KINSOUND S1 3 In 1 Foldable Magnetic Wireless Charger Instruction Manual

KINSOUND S1 3 In 1 Foldable Magnetic Wireless Charger

Product Information

3-in-1 Magnetic Wireless Charger

This 3-in-1 Magnetic Wireless Charger is designed to provide convenient charging for your devices. It features a magnetic design that allows for easy alignment and secure attachment of your devices for efficient charging. The charger is equipped with wireless charging technology, enabling you to charge compatible devices without the need for any cables or connectors.

Product Usage Instructions

Before using the 3-in-1 Magnetic Wireless Charger, please read and follow these instructions:

• Ensure that the charger is connected to a power source using the provided power adapter.
• Place the charger on a stable surface, away from any liquids or flammable materials.
• Make sure that the charger is positioned in a well-ventilated area to prevent overheating.
• Attach the compatible devices to the charger by aligning the magnets on the charger and the devices.
• Ensure that the devices are securely attached to the charger to establish a proper charging connection.
• Verify that the devices are properly aligned with the charging coils on the charger to ensure optimal charging efficiency.
• Once the devices are attached, the charging process will begin automatically.
• Monitor the charging progress on your devices’ screens or LED indicators, if available.
• To disconnect the devices from the charger, simply detach them by gently pulling them away from the charger’s surface.
• When not in use, unplug the charger from the power source to conserve energy and prevent any potential hazards.

Please note that this device complies with part 15 of the FCC Rules and must be operated in accordance with the following guidelines:

• This device should not cause harmful interference to other devices.
• This device must accept any interference received, including interference that may cause undesired operation.
• Any changes or modifications to the device not expressly approved by the responsible party may void the user’s authority to operate the equipment.
• If experiencing interference, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to a different power outlet.
• If further assistance is required, consult the dealer or an experienced radio/TV technician.
• The device complies with FCC radiation exposure limits. Maintain a distance of 15 cm surrounding the device and 20 cm above its top surface during operation.
• Please read the instructions carefully before using this product.

Wireless charger for mobile devices

• Material: Plastic / silicone
• Input: 9Vdc/2A, 12Vdc/2A
• Cellphone output: 5W/7.5W/10W/15W
• Smartwatch output: 2.5W
• Headphone/cellphone output: 3W/5W
• Charging technology: Qi
• Product measurements: 257×72×12.3mm

Smartphone/headphones (3W/5W)

Compatible with devices with wireless charging capabilities.

Instruction for use

1. Connect the device to a power source via the charging cable.
2. Once the red led lights turn on, the device is ready to use.
   • Lay the charger flat and place the cell phone/wat
3. ch/headphone on the corresponding charging area to start charging. The blue light indicates charging in progress.
4. After fully charged, just remove the devices. During the charging process, if you need to finish, please remove it directly 3 kinds of use

Warnings:

• Keep the device away from water.
• Do not put metal debris or magnetic items on it because it may damage it.
• It is not recommended to charge the watch at 30° tilt, preferably charge it at 90° tilt
• Do not expose the device to extreme temperatures.
• It is recommended to use only the cable that comes with the device.

Indicator light function

• Red light: Device on
• Blue light: Charging device

Includes:

• 3 in 1 charger
• 1m cable, type C
• This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities are different or reduced, lack of experience or knowledge unless such persons receive supervision or training in the operation of the appliance. Children must be supervised to ensure that they do not use the appliance as a toy.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>