cecotec AGUAZERO Coolmarket 1D 242 Refrigerator Instruction Manual

AGUAZERO COOLMARKET
1D 242 WHITE Refrigerator
Instruction Manual

PARTS AND COMPONENTS

Fig. 1

1. Control panel and LED light
2. Refrigerator shelves
3. Crisper drawer cover
4. Crisper drawer
5. Adjustable lower feet
6. Handle
7. Door top shelves
8. Door lower shelf
9. Door

Note
The graphics in this manual are schematic representations and may not exactly match the product.
To make the most out of the refrigerator in terms of energy, place all the shelves and drawers in their original position, that is, as shown in figure 1.

BEFORE USE

This product includes a packaging designed to protect it during transport. Take the refrigerator out of the box. You can keep the original box and other elements in a safe place, this will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any piece missing or not in good condition, immediately contact the Technical Support Service of Cecotec.
Box contents:
Bolero CoolMarket 1D 242 White refrigerator Instruction manual

INSTALLATION

Warning:
For proper installation, the refrigerator must be placed on a levelled surface of hard material that is at the same height as the rest of the floor. This surface must be strong enough to withstand a completely loaded refrigerator.
Refrigerator ventilation. Fig. 2
To improve the refrigerator system efficiency and to save energy, it is necessary to ensure a proper ventilation around the refrigerator to dissipate the heat. For this reason, you should leave enough free space around the refrigerator.
It is advisable to leave at least 50-70 mm of free space from the rear part of the refrigerator to the wall, at least 100 mm space from the surface to the ceiling, at least 100 mm from the side to the wall and a free space in the front part to be able to open the door at 135º. Check figure 2 for reference.
Refrigerator stabilisation
For sufficient stabilisation and air circulation at the lower rear part of the refrigerator, it may be necessary to adjust the lower feet. You can adjust them manually or using a suitable wrench. To allow the doors to close automatically, tilt the upper part back by about 10 mm as shown in figure 3.
Changing the opening direction of the door
If desired, you can change the direction in which the door opens, from the right side (by default) to the left side.
Warning
The refrigerator must not be connected to the power socket when you change the opening direction of the door. Make sure to disconnect the plug from the power socket.
Check figure 4 to check the tools you need.
It is advisable to change the opening direction of the door between two people.
Fig. 4
A. Tools not supplied

1. 8-mm tube wrench

2. Flat-head screwdriver

3. Spatula

4. Crosshead screwdriver

5. Wrench

6. 8-mm wrench
   B. Additional parts (included in the plastic bag)

7. Upper left hinge cover

To reverse the door opening direction, follow these steps:

1. Open the door, remove every door shelf (to prevent any damage) and then close the door. To remove the shelves, slightly press the shelf and move it upwards. Fig. 5

2. Use a spatula (3) or a flat-head screwdriver (2) to lift the screw gap cover (8) on the upper left corner of the refrigerator and the cover of the upper right hinge (9). Fig. 6
   Fig. 6 key
   8. Screw gap cover
   9. Upper right hinge cover

3. Loosen the plate self-tapping screws (11) used to fix the upper hinge (10) with a screwdriver or an 8-mm wrench (6) (hold the door while you do this step). Fig. 7
   Fig. 7 key
   10. Upper hinge
   11. Plate self-tapping screws

4. Remove the upper hinge shaft (12), move it to the left side and tighten it firmly, as shown in figure 8. Next, keep the upper hinge in a safe place for later use. Fig. 8
   Fig. 8 key
   12. Upper hinge shaft

5. Remove the door from the lower hinge in the direction shown in the figure.
   Note
   When removing the door, be careful with the lower hinge, as it may get stuck on the door. Do not lose it. Fig. 9

6. Place the door on a soft surface with the interior facing down. Loosen the screw (14) and the stop (13) on the lower right corner of the door, and insert them on the left side. Fig. 10
   Fig. 10 key
   13. Stop
   14. Self-tapping screw

7. Place the refrigerator on soft foam packing material or a similar material. Remove the adjustable lower feet parts (16) and the lower right hinge (15) by loosening the plate selftapping screws (17). Fig. 11
   Fig. 11 key
   15. Lower hinge
   16. Adjustable lower feet part
   17. Plate self-tapping screws

8. Place the lower hinge again (15) on the left side and fix it with the plate self-tapping screws (17). Place the adjustable lower feet parts again (16) on the other side and fix them. Fig. 12

9. Place the door on the left side, adjust the lower hinge (15), insert the hinge shaft on the lower gap of the door. Fig. 13

10. Place the upper hinge (10) and insert the upper hinge shaft (12) on the upper gap of the door, and adjust the door position (hold the door during this step) by fixing the upper hinge (10) with the plate self-tapping screws (11). Fig. 14
    Fig. 14 key
    10. Upper hinge
    11. Plate self-tapping screws

11. Install the screw gap cover (8) on the upper right corner of the refrigerator. Install the upper left hinge cover (7) (included in the plastic bag) on the left corner. Place the upper right hinge cover (9) in the plastic bag. Fig. 15
    Fig. 15 key
    7. Upper left hinge cover
    8. Screw gap cover

12. Change the handle on the left side of the door to the right side as shown in figure 16.

13. Open the door and assemble the shelves.

OPERATION

Start-up and temperature control
After installing the refrigerator, wait for at least 5 minutes and plug it to a power socket. Do not store anything on it until the interior temperature is low enough to do so.
When you open the door, the interior light will turn on.
Control panel. Fig. 17
Level 0: refrigerator off. Turn the knob clockwise to turn the refrigerator on.
Level 1: highest temperature setting.
Level 7: lowest temperature setting.
It is advisable to use the medium temperature settings, that is, levels 2, 3 or 4. However, you must always set the temperature level according to your needs, knowing that the lowest temperature helps preserve food and the highest temperature leads to food waste.

dairy products, cakes, drinks and other food which are not suitable for freezing.
Crisper drawer| 0-4| Fresh pork, beef, fish and chicken, cooked food, etc.

Door shelves
They are ideal to store eggs, canned liquids, bottles, packed food, etc. Do not place too many heavy items on these shelves.
All the door shelves are removable for cleaning.
To remove the door shelf, press the right side of the door shelf inwards while you hold the left side. When you release the door from the shelf slot, remove the shelf upwards at an angle. Fig. 18
To install the door shelf, tilt the left side of the door shelf and make sure the slot fits on the door. Next, press the right side upwards and press it downwards on the correct place. Fig. 19
Shelves
The shelves on the refrigerator compartment can be removed to clean them. Fig. 20
Food storage by category: place daily food items at the front of the shelf so that you can reduce the door opening time and avoid food waste due to expiration date.
Crisper drawer
This drawer is suitable to store fruits and vegetables.
Please note that some types of fresh fruit and vegetables are sensitive to cold.

SUGGESTIONS AND USEFUL TIPS

Noises during operation
The following sounds are common in refrigerators:
Clicks: the compressor is switched on or off.
Buzzing sound: the compressor starts running.
Bubbling: you will hear bubbling or splashing sounds when the refrigerant flows.
Splashing: even after the compressor has been switched off, noises can be heard for a short period of time.
Tips on energy saving
Try to avoid keeping the door open for a long period of time to save energy.
Keep the refrigerator away from heat sources (direct sunlight, electric ovens or cookers, etc.).
Do not set the temperature colder than necessary.
Place the refrigerator in a well ventilated room and free from moisture.
If the refrigerator has the correct combination of drawers and shelves, do not modify it, as it has been designed to offer the most efficient energy setting.
Tips for cooling fresh food
Do not place hot food directly in the refrigerator, as the interior temperature will increase, so the compressor will operate at a higher level and will spend more energy.
Cover or wrap food, especially if it has a strong smell.
Place food correctly so air can flow freely around it.
Refrigeration tips
Cooked food, cool dishes, etc. must always be covered and can be placed on any shelf.
Fruits and vegetables must be stored in the crisper drawer.
Butter and cheese must be wrapped.
Milk bottles must have a cap and must be preserved in the door shelves.

CLEANING AND MAINTENANCE

For hygienic reasons, the refrigerator should be cleaned regularly at least every two months.
Warning
The refrigerator cannot be connected to the power socket during cleaning, as there is a risk of electric shock. Before cleaning it, turn off the refrigerator and unplug it from the mains.
Exterior cleaning
To keep your refrigerator in good condition, you should clean it regularly.
Clean the control panel with a soft and clean cloth.
Spray water on a cleaning cloth instead of spraying it directly on the refrigerator surface. This will help distribute moisture evenly over the surface.
Clean the doors and surfaces of the refrigerator with a soft detergent and then dry them with a soft cloth.
Dust accumulation on the condenser increases energy consumption, clean the condenser at the rear of the refrigerator with a soft brush or vacuum cleaner.
Check the water drainage gap on the rear part of the refrigerator. Clean it if it is blocked with a soft cloth.
Warning
Do not use sharp objects, as they could scratch the surface.
Do not use thinner, car detergent, chlorine-containing detergents, ethereal oil, abrasive cleaners or organic solvents such as benzene for cleaning. They could damage the  surface of the refrigerator and cause a fire.
Interior cleaning
You must clean the interior of the refrigerator periodically.
Clean the interior of the refrigerator with a weak solution of baking soda and then rinse it with warm water using a wrung-out cloth or sponge. Dry it completely before placing the shelves and the crisper drawer back. Dry all the surfaces and the detachable parts thoroughly before placing them back in place.
Defrost
Water on food or water that gets into the air inside the refrigerator when opening and closing the doors can form layers of frost inside the refrigerator. When frost is thick, it will reduce the cooling power. When it is thicker than 10 mm, it must be defrosted in the refrigerator. Control defrosting by turning the temperature selector on or off so that defrosting is not necessary. The defrost water will automatically drain into a drip tray through a drain pipe at the rear of the refrigerator.
Substitution of the LED light
Warning
The LED light can only be substituted by authorised personnel. If the LED light is damaged, contact the official Customer Service of Cecotec for assistance.
Turning off the refrigerator
If it were necessary to turn off the refrigerator for a long period of time, you should follow
these steps to prevent fungus or mould formation in the refrigerator.

1. Remove all the food.
2. Turn off the refrigerator by placing the knob on the 0 position and disconnect the plug from the power socket.
3. Clean and dry the interior completely.
4. Make sure all doors are slightly open to allow air flow.

TROUBLESHOOTING

If you experience any problem with the refrigerator or you think it does not work properly, you can carry out a few simple checks before calling the official Cecotec Customer Service.
Warning
Do not try to repair the refrigerator on your own. If the problem persists after the checks explained below, contact a qualified electrician, authorised personnel or the store where you purchased the product.

refrigerator.
The device is not correctly connected to the power socket.| Plug the device to the power socket.
The fuse has blown or is faulty.| Check the fuse and contact an electrician if necessary.
The power socket is faulty.| Faulty parts must be repaired by an electrician.
The refrigerator cools too much.| The temperature setting is too Low.| Adjust the temperature to a higher level.
Food is too hot.| The temperature is not correctly adjusted.| Check section 5 ( Operation)
The door was open for a long period of time.| Open the door only during the necessary time.
You have stored a great amount of food in the refrigerator in less than 24 hours.| Adjust the temperature to a colder Level.
The refrigerator is close to a heat source.| Check section 3 ( Installation)
The interior Light does not work.| The Light bulb is faulty.| The light bulb can only be replaced by authorised personnel.
Contact the officialTechnical. Support Service of Cecotec.
There is too much frost, maybe also on the draught excluder.| The door gasket/draught excluder is not airtight (maybe after changing the door opening direction).| Carefully heat the leaking sections of the door gasket with a hair dryer.
WARNING: Be careful not to burn yourself with the hair dryer. Simultaneously, shape the heated door gasket with your hand so that it fits properly.
Abnormal noises| The refrigerator is not levelled.| Adjust the feet again.
The refrigerator is touching the wall or other objects.| Check section 3 ( Installation)
A component of the refrigerator touches another part of the refrigerator or the wall.| Carefully move the component if necessary.
The compressor does not start automatically after changing the temperature setting.| This is normal, there is no error.| The compressor will turn on after a while.
There is water on the floor or on a shelf| The water drainage gap is blocked.| Check section 7 ( Cleaning and maintenance)

TECHNICAL SPECIFICATIONS

You can access the product database where the information for this model is stored by scanning the QR code (and the energy label as well).

This product features a light source with an energy efficiency grade G.
(*) Refrigerating appliance intended for use at room temperatures between 16°C and 38°C.
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL APPLIANCES

**** This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help to protect the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec official Technical Support Service at +34 963 210 728.

OPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

www.cecotec.es
Cecotec Innovaciones S. L.
C/de la Pinadeta s/n, 46930
Quart de Poblet, Valencia, Spain
EA01220411

Documents / Resources

| cecotec AGUAZERO Coolmarket 1D 242 Refrigerator [pdf] Instruction Manual
AGUAZERO Coolmarket 1D 242 Refrigerator, AGUAZERO, AGUAZERO Refrigerator, Coolmarket 1D 242 Refrigerator, Coolmarket Refrigerator, 1D 242 Refrigerator, Refrigerator
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>