WORLDE Orca PAD64 Pro Portable USB MIDI Drum Pad Controller User Manual

WORLDE Orca PAD64 Pro Portable USB MIDI Drum Pad Controller

Product List

Please check all the items in your package:

• The Orca PAD64 product 1 pcs

• USB cable 1 pcs

• USB power cord 1 pcs

• MIDI to 3.5 audio cable 1 pcs
  Notice: To ensure your Orca PAD64 can be used properly, please use both the USB cable and USB power cord for power supply.

  1. Connect your Orca PAD64 to your computer with both the USB cable and USB power cord if you are using it with a PC.
  2. When using it with a mobile phone or Pad, connect your Orca PAD64 to your mobile phone /Pad and mobile phone charger respectively with the USB cable and the USB power cord simultaneously.

Setup in Ableton Live

Once you have your Orca Pad64 connected to your computer, open the Ableton Live in your computer, then go to “Preferences”. From the list of tabs on the left, click the MIDI / Sync tab and you will see the following:

Introduction

Thank you for purchasing the Worlde Orca PAD64 USB MIDI controller. To help you get the most out of your new instrument, please read this manual carefully. In order to use the functions of this product, you’ll need to make settings in the application you’re using. Make settings as described in the owner’s manual for your application.

Features

• 64 high quality velocity & pressure sensitive performance pads with RGB backlit, can be assigned easily as pads, MIDI CC buttons or Program change switches.
• Function buttons, providing functions like, OCTAVE, AFTERTOUCH, VELOCITY, MUTE and etc.
• USB interface, adaptable to USB 2.0(FULL SPEED). Power supplied by USB.
• MIDI IN, MIDI OUT
• Compatible with Win10/8/7/XP/Vista and Mac OSX. Drive free and hot-plug supported.
• Edited by the Orca PAD64 Software Editor, the picture below is the main screen. It can be downloaded from www.worlde.com.cn for this software editor.

Parts and Their Function

Orca PAD64 Overview

1. Buttons/Scene Launch buttons These buttons can transmit control change messages. Each button can be used to send continuous control data to a desktop audio workstation or external MIDI device. When used with Ableton Live, these buttons are default as scene launch buttons. It can also be assigned to other functions if required. When it’s used as Scene Launch buttons the operation steps are as follows: Pressing the Scene Launch buttons on the right side of your Orca PA64 will trigger horizontal rows of clips, also known as ‘scenes’. These buttons allow you to launch, stop, and/or record multiple clips with one button, and are fantastic for performance. Just like the 8×8 grid of pads, the Scene Launch buttons match the scene colours on your Live screen.
2. [Memory] button Holding the memory button and pressing one of the pads to recall the parameters in Memory area. Press the MEMORY button. The system enters the storing state, it stores 6 groups setup value.
3. Trigger pads Pads can transmit note messages or control change messages. The pads can be used to trigger drum hits to our software or hardware module. The pads are pressure and velocity sensitive, which makes them very responsive and intuitive to play. Use the Orca PAD64 Software Editor to select the backlit RGB color of 48 pads. We’ll show you how to select the backlit RGB color of48 pads in section 5.2.
4. [Note] button The 64 pads have dual modes: trigger pads mode and key note mode. Click the note button to start the note mode of the 64 pads, press +/-button to increase or decrease the current note by semitone.
5. [Octave] button Click the Octave button to start the Octave function, use+/-button to adjust Octave. Adjustment range is from 0 to 4. Press DATA +/- buttons at the same time to set octave to initial 0
6.  [A.Touch] button Click the A.touch button to start the function of channel after touch and keyboard after touch. Channel after touch is on when the LED color is red for the A.touch button. Keyboard after touch is on when it’s blue for the A.touch button. When channel after touch in on, the system sends channel after touch info when pressing the pads. When keyboard after touch in on, the system sends keyboard after touch info when pressing the pads.
7. [Channel] button Click the channel button to start the channel function, use+/-button to select the channel. The initial setting is 1, adjusting scale is 1~16.
8. [Velocity]button Click the velocity button to start the velocity selection function, the medium(or normal) velocity is on when the LED color of velocity button is green, heavy velocity is on when it’s in red color, and blue for constant velocity.
9. [Mute] button Mute ON/OFF button. Click mute button will start the mute function. No message will be transmitted under Mute mode.
10. [Volume] button It sends GM Master Volume message（F0 7F 7F 04 01 00 xx F7).
11. [MMC] button There are 6 buttons used for MMC-[|<<],[<<],[>>],[O],[stop],[play].It is common to set the 6 buttons as Sequencer remote control buttons, it needs to be working with sequencer software. Factory default is MMC mode. Press [|<<] and [play] button simultaneously will start the CC mode of the buttons. In this mode, buttons will transmit control change messages.
12. [<] and [>] button These buttons are used for navigating through fields of menus and options.
13. Full Sized USB connector Connect the Orca PAD64 to your computer with a USB cable via this port.
14. [MIDI OUT] Connector Use a five-pin MIDI cable to connect the MIDI OUT of the Orca PAD64-A to the MIDI IN of an external device.
15.  [MIDI IN] Connector Use a five-pin MIDI cable to connect the MIDI OUT of an external MIDI device to the MIDI IN of the Orca PAD64-A.
16.  DC 5V 5V power input interface.
17. [OFF/ON] button Power Off/On button.

The pads/preset buttons

Orca PAD64 has 64 high quality velocity & pressure sensitive performance pads with RGB backlit which can be assigned easily as pads, MIDI CC buttons or Program change switches. The pads can be used to trigger drum hits to our software or hardware module. The pads are pressure and velocity sensitive, which makes them very responsive and intuitive to play.

Parameter control buttons

These buttonss transmit control change messages. The 8 buttons can be assigned to control any editable parameter on the selected device. Each buttons can be used to send continuous control data to a desktop audio workstation or external MIDI device.

• Note button: The 64 pads have dual modes: trigger pads mode and key note mode. Click the note button to start the note mode of the 64 pads, press +/-button to increase or decrease the current note by semitone.
• Octave button: Pushing the Octave buttons will transpose the keyboard by as much as four octaves up or down. The farther from center the keyboard has been transposed, the faster the buttons will flash. Click the Octave button to start the Octave function, use+/-button to adjust Octave. Adjustment range is from 0 to 4. Press DATA +/- buttons at the same time to set octave to initial 0.
• A. TOUCH button: Click the A.touch button to start the function of channel After touch and keyboard after touch. Channel After touch is on when the LED color is red for the A.touch button. Keyboard After touch is on when it’s blue for the A.touch button. When Channel After touch in on, the system sends Channel After touch info when pressing the pads. When Keyboard After touch in on, the system sends Keyboard After touch info when pressing the pads.
• Channel button: Channel selection function button, selecting current MIDI channel. Click the channel button to start the channel function, use+/-button to select the channel. The initial setting is 1, adjusting scale is 1~16.
• Velocity button: Every time you press a key, a MIDI note message is sent with a velocity value between 0 and the maximum; this value specifies how hard you pressed the key. Since different people have different playing styles, your Orca PAD64 offers a number of different velocity curves. You should experiment with the different velocity curves to find the curve that best suits your playing style. Click the velocity button to start the velocity selection function, the medium(or normal) velocity is on when the LED color of velocity button is green, heavy velocity is on when it’s in red color, and blue for constant velocity.
• Mute button: Mute ON/OFF button. Click mute button will start the mute function. No message will be transmitted under Mute mode.
• Volume button: Master volume button. Click this button to set the master volume of Orca Pad64. It sends GM Master Volume message（F0 7F 7F 04 01 00 xx F7).
• [MMC] button: There are 6 buttons used for MMC-[|<<],[<<],[>>],[O],[stop],[play].It is common to set the 6 buttons as Sequencer remote control buttons, it needs to be working with sequencer software. Factory default is MMC mode. Press [|<<] and [play] button simultaneously will start the CC mode of the buttons. In this mode, buttons will transmit control change messages.

Memory button
Holding the memory button and pressing one of the pads to recall the parameters in Memory area. Press the MEMORY button. The system enters the storing state, it stores 6 groups setup value.

[ <] and [>] button
These buttons are used for navigating through fields of menus and options.

Back panel overview

The back panel of the Orca PAD64 contains some important connectors: the USB Type B jack, MIDI IN/MIDI OUT jack, DC 5V jack, ON/OFF button.

Setup

Minimum System Requirements

for laptops)
256MB RAM| OS X 10.3.9 with 256 MB RAM,
Direct X 9.0b or higher| OS X 10.4.2 or greater with 512 MB RAM
Windows XP(SP2)or higher| *G3/G4 accelerator cards are not supported
(Windows 98,Me,NT or 2000 not supported)|

Making detailed settings

The following settings cannot be edited on the Orca PD48 instrument, so you need to use the Worlde Orca PAD64 control Editor. You can download the Worlde Orca PAD64 control Editor from Worlde website www.worlde.com.cn.

Using Orca PAD64 with Software

Creating MIDI Presets with the Orca PAD64 Software Editor

Overview: What is a Orca PAD64 Preset?
Thanks to the Orca PAD64 Software Editor it’s possible to configure the Orca PAD64 to work with practically any device or software capable of responding to MIDI information.
To summarize, here are some examples of what you can do with a Orca PAD64 preset:

• Assign pads to send MIDI Machine Control commands (MMC)
• Use the pads to transmit MIDI notes
• Switch between two values of any MIDI CC# by playing a pad
• Assign a button to control any MIDI CC# and define its operational range
• Save the entire set of altered controls to one of Orca PAD64’s eight preset locations
• Define another seven sets of parameter assignments and save each one to a different memory location
• Recall any of the eight personalized presets easily and immediately

Assign a Pad to Start/Stop MMC
One feature that often comes in handy with a controller keyboard is the ability to start and stop a song without having to use the computer keyboard or mouse. It’s really easy to set up the Orca PAD64 pads to do that.
For example we’ll use Pad 7 to send Stop commands and Pad 8 to send Start commands. This is accomplished through the use of MIDI Machine Control commands, which you’ve probably seen abbreviated as “MMC”.
Select the Pad Mode
Let’s begin by selecting Pad 7 by clicking on its graphic in the MIDI Control Center or by tapping Pad 7 on the Orca PAD64. Then click the Mode field to activate the pull-down menu:

Set the MMC Message number
Once the Mode has been set to MMC, the trick is to set both the LSB and MSB to the same number so the pad knows which command to send. MMC Stop command needs the CC number set to 1, like so:

Next, select Pad 8 so we can set it to the MMC command for “Start”. This means the CC number must be set to 2:

Now you should have Pad 8 set to start your song and Pad 7 set to stop it. Of course you can assign those functions to any pad you like, now that you know how to do it.
Assign a couple of Pads to MIDI notes
The natural thing to do when you’re starting a song is to lay down the kick and snare tracks. The Orca PAD64 pads can be assigned to any MIDI note number that you like, so for this example we’ll set Pads 1 and 2 to trigger the General MIDI note numbers for the Bass drum and Snare drum (MIDI note numbers 36 and 38, respectively). By default the pads have their Mode set to MIDI note, so when you select each Pad we’ll get right down to selecting the MIDI note number and velocity values. Let’s leave the other setting to “Gate” so the notes shut off when you lift the pad; you can try the “Toggle” value later if you’d like the MIDI note to stay “On” until you hit the pad a second time.
Select the MIDI note number: Kick
The CC number field is used to set the MIDI note number, which makes sense: there are 128 MIDI Controller numbers and 128 MIDI Note numbers. So click the pull-down menu and set this value to 36 to select the General MIDI Kick drum note number: We’ll show you how to set Pad 2 to the Snare drum note number in section 5.1.3.2.

Select the MIDI note number: Snare
Setting Pad 2 to trigger the snare is done the same way, only by choosing a different MIDI note number (38 in this case):

So now you’re ready to lay down the groove for your song: You have Pads 1 and 2 set to play the Kick and Snare, and Pads 7 and 8 set to Stop and Start the song.
Assign a Pad to toggle a MIDI CC # between two values
One popular musical effect these days is to take an audio loop, filter it heavily for certain sections of a song, and switch it back to the full-open sound later in the song. You can pre-configure one of the Orca PAD64 pads to send those commands to a filter plug-in that should be readily available in your DAW software. We’ll use Pad 6 for this example. Select it and then use the pull-down Mode menus to select “Switched” and “Toggle”:

These settings will allow you to send two different values of a particular MIDI CC number each time you press the pad. There are a couple of MIDI CC numbers that have been assigned the task of controlling filter brightness (CC# 74) or harmonic content (CC# 71). We’ll use CC# 74 for this example. Click on the CC number field and select the Brightness controller number as shown:

Next we’ll set some minimum and maximum values that might work (adjust them to suit the audio source):

The first press of Pad 6 will send a CC# 74 command with a value of 78, which will close the filter down part way but still let a lot of the audio pass through. The second press of Pad 6 will send a value of 127, opening the filter completely.

Note: Be sure to check the MIDI Channel assignment to make sure it matches that of the receiving device.
Save the changes to a Preset
So let’s review what we’ve done in section 5.1 so far: The pads have been set up to play kick and snare, toggle the filter settings, and start / stop the song; one of the encoders is controlling the vibrato rate, and the Mod strip is controlling Aftertouch. Not bad! There’s a lot more Orca PAD64 can do, but that’s a good start. So the next thing to do is make sure this configuration is available when you want it. To do that, you need to save these settings as a group into one of the eight memory locations in the Orca PAD64. The upper right-hand section of the MIDI Control Center software has a button called “Send to Keyboard”. Right below that is a pull-down menu that allows you to specify which of the TUNAMINI’s eight memory locations will be the repository for the Preset you’ve created. Before clicking the top button, select a location you know is available. We’ll use memory location #2 for this example:

Select #2 in the drop-down list as pictured above. Once you’re sure where the preset will be stored, click the “Send to Keyboard” button:

Recalling a Preset / Switching between Presets
Once you’ve created a couple of presets you can switch between your personalized configurations very quickly. This is as simple as it can be: simply hold the Memory button and press one of the 4 pads as shown in picture below.

Select the Backlit RGB Color of 64 Pads
Use the Orca PAD64 Software Editor to select the backlit RGB color of 64 pads. You can download the Orca PAD64 Software Editor from Worlde website www.worlde.com.cn. Press the pad and the red circle button √○ will appear on that, then select the color range No. for CR,CG and CB. Press the “Send to Keyboard” to send the parameters to the Orca PAD64 and then press the OK button to confirm. The color range is from 0 to 127 for each one.

Appendix

Appendix A- Toxic or Hazardous Substances and Elements

Part Number, Name and Description

| ****

Toxic or Hazardous Substances and Elements

---|---

Pb

| ****

Hg

| ****

Cd

| ****

Cr(VI))

| ****

(PBB)

| ****

(PBDE)

PCB| ○| ○| ○| ○| ○| ○
PCBA Welding Spot| ○| ○| ○| ○| ○| ○
Components| ○| ○| ○| ○| ○| ○
Metal Parts| ○| ○| ○| ○| ○| ○
Plastic and Polymeric parts| ○| ○| ○| ○| ○| ○
Paper Accessory| ○| ○| ○| ○| ○| ○
Power Cord| ○| ○| ○| ○| ○| ○
○ ： Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C is below the limit requirement in SJ/T 11364.

× ： Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C is above the limit requirement in SJ/T 11364.

(Enterprises may further provide in this box technical explanation for marking”X”based on

their actual conditions.)

Specifications

• Connectors: USB connector
• Power supply: USB bus power mode
• Current consumption: 100 mA or less
• Dimensions (W x D x H): 256x256x36mm
• Weight : 840g
• Included items: USB cable, Owner’s manual
  *Specifications and appearance are subject to change without notice.

Sales Head Office
Hangzhou Worlde Music Electronic Co., Ltd
Add:18Xianxing Rd, Xianlin Industrial Park, Yuhang District, Hangzhou, 311122,P.R.China Tel:0086 571 88730848 Fax:0086 571 88730748
Email:[email protected] Website:www.worlde.com.cn

References

• HANGZHOU BLUE WHALE MUSIC TECHNOLOGY-

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>