MDCMDCM 2023 Solar Lights Outdoor Waterproof Motion Sensor User Manual

MDCMDCM 2023 Solar Lights Outdoor Waterproof Motion Sensor

Please read the user manual carefully before use

Specifications

• Solar Panel: 5.5V 1.8W
• Battery: 3.7V 2400MAH
• LED Quantity: 416LED
• Rated Power: 8W
• Dimensions: 13.76*4.39 in
• Net Weight: 0.55kgs
• IP Rating: IP65

Package Includes

Product Features

• Widely used in courtyards, garages and other sunlit areas for lighting.
• This is a solar product, please choose a sunny place to ensure effective charging during the day. The longer the light, the longer the light.

Remarks

• This is a solar energy product, please choose a location that receives adequate sunshine to ensure effective charging during the day.
• The longer it gets sunshine the longer it can illuminate.

Product Warranty

• We provide our lamp with a 12-month limited warranty from the date of purchase.
• To make a warranty claim please contact the seller you purchased this light from.

Warranty Limitations

The following are not covered by our warranty:

1. Purchases from non-authorized sellers or distributors.
2. Damage resulting from fire, moisture, improper use, physical shock or other damage occurring after purchasing the lamp.
3. If the item has been dismantled or modified after purchase.

Lighting Modes

• Automatically turns off during the day and will only turn on when it senses movement at night. The light will turn off after 30 seconds of no movement.
• If people used remote control, the light will stay the function what people used last time.The light have the memory function.

About the Brightness

This MDCMDCM LED Solar Light has 3 levels adjustable brightness(30%-60%-100%).
The Brightness and mode can totally swith by remote. When you find that the brightness is not bright enough:

1. Please place the light in a sunny place at least charge 8 hours before first time use.
2. Please use the remote adjust the brightness you want it.

Toggle Seven Gears

• Off → Sensing for 30s + Off → Always on Brightness → Dim Mode + Sensing for 30s

Remote

• ON: Turn on the Light
• OFF: Turn off the Light
• MODE1: Sensor Mode
• MODE2: Continuous on All Night
• MODE3: Dim Mode + Sensor Mode
• “-“: lower brightness (100%-609-3096)
• “+”: Brighten the brightness (30%-60%6-100%)

Installation

1. Punch holes in the wall, place expansion plugs, and screw the wall bracket to the wall.
2. Press the button switch to turn on the light.
3. Fix The lamp on the wall frame and adjust the angle of the lamp according to your requirement.
4. Installation complete

Note

1. The internal light sensor ensures the movement sensor will not activate during the day. when the ambient light becomes dark the sensor will activate.
2. The product is equipped with an internal lithium battery, please do not replace it by yourself, put it with household garbage or place it near sources of heat. It should betaken to your local battery disposal center.
3. A full charge requires up to 9 hours of sunlight. mounting location, weather conditions and seasonal variation will directly influence the actual run time experienced.

Precautions

Warm Tips

• Solar panels must be installed in direct sunlight, insufficient charging will seriously affect the brightness and lighting time.
• There should be no light shining on the solar panel at night, otherwise the lighting will not be normall

EMAIL: cs@mdcmdcm.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>