WinPower Ba20d LED Headlight Motorcycle Bulb User Guide
- June 14, 2024
- WinPower
Table of Contents
WinPower Ba20d LED Headlight Motorcycle Bulb
Installation Instruction
How To Install The S2/Ba20d LED Headlight Bulb?
- Turn off the ignition and light switch, remove the protection cover, twisted to to take out the original lamp.
- Install into the original bulb holder, rotate in the opposite direction and insert this product.
- Confirm the bulb is installed firmly, put on the protective cover and plug the power socket back in place.
Safety Reminder
- Do not replace bulbs before they’ve cooled, to avoid its high working temperature to hurt your hand.
- Do not open this product near flammable objects such as gasoline, flammable sprays and thinners.
Common troubleshooting methods
- If the bulb does not light up after installation: please make sure your vehicle is DC12V, then check whether the power is normally turned on and whether the installation is correct.
- This product is designed in accordance with the 1:1 ratio of the halogen lamp base, no additional base is required, if it cannot be installed, please check whether your purchased model is correct.
- If you have any questions about the product or if anything happens after installation, you can directly contact WinPower customer service through your Amazon Order, and our technical team will provide you with a perfect solution in the first time!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>