JOZOOES 712 Commercial Countertop Induction Cooker User Manual
- June 14, 2024
- JOZOOES
Table of Contents
JOZOOES 712 Commercial Countertop Induction Cooker
Product Information
The induction cooker is an efficient and energy-saving kitchen appliance. It features high thermal efficiency, saving time andenergy. The cooker is safe and reliable with low voltage and high voltage protection, overheat protection, sensor failure protection, internal overheat protection, and protection against improper pot usage. It is environmentally friendly as it does not produce open flames or smoke during cooking, ensuring the health and safety of your home and family members. The cooker is equipped with computer control, allowing for adjustable heating power to suit different cooking needs. It also has an automatic function with an intelligent detection system for all-round protection. The cooker is easy to clean and maintain with its high-strength heat-resistant microcrystalline panel.
Instruction
Please read the instruction manual carefully before use this product
Instructions for use
How to make induction cooker start and stop working
- Plug in the power supply, the buzzer will ring a long time, and the power indicator will flash, the induction cooker is in standby state. Then press the “ON/OFF” key, the buzzer sounds a short time, and the fan starts to rotate the induction cooker. Press the “+ / -” key to adjust the firepower If you need to exit the working state, press “on/off” directly to exit the working state and return to standby and then unplug the power plug.
NOTE : Please place the right cooker on the panel after starting the induction cooker.
Maters needing attention
-
This machine should be placed horizontally, and should not be too close to other items, atleast ten centimeters apart, This is to ensure that the air at the inlet and outlet can circulate normally.
-
Keep away from gas stove or kerosene stove when using, because the ambient temperature is too high, which may cause the induction cooker to stop working.
-
It is strictly forbidden to use gasoline, toluene and other solvents to clean induction cooker. It is strictly forbidden to use near the water source or wash the induction cooker.
-
Do not heat aluminum foil directly or indirectly, which may cause danger.
-
Please do not heat the bottom of the pot with paper / cloth and other articles to avoid burning and danger.
-
Do not place items such as credit card, watches or radios near the machine body to avoid being affected by the magnetic field of the machine.
-
Do not place airtight cans on the panel. Airtight cans may cause danger after heating.
-
After using this induction cooker, please do not touch the panel with your hands to avoid scalding.
-
It is strictly forbidden to heat empty pots (this is the main cause of pot deformation and machine damage) to prevent machine damage or danger.
-
Please do not use the induction cooker on iron or magnetic metal workbench.
-
The panel plate of induction cooker should avoid collision as much as possible. If the panel of induction cooker breaks, please shut down immediately and unplug the power plug.
-
Please use a special socket for the plug and make sure it is in good condition with the socket. Do not use extension cords.
Product characteristics
Efficient and energy- saving
-
- High thermal efficiency, energy saving, fast and saving your time.
Safe and reliable
-
- Low voltage protection and high voltage protection.
-
- Overheat protection of furnace surface.
-
- Sensor failure protection.
-
- Internal overheat protection.
-
- No pot or pot material is not properly protection.
-
- Small objects will not be heated voltage protection.
-
- Automatic shutdown (no operation within two hours).
Environmentally friendly
-
- No open flame and smoke in cooking to protect the health of home and family members.
-
- There are no dangerous accidents such as leakage and burn of liquefied gas. Computer control
-
- A variety of heating power adjustment is convenient and suitable for different cooking needs; Automatic function has intelligent detection system for all-round protection.
Easy to clean
-
- High strength heat-resistant microcrystalline panel is easy to clean and maintain; When the soup overflows, just remove the pot and wipe it with a rag.
Use utensils
Suitable pot containers
- Iron series(enamel cast iron stainless steel) or magnetic induction material bottom pot. A flat pot with a bottom diameter of more than 12 CM and less than 26 CM.
Inapplicable pot containers
Pots made of ceramic, glass, aluminum and copper with bottom diameter less
than 12 cm. Pots With uneven bottom.
Special Note : Magnetic metal covers such as iron or
stainless steel knives, forks and spoons or other magnetic metals should not
be placed on or around the panel of induction cooker because they may be
heated and cause burns.
Common fault codes
Common fault codes of induction cooker
- E0 – No pans or material is not suitable
- E1 – Low Voltage Protection
- E2 – High Voltage Protection
- E3 – Main board IGBT thermistor short circuit or open circuit protection
- E4 – Short circuit or open circuit protection of furnace surface thermistor E5- Dry burning protection
- E5 – Pot bottom probe over temperature
- E6 – Main Board IGBTO Over Temperature Protection
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>