LENVII R777 Portable Barcode Scanner User Manual

LENVII R777 Portable Barcode Scanner User Manual

Introduction

wireless Bluetooth and Type-C transmission modes, these transmission modes can be switched any time. When the scanner turns on, it will automatically enter the interface detection status, if the Type-C cable is connected and recognized, the scanner wil enter the wired transmission mode, otherwise it will enter wireless transmission mode

Factory default () Note: Factory default settings are marked with an asterisk “” in this manual

1.2.4G Receiver mod.

To enter the paiing status, first scan “2.4G Receiver Mode”, then scan “Pairing Setting’(the green light wil flash or the screen will flash (optional) ). Now plug the USB dongle into the device, when hearing a *beep” sound, it means the pairing is successful and the blue light is always on or the screen stops flashing (optional). (The whole pairing process takes about 1min, if timeout and the pairing failed, it will automatically exit the pairing mode)

2.Bluetooth pairing

To enter the pairing status, first scan’Bluetooth HID Mode”, then scan “Pair Setting’(the green & blue light will flashor the screen will flash (optional) ). Now turm on the Bluetooth in your device , search and select the device “Barcode Scanner HID”, when hearing a beep” sound, it means the pairing is successful and the blue light is always on or the screen stops flashing (optional). (The whole pairing process takes about 1 min, if timeout and the pairing failed, it will automatically exit the pairing mode)

Inventory Mode

The scanner exceeds the transmission distance, we suggest to use inventory model The scanner data is storied directly in the memory. If the memory is full, three alarms will be sounds, and green light wil fiash 3 times.

Note: upload all data, means that upload all data in storage.

Delete all data

Note: Delete all data, will delete all data in storage, Data will not be restored after deleting, make sure the data has been uploaded for backup before deleting.

Bluetooth upload speed setting

Language Setting

LED Indicator

1. Red light is always on when charging, it tus off when the battery is full or the charging line is not connected.If the red light flashes, the battery may be not applied or not applied appropriately;
2. Regular blue light indicates that all connections are in good condition;
3. .Green light flashes when under 2.4G connection Or the screen flashes (optional);
4. Green & blue lights flash synchronously when under HID connection O the screen flashes (optional);

Buzzer Description

Display Power

Notification:
Display version
[OF40] [=]

1. Please read this manual carefully before sing the barcode scanner;
2. The charging voltage of the scanner is 5V, please use a 5V/1A power adaptor for charging to ensure that there is sufficient power for the normal operation of scanner;
3. .0ur company reserves all rights, and reserves the right to make changes to the productto improve ts reliabilty, functionality or design;
4. This package includes: 1 barcode scanner; 1 receiver; 1 Type-C cable; 1 users manual;
5. Please be advised that any revision of this manual will not be informed.

Read More About This Manual & Download PDF:

References

• LENVII is a global one-stop commercial electronic supply chain brand, covering POS terminal cash registers, barcode printers, barcode scanners, receip

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>