medisana HP650 XL Electric Heating Pad Instruction Manual
- June 1, 2024
- medisana
Table of Contents
****medisana HP650 XL Electric Heating Pad
Specifications
- Name and model: medisana Heating pad XL HP 650
- Power supply: 220-240V~, 50/60 Hz 100 watts
- Heat output: after approx. 90 minutes
- Dimensions approx.: 45 x 35 cm
- Weight approx.: 0.5 kg
Product Usage Instructions
- Device and Controls:
- The heat pad XL HP 650 comes with a power LED and a slider control for adjusting the heat settings.
- Safety Instructions:
- Ensure the connection cable is properly connected before plugging the unit into the main outlet. Do not use the heat pad when folded, punctured, or on children under 3 years old. Avoid ironing or dry cleaning the heated cushion to prevent damage.
- Operating Instructions:
- Plug the unit into the mains outlet and move the slider control from position 0 to 1. The power LED will light up green indicating power. Adjust the heat setting as needed but be cautious of skin burns at high settings. To switch off, move the slider back to position 0.
- Maintenance and Cleaning:
- To ensure continuous use, move the switch to position 1 and it will switch off automatically after 90 minutes. Unplug the unit once finished using it. Follow maintenance guidelines to avoid hazards and contact authorized personnel for repairs under warranty.
- Warranty and Repair Terms:
- The warranty period is one year from the date of purchase. For warranty claims, provide proof of purchase. Check the device for completeness and damages before use. Contact the dealer or service centre in case of any doubts or issues.
Device and controls
- Power LED
- Slider control
Explanation of symbols
IMPORTANT INSTRUCTIONS. RETAIN FOR FUTURE USE.
Power supply
-
Before connecting the device to your power supply, please ensure that the supply voltage stated on the rating plate is compatible with your main supply.
-
The control switch should not be covered or placed on or below the pad while the unit is in operation.
-
Keep the mains lead away from hot surfaces.
-
Never carry, pull or turn the heat pad by the mains lead and do not let the lead get tangled.
-
Never touch a device that has fallen into the water. Unplug the unit from the main outlet immediately.
-
The controls and leads must not be exposed to any kind of moisture.
-
The heat pad may only be operated with the control unit (HP650) supplied.
For special people
-
Do not use the heat pad on children or persons who are disabled, asleep or insensitive to heat (persons who cannot reactton overheating).
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerningthe use of the appliance in a safe way and understand the hazards involved.
-
Children shall not play with the appliance.
-
Children below the age of 3 years are not allowed to use this device, because they are not able to react to overheating.
-
The heat pad must not be used by young children over the age of 3 years unless the control unit has been adjusted accordingly by its parents or legal guardians and unless the child has been well instructed on how to use the control unit properly.
-
Should you have any concerns about health issues, consult your doctor before using the heat pad.
-
Do not use the heat pad on parts of the body that are swollen, injured or inflamed.
-
Should you experience persistent pains in the muscles and joints, please inform your doctor. Persistent pains can be a symptom of serious illness.
-
If you wear a pacemaker, please be aware that the electromagnetic fields emanating from this electric product may, under certain circumstances, interfere with the functions of your pacemaker. Therefore, ask your doctor and the manufacturer of the pacemaker for advice before using this product.
-
If you experience any pain or discomfort while using the unit, stop using it immediately.
-
The appliance can be used by children older than 3 years and younger than 8 years under supervision and with the control always set to a minimum temperature value.
-
The cable and control unit of the appliance can give rise to risks of entanglement, strangulation, tripping or treading if not correctly arranged. The user shall make sure that excess ties and electric cords shall be arranged safely.
Operating the device
- Only use the device for its intended use as in the instruction manual.
- If misused, all guarantee rights shall become null and void.
- Carefully check the heat pad before each use, if you notice wear or damage.
- Do not use if you notice wear, damage or signs of improper use on the heat pad, the switch or the cables or if the device is not working.
- Do not fold or crease the heat pad during use.
- Neither pierce the pad with nor attach safety pins or other spiky or sharp objects to the pad.
- Never use the pad unsupervised.
- The device is only for private use and is not to be used in hospitals.
- Do not fall asleep while the heat pad is switched on. Prolonged use of the heated cushion at a high setting could lead to skin burns.
- Do not cover the pad with any other cushions.
- Do not use the heat pad when wet and only use it in dry environments (not in the bathroom or similar environments).
Maintenance and cleaning
- You are only permitted to clean the unit. To avoid hazards, never repair the device yourself. Contact the customer service.
- Cleaning and user maintenance shall not be done by children without supervision.
- If the power supply cable is damaged, it may only be replaced by Medisana, an authorised dealer or by qualified personnel to avoid hazards.
- A damaged power supply cable must be replaced with a power cable of the same type.
- If a fault occurs, do not attempt to repair the unit yourself. Repairs must only be carried out by an authorized specialist dealer or other suitably qualified personnel.
- When storing the heat pad, allow it to cool down before laying out flat in a clean and dry place.
- Do not store the device with any objects covering or resting on top of it to avoid sharp crinkles.
Scope of supply
Please check first of all that the device is complete and is not damaged in
any way. In case of doubt, do not use it and contact your dealer or your
service centre.
The following parts are included:
- 1 Medisana heating pad XL HP 650 with removable switching unit
- 1 Instruction manual
If you notice any transport damage during unpacking, please contact your dealer without delay.
WARNING
Please ensure that the polythene packing is kept away from the reach of
children!
Risk of suffocation!
Operating
- Make sure, the connection cable of the control unit is properly connected to the plug of the heat pad. Plug the unit into the mains outlet and move the slider control 2 from position 0 to position 1. The power LED 1 will light up in green.
- After a few minutes, you will be able to feel the pad getting noticeably warmer. If you require a higher temperature setting, move the switch to the next position 2 or 3 or the maximum heat setting, position 4. If the heat pad gets too hot for you, move the slider
- back to position 3, 2 or 1. After a short time, the heat pad will cool down.
- The heat pad may cool down after a short period. This is normal. The fast re-heating according to the setting will follow immediately.
- To switch the unit off, move the switch back to position 0. The power LED 1 will go out, indicating that the unit is switched off. Unplug the unit from the main outlet.
- Move the switch to position 1 for any continuous use. The heat pad will switch off automatically after approx. 90 minutes of continuous use.
- To switch it back on again, move the slider switch to position 0 and then back to the desired heat setting.
- Unplug the unit from the main outlet once you have finished using it.
Troubleshooting
- If there is no function at all after switching on the heat pad (power LED 1 shows no light), please check if the mains plug is correctly plugged into the mains outlet. If this is the case, the heat pad is defective. Please do not use the heat pad and contact the service centre.
Cleaning and maintenance
- Before cleaning the pad, unplug it from the mains outlet and let it cool down for at least ten minutes.
- The heat pad is equipped with a removable control unit (HP 650).
- Unplug the control unit from the heat pad by pulling out the connection cable from the plug on the heat pad.
- The heat pad can be cleaned dry (with a soft brush) or as described in the instructions on the product label.
- Never use strong detergents or hard brushes.
- To dry, lay the pad flat on a moisture-absorbent towel or mat.
- Only use the blanket again once it is completely dry.
- Reconnect the control unit to the heat pad in the correct manner.
- You should untangle the cable from time to time.
- Store the unit in a clean and dry place, laid out flat with nothing covering or resting on top of it.
Disposal
This product must not be disposed of together with domestic waste. All
users are obliged to hand in all electrical or electronic devices, regardless
of whether or not they contain toxic substances, at a municipal or commercial
collection point so that they can be disposed of in an environmentally
acceptable manner. Consult your municipal authority or your dealer for
information about disposal.
Technical specifications
- Name and model : medisana Heating pad XL HP 650
- Power supply: 220-240V~, 50/60 Hz
- Heat output: 100 watts
- Automatic switch- off: after approx. 90 minutes
- Dimensions approx.: 45 x 35 cm
- Weight approx.: 0.5 kg
- Operating conditions: Only use in dry rooms according to this user manual
- Storage conditions: Laid out flat, clean and dry
- Art. number : 48840
- EAN number: 40155 88 48840 5
By our policy of continual product improvement, we reserve the right to technical and design changes without notice.
Warranty
Warranty and repair terms
Please contact your dealer or the service centre in case of a claim under
the warranty. If you have to return the unit, please enclose a copy of your
receipt and state what the defect is.
The following warranty terms apply:
- The warranty period for Medisana products is one year from the date of purchase. In case of a warranty claim, the date of purchase has to be proven using the sales receipt or invoice.
- Defects in material or workmanship will be removed free of charge within the warranty period.
- Repairs under warranty do not extend the warranty period either for the unit or for the replacement parts.
- The following is excluded under the warranty:
- a. All damage that has arisen due to improper treatment, e.g. non-observance of the user instructions.
- b. All damage that is due to repairs or tampering by the customer or unauthorised third parties.
- c. Damage that has arisen during transport from the manufacturer to the consumer or during transport to the service centre.
- d. Accessories that are subject to normal wear and tear.
- Liability for direct or indirect consequential losses caused by the unit is excluded even if the damage to the unit is accepted as a warranty claim.
medisana GmbH
Carl-Schurz-Str. 2
41460 NEUSS, GERMANY
FAQ
- Q: How long does it take for the heat pad to heat up?
- A: After plugging in and switching to position 1, the pad will start getting noticeably warmer within a few minutes.
- Q: What should I do if the heat pad gets too hot?
- A: If the heat pad becomes too hot, move the slider back to position 3, 2, or 1 to lower the temperature. The pad will cool down after a short time.
- Q: Can I leave the heat pad unattended?
- A: It is recommended to unplug the unit from the mains outlet once you have finished using it to avoid any potential hazards.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>