caple CAFF60 Six Compartment Professional Fridge Freezer Instruction Manual

Fridge Freezer
Instruction Manual
CAFF60 Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk 

GENERAL FEATURES OF CAFF60

• Can be installed built-in or freestanding
• 304 grade high hygienic stainless steel construction
•  Dual refrigeration system with two compressors and three evaporators
• Sophisticated data logging system
• Dot matrix multi-information display
•  Luminated touch-sensitive controls
• Heat insulated triple Low-E glass window
• Ambient humidity sensor for adjusting best energy performance
• LED lighting with magnetic door sensor
•  Shelf holder with LED lighting
• Corona light function
• Fresh bin compartment to keep vegetables fresh longer
• Storage drawers allow easy access to food with removable divider
•  Automatic ice maker with advanced water filtration system
• Marinating tray
• Sabbath mode.

SAFETY INSTRUCTIONS

WARNING:
This appliance contains R600a as a refrigerant. You should be careful during transportation to prevent your appliance’s cooler elements from being damaged.
Although R600a is an environmentally friendly and natural gas, as it is explosive, If the cooler elements are damaged a leak may occur. Keep your fridge away from open flames or heat sources and ventilate the room where the appliance is located.
WARNING:
Keep ventilation openings in the appliance enclosure or in the structure for building in, clear of obstruction.
WARNING:
Do not use mechanical devices or other artificial means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING:
Do not use electrical appliances in the freezer compartment of the appliance, unless they are of the type recommended by the manufacturer
WARNING:
Do not damage the refrigerant circuits.

CAUTION:
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
CAUTION:
The appliance can be used by children aged 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
CAUTION:
If the supply cord is damaged, it must be replaced by Caple, an approved engineer, or similarly qualified persons in order to avoid a hazard.
CAUTION:
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

CAUTION:
If the power socket does not match the refrigerator plug, it must be replaced by Caple, an approved engineer, or similarly qualified persons in order to avoid a hazard.
CAUTION:
A specially grounded plug has been connected to the power cable of your refrigerator. This plug should be used with a specially grounded socket of 16 amperes. If there is no such socket in your house, please have it installed by an authorized electrician.
IMPORTANT NOTE:
– This product is not designed for commercial use, it is a household appliance only. It is not intended to be used in:
• Staff kitchen areas in shops, offices, and other working environments.
• Bed and breakfast type environments.
• By clients in hotels, motels, and other residential-type environments. Please read this booklet before installing and switching on this appliance. Caple take no responsibility for incorrect installation and usage as described in this booklet

• When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
• Do not use a plug adapter.

****Symbol ISO 7010 W021
Warning; Risk of fire / flammable materials

RECOMMENDATIONS
» Do not use adapters or shunts which could cause overheating or burning.
» Do not plug old, warped power supply cables.
» Do not twist and bend the cables.
» Do not allow children to play with the appliance. Children must NEVER sit on drawers/shelves or hang from the door.
» Do not use sharp metal objects for removing ice on the freezer compartment; they could puncture the refrigerator circuit and cause unrepairable damage to the unit. Use the plastic scraper provided.
» Do not plug the power supply with wet hands.
» Do not place containers (glass bottles or tin containers) of liquids into the freezer especially gassy liquids as they could cause the container to burst during freezing.
» Bottles that contain a high percentage of alcohol must be sealed well and placed vertically in the freezer.
» Do not touch the cooling surfaces, especially with wet hands as you could be burnt or hurt.
» Do not eat ice, which has just been removed from the freezer.

INSTALLATION WARNINGS
» This appliance is suitable for connecting to 220-240V and 50 Hz.
» Before making the connection to the power supply,ensure that the voltage on the rating label corresponds to the voltage of electrical system in your home.
» Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact or the plug does not match, contact Caple or an authorised electrician for assistance.
» The plug should be accessible after the appliance is positioned.
» Caple is not responsible for failure to complete the ground connection as described in this booklet.
» Do not place the appliance in direct sunlight.
» Do not use in open air and do not expose to the rain.
» Place the appliance far from heat sources and in a well-ventilated position. The freezer should be at least 50cm from radiators and gas ovens and 5cm far from electrical ovens.
» Do not place heavy items on the appliance.
» The appliance must stand firmly and level on the floor. Use the two front leveling feet to compensate for an uneven floor.
» The outside of the appliance and the accessories inside should be cleaned with a solution of water and liquid soap; the inside of the appliance with sodium bicarbonate dissolved in lukewarm water. After drying replace all the accessories.
» Wait 3 hours before plugging the appliance into the main power to ensure proper performance.
» There can be an odor when you first switch on the appliance. It will disappear after you leave the doors open for a while. While you are waiting 3 hours to plug the appliance in you can leave the doors open.

ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about the treatment, recovery, and recycling of this product, please contact your local council, your household waste disposal service, or the retailer where you purchased the product.
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).

PARTS OF THE APPLIANCE

1. Engine compartment
2. Dot matrix multi-information display
3. Luminated touch-sensitive controls
4. Freezer with glass shelves
5. Refrigerator with glass shelves
6. Crisper drawer with fresh control compartment
7. Freezer drawer| 8. Ice compartment with ice cube tray
9. Heat insulated triple Low-E glass window
10. Detachable trim
11. LED lighting with magnetic door sensor
12. Shelf holder with LED lighting
13. Bottle drawer
14. Robust handle
---|---

CONTROL PANEL

By using the touch control panel, the temperature values of each compartment and useful modes can be easily arranged. The control panel is located on the right side of the upper cover. Below, you can find how to use the control panel and the features of the special modes of the CAFF60.
TEMPERATURE CONTROL
There are three different sets on the control panel which are freezers. fridge and chiller compartments. To arrange the temperature values, the below instructions can be followed.

TEMPERATURE SETTINGS:

• Press the MENU button (approx 23 seconds) then temperature set screen
• Press the NEXT I SELECT button to change the selected column.
• Press the UP or DOWN button to change the compartment’s temperature values. To return to the Main Screen you can wait IS seconds or press the MENU button.

For the freezer compartment, the temperature range is .24 to .16 ‘C. for Refrigerator and Chiller compartment, they are +2 to +8 K. Slight fluctuations of these values are normal. and depends on external influences such as an open door, the degree of humidity and the room’s temperate.
IMPORTANT NOTE:
Ways Slow 12 hours for compartments to reach the temperature you set.

CORONA LIGHT

This mode is used for arranging the interior refrigerator lighting ON / OFF while the door is closed. While the corona light is ON: despite the door being dosed, it provides visibility and easy access Below, you can find how to use the control panel and the features of the special modes of the compartment.

SETTINGS:

• Hold the MENU button (approx 23 seconds) until the Menu Function screen is seen.
• Choose Corona Light by using the UP Of DOWN buttons.
• Press NEXT! SELECT button then chooses ON / OFF. Settings are saved automatically after pressing the buttons.

To return to the Main Screen you can wait IS seconds or press the MENU button.

DOOR ALARM SOUND
This mode is used for controlling the door alarm function. If the mode is active. the alarm sounds when the door is open for more than 60 seconds.
SETTINGS:

• Hold the MENU button (approx 23 seconds) until the Menu Function screen is seen.
• Choose Door Alarm Sound by using the UP or DOWN button.
• Press the NEXT /SELECT button then choose ON / OFF. Settings are saved automatically after pressing the buttons.
• To return to the Main Screen you can wait IS seconds or press the MENU button.

ICE MAKER
This mode is used for controlling the ice maker function. SETTINGS:

• Hold the MENU button (approx 23 seconds) until the Menu Function screen is s
• Choose Ice Maker by using the UP or DOWN buttons.
• Press NEXT! SELECT button then chooses ON / OFF. Settings are saved automatically after pressing the buttons.
• To return to the Main Screen you can wait IS seconds or press the MENU button.

SABBATH MODE
This mode is used for deactivating all functions but basic refrigeration.
SETTINGS:

• Hold the MENU button (approx 2-3 seconds) until the Menu Function screen is seen.
• Choose Sabbath by using the UP or DOWN buttons.
• Press the NEXT / SELECT button then choose ON /OFF. Settings are saved automatically after pressing the buttons.
• To return to the Main Screen you can wait 15 seconds or press the MENU button.

FRIDGE ZONE MODE
This mode helps to operate the fridge zone. When the fridge zone mode is set as OFF, this compartment will not be cooled. SETTINGS:

• Hold the MENU button (approx 2-3 seconds) until the Menu Function screen is seen.
• Choose Fridge Zone by using the UP or DOWN button.
• Press the NEXT / SELECT button then choose ON /OFF. Settings are saved automatically after pressing the buttons.
• To return to the Main Screen you can wait 15 seconds or press the MENU button.

VEGETABLE ZONE MODE
This mode helps to operate the vegetable zone. When the Vegetable Zone Mode is set as crisp, the temperature of the vegetable compartment will be 12°C and the vegetables in that compartment will be kept fresh longer.
SETTINGS:

• Hold the MENU button (approx 2-3 seconds) until the MENU Function screen is seen.
• Choose Vegetable Zone by using the UP or DOWN buttons.
• Press the NEXT / SELECT button then choose ON / OFF. Settings are saved automatically after pressing the buttons.
• To return to the Main Screen you can wait 15 seconds or press the MENU button.

KEYPAD SOUND MODE
This mode is used for activating or deactivating the keypad sound.

SETTINGS:

• Press the MENU button (approx 2-3 seconds) until the Menu Function screen is seen.
• Choose Keypad Sound by using the UP or DOWN buttons.
• Press the NEXT / SELECT button then choose ON / OFF. Settings are saved automatically after pressing the buttons.
• To return to the Main Screen you can wait 15 seconds or press the MENU button.

DISPLAY BACKLIGHT
This mode is used to activate or deactivate the display backlight.
SETTINGS:
» Press the MENU button (approx 2-3 seconds ) until the Menu Function screen is seen.
» Choose Display Backlight by using the UP or DOWN button.
» Press the NEXT / SELECT button then choose ON / OFF. Settings are saved automatically after pressing the buttons.
» To return the Main Screen you can wait 15 seconds or press the MENU button.
DATE SET
This mode is used for setting the date.
SETTINGS:
» Hold the MENU button (approx 2-3 seconds ) until the Menu Function screen is seen.
» Choose Date Set by using the UP or DOWN button.
» Press the NEXT / SELECT button and then the date set screen will be seen.
» Press the NEXT / SELECT button to change the selected column.
» Press the UP or DOWN button to change DAY / MONTH / YEAR values.
» To return the Main Screen you can wait 15 seconds or press the MENU button.
TIME SET
This mode is used for setting the time.
SETTINGS:
» Hold the MENU button (approx 2-3 seconds ) until the Menu Function screen is seen.
» Choose Time Set by using UP or DOWN buttons.
» Press the NEXT / SELECT button to change the selected column.
» Press the UP or DOWN button to change the time.
» To return the Main Screen you can wait 15 seconds or press the MENU button.

STORAGE INFORMATION
SAFETY GLASS SHELVES
The safety glass shelves in the upper fridge and freezer compartment are tempered and have plated aluminum profiles mounted in front of them. The glass stoppers fixed the glass to provide the true positioning of the shelves. It is easy to remove the shelves, raise the shelf up and pull it towards you. Slowly remove out from the refrigerator. Repeat the process backward to reinstall.
IMPORTANT NOTE:
While removing and replacing the glass shelves use care to prevent breaking the glass and scratching the interior surface.
IMPORTANT NOTE:
Since the upper shelf dimensions are different than the others, ensure the shelves are installed in the correct positions.
IMPORTANT NOTE:
While loading shelves, pay attention not to exceed the glass alignment.
IMPORTANT NOTE:
Please do not place your foods in front of the aluminum shelf profiles as this may affect airflow. TRAY RUNNER
The tray runners are compatible with glass trays used in built-in ovens and similar dimensions. Tray runners are fixed under the fridge shelf. The glass tray is placed into the tray runners. The bottom shelf can be replaced with the middle shelf and vice versa. To insert a tray it is advised to align the tray with the rails and insert slowly till the end. To remove the tray, slowly pull it until derailed.
IMPORTANT NOTE:
While removing and replacing the oven tray use care to prevent breaking the glass and scratching the interior surface
IMPORTANT NOTE:
If the tray is hot. Wait until it cools down before replacing
IMPORTANT NOTE:
The steam of the hot food in the tray can stain the shelf directly above. Ensure this is cleaned regularly. STORAGE DRAWERS
The stainless steel drawers create a more spacious area for food. With their large interior volume, it is easier to store more foods in the drawers.
FRESH BIN
The Fresh Bin keeps vegetables fresh for a longer time. If necessary the fresh bin cover can be opened or closed so this compartment can be also used as a normal fridge compartment. To activate the fresh bin, pull the cover as shown in figure A. It will take its proper position when the drawer is closed. To deactivate the fresh bin, just push the cover to the final position as shown in figure B. STORAGE DRAWER DIVIDER
By using the drawer divider, it is easy to separate different types of food and it can be removed by unscrewing from the basket.

ICE-MAKER
The automatic ice-maker is located in the fridge compartment. Designed to unload the ice into the ice bucket located in the lower freezer drawer. The ice maker can be controlled from the control panel. The ice maker automatically stops producing ice, when the bucket is full. There is a plumbing connection and water filter system for the ice-maker which is explained in the installation guide.
IMPORTANT NOTE:
The ice-maker will not make ice immediately. Customers should not use the ice produced from the first use and discard the first few batches of ice. The ice bucket is removable for cleaning.

WATER FILTRATION SYSTEM
For producing clean ice; a water filtration system is used which supplies filtered water to the ice maker. The location of the filtration system is in the upper compartment and can be easily reached by opening the upper compartment cover. This comes already installed and can be easily replaced by the customer.
IMPORTANT NOTE:
If the unit has been turned off or the ice maker disabled for one month or longer, the water filter cartridge should be replaced once the unit and ice maker are back in operation.
IMPORTANT NOTE:
Do not use with that is microbiologically unsafe or unknown water quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
IMPORTANT NOTE:
The Filter cartridges should be changed every 6 months. The date and next changing date should be written on the cartridge.
However, there will be a warning on the display (FILTER) when the filter requires changing
REPLACING THE WATER FILTER CARTRIDGE (FILTER/CAFF60)

» To access the water filter cartridge which is located middle of the upper compartment, lift the cover by pulling it up.
» Slowly rotate the cartridge one-quarter turn counter-clockwise until it is free from the base.
DO NOT pull. While separating the cartridge, it is normal to see a small amount of water spill out.
» Remove the cap from the new water filter cartridge.
» Position it so the locking tabs can be inserted into the filter head.
» Rotate the filter slowly approximately one-quarter turn clockwise until it stops. DO NOT over-tighten.
» To clean the water system and the air from the line, the first full bucked of ice produced should be discarded after the new cartridge is installed.
» Replacement water filters (FILTER/CAFF60) can be purchased directly from www.caple.co.uk

WATER FILTRATION BYPASS MODE
If you choose not to use the water filtration system, by removing the water filter cartridge, the system started to work in Bypass mode. In this mode, the water gets to the ice maker without filtration.
When the cartridge is removed, the filtration system automatically goes into Bypass mode. To use the filtration system again put the cartridge back into the filter head.
IMPORTANT NOTE:
If a reverse osmosis system is used, the water filter cartridge must be removed to put the water filtration system into bypass mode.

FOOD STORAGE

FRIDGE COMPARTMENT
» Under normal operating conditions, you should set the temperature of the fridge compartment to +4 / +6 °C.
» In order to avoid frosting, humidification, and bad odors, food should be placed in the fridge in closed containers or covered with appropriate material.
» Hot food and beverages should be cooled to room temperature before being placed in the fridge.
» Vegetables and fruits can be placed into the crisper drawer without packaging.
IMPORTANT NOTE:
» Cover liquids and stews when you put them in the fridge. Otherwise, the humidity inside the fridge increases and this causes the fridge to become less efficient. Covering the food and beverages also allows you to protect their taste and flavor.
» Potatoes, onion, and garlic shouldn’t be kept in the fridge.
» Fridge drawers could be removed to increase the storage volume.
The volume which is declared at product specifications is the volume that is calculated without the fridge drawer’s baskets.

FREEZER COMPARTMENT
» The freezer compartment is used for storing frozen foods for a long time or for producing ice.
» If you leave the door of the freezer open for a long time, the frosting will appear on the lower stage of the freezer. Thus, air circulation will be obstructed. In order to avoid this, first, unplug the cord and wait until thawed. After the ice melts, you should clean the freezer.
» It is strongly suggested that you place your foods 1 cm away from a drawer on the rear and side walls.
» When ice bucket is removed, this drawer could be used as a 2-star freezer compartment.
IMPORTANT NOTE:
Please never refreeze frozen food after thawing them. It may be hazardous to your health as it may lead to food poisoning.

• Do not place hot food in the freezer before cooling them. This may cause other frozen food in the freezer to get decayed.
• When buying frozen food, make sure that it was frozen under appropriate conditions and that its package is not torn.
• Storing time for frozen food may differ according to the ambient temperature, frequency of door openings, thermostat adjustments, type of food, and the time between the buying of the food and placing of the food in the freezer. Always follow instructions on the package and do not exceed storing period.

Some spices in cooked food (aniseed, basil, dill, vinegar, spice mix, ginger, garlic, onion, mustard, thyme, marjoram, black pepper, Bologna sausage, etc.) may have a foul taste when stored for a long time. Therefore, frozen food should be spiced just a little, or spice should be added after the food is thawed.
The storing time for the food depends on the oil used. Margarine, veal fat, olive oil, and butter are suitable, but peanut oil and lard are not suitable.
Cooked food in liquid form should be frozen in plastic containers, other food should be frozen wrapped in plastic foil or in plastic bags.

FROZEN FOOD GUIDE

MEAT & FISH| PREPARATION| STORING TIME (MONTHS)| THAWING TIME IN ROOM TEMPERATURE (HOURS)
---|---|---|---
Steak| Wrapping In a foil| 6 -10| 1 – 2
---|---|---|---
Lamb| Wrapping In a foil| 6- 8| 1 – 2
Veal roast| Wrapping In a foil| 6 – 10| 1 – 2
Veal cubes| Wrapping Ina foil| 6 -10| 1 – 2
Lamp cubes| in small pieces| 4 – 8| 2 – 3
Minced meat| In packages without using spkes| | 1 – 2
Giblets (pieces)| In pieces| 1 – 3| 1 – 2
Should be packaged even If it has membrane| | Until it is defrosted
Bologna sausage/salami
Chicken & dud| Wrapping in a foil| 7 – 8| 10- 12
Goose & duck| Wrapping in a foil| 4 – 8| 10
Deer, rabbit, wild boar| In 2.5 kg portions and as fillets| 4 – 12| 10- 12
Fresh fishes (salmon, carp, crane, catfish)| After cleaning the bowels and scales of the fish, wash and dry it, and if necessary, cut the tail
and head.| 2| Until it Is thawed completely
Lean fish; bass, turbot| 4 – 8| Until it Is thawed completely
Fatty fishes (tuna,
mackerel, bluefish,
anchovy)| 2 – 4| Until it Is thawed completely
Shellfish| Cleaned and in bags| 4 – 6| Until it Is thawed completely
Caviar| In its packaged aluminum or plastic container| 2 – 3| Until it is thawed completely

NOTE:
Frozen meat should be cooked as fresh meat after being thawed. If the meat is not cooked after being thawed, it should never be frozen again.

VEGETABLES AND FRUITS| PREPARATION| STORING TIME
(MONTHS)| THAWING TIME IN ROOM TEMPERATURE (HOURS)
---|---|---|---
Cauliflower| Take the leaves apart, cut the heart into pieces and leave in water with a little lemon juice for a while| 10 -12| It can be used on frozen
String beans and beans| cut into small Wash a nice
pes| 10 -13| It can be used on frozen
Beans| Wash| 10 -13| it can be used on frozen
Mushroom and asparagus| and cut into small
Wash a pinto es| -9| It can be used on frozen
Cabbage| Wash| 6 – 8| 2
Eggplant| Cut to pieces of 2cm after
washing| 10 – 12| Separate them from one
another
Corn| Clean & pack with its stem
or as sweet corn| 12| 1 – 2
Carrot| Clean & cut to slkes| 12| Until It Is defrosted
Pepper| Cut the stern, cut Into 2
pieces & remove the core| 8 -10| 10 -12
Spinach| Washed| 6 – 9| 10
Apple & pear| Peel & slice| 8 -10| 10 -12
Apricot & peach| Cut into 2 pieces & remove
the stone| 4 – 6| Until It Is thawed completely
Strawberry & blackberry| Wash| 8 -12| Until It Is thawed completely
Cooked fruits| Adding 10% of the sugar
in the container| 12| Until It Is thawed completely
Plum, cherry| Wash & cut the stems| 8 -12| Until it Is thawed completely
BREAD / PASTRIES| STORING TIME
(MONTHS)| THAWING TIME IN ROOM
TEMPERATURE (HOURS)| I THAWING
TIME IN OVEN
(MINUTES)
---|---|---|---
Bread| 4- 6| 2- 3| 4- 5 (220-225°C)
Biscuits| 3- 6| 1 – 2| 5-8(190-200°C)
Pastry| 1 – 3| 2- 3| 5-10(220-225°C)
Pie| 1 – 2| 3 – 4| 5 – 8 (190-200t)
Filo dough| 2- 3| 1 – 2| 5-8(190-200°C)
PLua| 2 – 3| 2 – 4| 15 – 20 (220°C)

TECHNICAL FICHE

31 It 2 stars (**)
Energy consumption| kWh / year| 1,192
Energy consumption| | 435
Energy class| KG / 24h| A++
Freezing capacity| | 13
Defrost system type Fridge/Freezer| | Automatic
Refrigerating gas| | R600a
Refrigerating gas quantity| gr| 75 / 45
Power| W| 430
Defrost heat power| W| 380
Current| A| 2,8
Refrigeration system| | No – Frost
Built under| | No
Built in| | Yes
Electronic control| | Yes
Condenser type| | Air forced wire tube condensers
Blowing agent for insulation| | C-Pentane
Air flow type Fridge / Freezer| | orced / Forced
Temperature rise time (18oC to -9oC)| mins| 820
Thermostat| | 7 sensors
Freezer| | Left
Cooling| | No frost
Control| | Digital inverter
Chiller| | No
Waste dispenser| | No
Split| | Yes
Condenser| | Top
Ice Tray| | Yes
Hygiene features| | Water filter
Dimensions| cm| H212 x W121 x D71
(66 without handle)

CARE AND MAINTENANCE

CLEANING
Interior surfaces and removable parts can be cleaned using a mild solution of soap and lukewarm water. Do not use abrasive products or detergents. After washing, rinse with clean water and dry carefully. While cleaning, avoid getting water on the lights and display panels.
For cleaning the stainless steel exterior, you can use a soft, non-abrasive stainless steel cleaner.
By using a dry polishing chamois with a water-dampened microfibre cloth, you can bring out the natural luster of the stainless steel. Better results are obtained by keeping the cloth in continuous contact with the stainless steel.
IMPORTANT:
Before you start cleaning, be sure to disconnect the unit from the power supply.
IMPORTANT:
Do not submerge or pour hot water over cold glass shelves.
LIGHTING INFORMATION
In both the freezer and refrigerator compartments, LED lights are used for illumination. In the upper refrigerator and freezer compartment, the locations of the led lights are on the ceiling and side walls. For drawers, their positions are only on the ceiling.
When the door is closed, the refrigerator lights remain on, which provides improved visibility and easy access. The interior light can be turned on/off via the control panel.

INSTALLATION GUIDE

It is important that the installation is done by a qualified installer. Caple can not be held responsible for any defects caused by an incorrect installation. This manual is prepared for an easier, problem-free, and most importantly safe installation process. Before beginning installation, it is strongly recommended to read this installation guide carefully and entirely.
Any problems or questions you might have about the installation process, please contact Caple customer service. Important product information, such as the model and a serial number of the unit is listed on the rating label. This is located on the left wall of the top cooler drawer compartment. To access it please open the top cooler drawer and remove the basket. See the illustration below BEFORE STARTING INSTALLATION
The CAFF60 could be installed in two different types. As built-in or free- standing. Some parts are optional according to installation type. Before the installation process, please make sure that the prerequisites are provided. Such as; electrical connections, water supply, etc. Please check the technical fiche for more information.
TOOLS & MATERIALS

• Dolly or an appropriate lift (Able To Support 400 Kg)
• 13 mm Socket Wrench and Open End Wrench
• Phillips Head Screwdriver
• M4 Allen Wrench
• Flat Head Screwdriver
• Drill with 6 mm concrete drill bit (for free-standing installations)
• Tubing Cutter
• Lathe® 270 (included in the package)

PREREQUISITES FOR INSTALLATION
OPENING DIMENSIONS
Standard and flush built-in installations

OVERALL DIMENSIONS

ELECTRICAL REQUIREMENTS
The power outlet must be inside the area shown in the picture below. When installing plug, you should follow the National Electrical code and local codes and regulations.
CAUTION:
To ensure that the outlet is properly wired. Polarity should be checked by a qualified electrician. Make sure the outlet is properly grounded.
WARNING:
Do not use an extension flex or plug
WARNING:
In any installation, service or maintenance please turn off the power from the mains.

ELECTRICAL REQUIREMENTS

Power supply| 220 – 240 V AC, 50 Hz
Plug type| 3 pin

PLUMBING REQUIREMENTS
The CAFF60 is able to produce ice via an automatic ice maker system with an integrated water filtration system. To supply water to the ice maker, the water line must be arranged in the shown area before installation. Constant water pressure from 240000 Pa (35 psi) up to 830000 Pa (120 psi) is sufficient for the ice maker system. The water filtration system is described further on.
IMPORTANT NOTE:
The system should not be used with water that is microbiologically unsafe or with unknown water quality
The instructions for appliances connected to the water mains shall state

• The maximum inlet water pressure, in pascals;
• The minimum inlet water pressure, in pascals, if this is necessary for the correct operation of the appliance.
  The instructions for appliances connected to the water mains by detachable hose sets shall state that the new hose-sets supplied with the appliance are to be used and that old hose sets should not be reused.

PLUMBING REQUIREMENTS

Water supply line| ¼” PEX tubing
Water pressure| 2.4 – 8.3 bar(35-120 psi)
Excess water line for connections| 1000mm

IMPORTANT NOTE:
It is strongly suggested that the refrigerator should be tilted to its left side (freezer side) while carrying but only if necessary. If for any reason the unit has to be tilted the unit must stand upright for a minimum of 24 hours before connecting to power.
IMPORTANT NOTE:
Due to the refrigerator being heavy caution should be taken to ensure the unit is moved and placed with adequate human power.
POSITION THE UNIT
Please make sure all electrical and plumbing requirements are done, before placing the unit.
IMPORTANT NOTE:
Make sure the rear levelers are in their lowest position while setting the refrigerator in its place. Leveling should not be completed until the unit is in the desired position.
LEVELLING THE UNIT
After positioning has been done, leveling should be done for proper placing. When the unit is properly leveled, door and drawer adjustments are less likely to be changed from the factory default settings. Firstly rear adjustment should be done using a 13mm socket wrench. Turn the bolt clockwise to raise the unit or counterclockwise to lower it. Refer to the picture below for the position of the rear roller base adjustment.
IMPORTANT NOTE:
The floor can be a reference for leveling, and not surrounding cabinetry. This could have an influence on the operation of the unit, such as door closing or drawer closing. The front leveling legs could be adjusted by turning them counterclockwise.

To avoid of the unit tipping forward, the front leveling legs should touch
WARNING:
To avoid the unit tipping forward, the front leveling legs should touch the floor.
ANTI-TIP BRACKET INSTALLATION
For safety precautions, it is important to fix the system to the surroundings to prevent tipping over. There are two different methods that can be applied free-standing type and built-in type.
The content of fixating elements in the anti-tip package includes two types of installation.

Content of Anti-tip package;
» Fixing Pin  – 4 pieces
» 2mm String  – 8 pieces
» Lag Screw (D4X20) – 4 pieces
» L type Bracket – 2 pieces
» Screw (M5X16) – 2 pieces
» Plastic Wall Plug – 4 pieces
» Lag Screw (D4X35) – 4 pieces

All components will not be necessary for each installation.

FREESTANDING INSTALLATION
L-type brackets and joints are used in this installation type. The sequence of assembly and installation drawings is located below.

• Place the refrigerator in the appropriate position.
• The unit should be pushed until the back side touches the wall.
• L type brackets and the rivet nuts are fastened with an M5 screw which is located on the top of the refrigerator.
• Mark the wall through the holes of L type bracket and move the bracket.
• Make a hole on the wall at appropriate points with a 6 mm drill and put the pegs in the wall.
• Fasten the L-type bracket to the wall with D4X35 Lag Screws.

FREE-STANDING INSTALLATION
BUILT-IN INSTALLATIO N
Fixing pins and the joints are used in the built-in installation version. The sequence of the assembly and installation drawing are located below.

• Place the refrigerator in furniture which is built in special dimensions.
• Open the upper compartment cover.
• Put the fixed pins in appropriate holes and use the washers for tolerating gaps.
• Fasten the fixing pins to the furniture using D4X20 Screw.

BUILT-IN INSTALLATION

Be sure the leveling is correct before screwing.
IMPORTANT NOTE:
Be sure the leveling is correctly done correctly before screwing.
WATER LINE CONNECTION
¼‘’ mm plastic tubing is connected to the ice maker with a pre-assembled ¼ ‘’ check valve
connection at the end of the tube. The check valve is located behind the kick plate.
First, PEX tubing must be cut evenly using tubing cutters for even cuts to eliminate any leakages. Next, safety clips should be removed from the open end of the check valve. Then the tubing must be inserted firmly into the check valve. Finally, safety clips should be inserted onto the check valve again.
To prevent leaks, all connections should be checked.
IMPORTANT NOTE:
Before making any connection please make sure the water tubing is clean, using some water to remove debris that may be present in the tube.

IMPORTANT NOTE:
The water filtration system can be bypassed by removing the filter in case a reverse osmosis system or any in-house filtration is used. The filter housing has an automated bypass system.
DRAINAGE TRAY ASSEMBLY
Remove the tray from the box and placed in the bottle tray of the refrigerator. Hold the tray from one positioning side and push it towards the sheet bracket. Place the positioning side on the bracket. Lean the other positioning side to the leaf spring. Raise the tray carefully without losing the adjacency of positioning the side to the leaf spring.
IMPORTANT NOTE:
Be sure the tray has been placed both on the bracket and the leaf spring.
View from beneath the fridge: INSTALLING KICKPLATE
Before installing the kickplate, make sure to put the drain pan back in its original position. The slots on the kickplate should be aligned with the poles. Push the kickplate firmly onto the poles until hearing a “click” sound or until the surface of the kickplate and the main frame are aligned. Please see the illustration below. The clips must be placed one by one for an easier and more convenient installation. An excessive force can damage the kickplate.
IMPORTANT NOTE:
The kickplate must be removable for service. Take caution accordingly.

DOOR HANDLE INSTALLATION
The door handle pins must be screwed tightly with a drop of Loctite® 270 on the tooth of the pins. The door handles should be placed and tightened with setscrews on them. This process should be done for both the doors and drawer handles. While processing, be careful not to hit the surface of the refrigerator. The doors can open up to an angle of 120o.
WARNING: The surface which has setscrew holes for the drawer handle must face down. DRAWER ADJUSTMENT
After installation is completed, if drawers are not aligned, they can be adjusted horizontally or vertically with the help of the adjustment area. The adjustment area is behind the basket. This area is accessible by removing the basket. To shift the horizon tally, change the position of screws in the middle slots. To shift vertically, change the position of screws in the outer slots. Each slot can shift by 2 mm. Since the  holes on the doors are shifted to meet to align only one slot at a time. Please see the illustration below. OPTIONAL ACCESSORIES
SIDE PANELS For free-standing installations, stainless steel side panels are available as optional extras through Caple.
Side panels are installed using special screws and shims supplied with the side panels. First, lift the side panel up a little. Push and align the side panel to the side of the fridge’s frame. When aligned pull down the side panel gently till it settles. Refer to the illustration below.
IMPORTANT NOTE:
Side panels are optional.
WATER FILTRATION SYSTEM
WATER FILTER BYPASS MODE Water filter is taped at the back of the top cover. After installation is completed, please insert the cartridge to the filter housing and then turn it clockwise.
If water filtration is not necessary, the water filter cartridge can be removed or not be installed in the first place. Thus the system can be operated in bypass mode. In this mode, water will be supplied to the ice maker without filtration. Lift the top cover to access the water filter cartridge. To lift the cover, pull out on the bottom edge of the cover and tilt the cover frame forward. See the illustration below.
It is advised to put a towel under the water filter cartridge since there is pressure and excess water in the filter. Unfortunately, there will be a small amount of water spilling out.
To separate the water filter cartridge, rotate it one-quarter turn counterclockwise. Please twist the base of the cartridge slowly to release. Do not pull. See to the illustration.
If the filter cartridge is removed, bypass mode will be activated automatically. SERVICE INFORMATION
A sophisticated control and data logging system are integrated into the CAFF60. If any malfunction occurs it is wise to contact Caple service. The information kept in the data logger will be used to find and analyze the cause of the malfunction in order to find a pinpoint solution to fix the unit.
INSTALLATION CHECKLIST
To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked.
» Have all packing materials been removed?
» Is the water supply line connected and not leaking? Is the water supply turned on and icemaker control on?
» Have the anti-tip brackets been installed securely and properly engaging the unit?
» Is the unit leveled properly on a solid, level floor?
» Has the drain pan and kickplate been installed?
» Are panels attached securely and properly aligned? (in free-standing type)
» Are the door(s) aligned for proper appearance and operation?
» Has the water filter cartridge been removed (for homes with a reverse osmosis system)?
» Are all the doors aligned smoothly?
NOTES:

apple Service Fourth Way Avonmouth Bristol
BS11 8DW
T: 0117 938 1900
E: service@caple.co.uk
www.caple.co.uk 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>