BRAUN BC09G Digital Alarm Clock with Snooze User Guide
- June 14, 2024
- Braun
Table of Contents
BRAUN BC09G Digital Alarm Clock with Snooze
Product Information
The BC09 Alarm Clock is a reliable and user-friendly device designed to help you keep track of time and wake up on schedule. It features a sleek and modern design, making it a stylish addition to any room. The clock operates on 1x AA size battery (not included) and comes with a battery compartment for easy installation. The clock also has an alarm function and snooze function, providing added convenience for your daily routine.
Product Usage Instructions
Battery Installation
- Remove the battery door.
- Insert 1x AA size new battery into the battery compartment as indicated.
- Press the RESET key to reset the clock. The display will turn on after a few seconds.
- Close the battery door.
Note: Only use new alkaline batteries from a reputable brand.
Setting the Time
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the TIME SETTING position.
- Press the ‘+’ or ‘-‘ key to set the desired time value.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to save the settings and return to the normal display.
Setting the Alarm
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the ALARM SETTING position.
- Press the ‘+’ or ‘-‘ key to set the desired alarm time.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to save the settings and return to the normal display.
Using the Alarm Function
- Enable the alarm by pushing the ALARM ON / OFF slider up (so the green indicator is visible).
- To disable the alarm and activate the snooze function, push the ALARM ON / OFF slider down.
Using the Snooze Function
Tap the SNOOZE touch button to stop the alarm and activate the snooze function. When the snooze function is activated, the alarm will automatically start again after 5 minutes. The snooze function will not stop unless the ALARM ON / OFF SLIDER is pushed down.
PRODUCT OVERVIEW
Battery installation
- Remove the battery door.
- Insert 1x AA size new battery as indicated in the battery compar 1tment ( ) and press the RESET k 5ey ( ) to reset the clock. The display will turn on after a few seconds.
- Close the battery door.
Only use new alkaline batteries from a reputable brand.
Setting the time
- Slide the TIME SETTING / NEUTRAL / ALARM SET 2TING switch ( ) to the TIME SETTING position.
- Press the ‘+’ or ‘-’ key ( ) to set the desired value.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Setting the alarm
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch ( ) to the AL2 ARM SETTING position.
- Press the ‘+’ or ‘-’ key ( ) to set the desired value.
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Using the alarm function
- Enable the alarm by pushing the ALARM ON / OFF 3slider ( ) up (so the green indicator is visible).
- To disable the alarm and snooze function, push the ALARM ON / OFF slider down.
Using the snooze function
Tap the SNOOZE touch but 6ton ( ) to stop the alarm and activate the snooze function. When the snooze function is activated, the alarm will automatically start again after 5 minutes. The snooze function will not stop unless the ALARM ON / OFF SLIDER is pushed down
For detailed information refer to the full user manual available at www .braun-clocks.com/pages/warranty or scan this code:
Braun helpline
Should you have a problem with your product, please check your local service
centre at: www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the Procter & Gamble Company or its
affiliates.