its back film and stick it along the SSD.
   

6. Peel off back film of the other side.
   

7. Attach the slide case.

8. Connect the product to the host like PC. The blinking white dicator means normal working.
   

Support SATA/NVMe

Notes

• Activate the “Safe Remove” from the computer setting before removing disks.
• Do not extract the disk while copying data. The improper operation may damage the disk, resulting in data loss.
• Do not operate hot swapping frequently in case of damage.
• Remember to backup any important data before using the product. We will not accept any claim for data loss or data recovery.
• The operating voltage of the connected port should be within the range of SV±5%.
• Do not drop, crush, shock or throw the product.
• In order to avoid short-circuit fault in interior, please do not operate in a humid environment.

Customer Support

SHENZHEN KINSOUND TECHNOLOGY CO., LTD
9038,South Tower, Jingji Times Center, Huangge Road, Longgang District, Shenzhen
kinsoundtech@gmail.com www.kinsound.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>