MEAN WELL HLG-120H-C Series 150W Constant Current Mode LED Driver Owner’s Manual

: June 14, 2024
: MEAN WELL

Table of Contents

HLG-120H-C Series 150W Constant Current Mode LED Driver
Product Information:
Product Usage Instructions:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HLG-120H-C Series 150W Constant Current Mode LED Driver

Product Information:

Model| Rated Current| Rated Power| Constant Current Region| Output Current Adj. Range| Current Ripple Current Tolerance| Set Up Time| Voltage Range| Frequency Range| Power Factor (Typ.)| Total Harmonic Distortion THD| Efficiency (Typ.)| AC Current (Typ.)| Inrush Current (Typ.)| Cold Start| Max. No. of PSUs on 16A Circuit Breaker| Leakage Current
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
HLG-120H-C350| 350mA| 150.5W| 215 ~ 430V| Adjustable for A/AB-Type only (via built-in potentiometer)| 175 ~ 350mA| 1000ms / 115VAC 500ms / 230VAC| 90 ~ 305VAC 127 ~ 431VDC (Please refer to STATIC CHARACTERISTIC
section)| 47 ~ 63Hz| PF0.98/115VAC, PF0.96/230VAC, PF0.93/277VAC @full load (Please
refer to POWER FACTOR (PF) CHARACTERISTIC section)| THD < 20% (@ load50% /115VAC, 230VAC; @ load75%/277VAC)
(Please refer to TOTAL HARMONIC DISTORTION (THD) section)| 94%| 1.6A / 115VAC| 0.8 A / 230VAC| Cold Start 50A(twidth=600s measured at 50% Ipeak) at 230VAC;
Per NEMA 410| 4 units (circuit breaker of type B) / 6 units (circuit breaker
of type C) at 230VAC|
HLG-120H-C500| 500mA| 150W| 150V ~ 300V| Adjustable for A/AB-Type only (via built-in potentiometer)| 250 ~ 500mA| 1000ms / 115VAC 500ms / 230VAC| 90 ~ 305VAC 127 ~ 431VDC (Please refer to STATIC CHARACTERISTIC
section)| 47 ~ 63Hz| PF0.98/115VAC, PF0.96/230VAC, PF0.93/277VAC @full load (Please
refer to POWER FACTOR (PF) CHARACTERISTIC section)| THD < 20% (@ load50% /115VAC, 230VAC; @ load75%/277VAC)
(Please refer to TOTAL HARMONIC DISTORTION (THD) section)| 94%| 1.6A / 115VAC| 0.8 A / 230VAC| Cold Start 50A(twidth=600s measured at 50% Ipeak) at 230VAC;
Per NEMA 410| 4 units (circuit breaker of type B) / 6 units (circuit breaker
of type C) at 230VAC|
HLG-120H-C700| 700mA| 150.5W| 107V ~ 215V| Adjustable for A/AB-Type only (via built-in potentiometer)| 350 ~ 700mA| 1000ms / 115VAC 500ms / 230VAC| 90 ~ 305VAC 127 ~ 431VDC (Please refer to STATIC CHARACTERISTIC
section)| 47 ~ 63Hz| PF0.98/115VAC, PF0.96/230VAC, PF0.93/277VAC @full load (Please
refer to POWER FACTOR (PF) CHARACTERISTIC section)| THD < 20% (@ load50% /115VAC, 230VAC; @ load75%/277VAC)
(Please refer to TOTAL HARMONIC DISTORTION (THD) section)| 94%| 1.6A / 115VAC| 0.8 A / 230VAC| Cold Start 50A(twidth=600s measured at 50% Ipeak) at 230VAC;
Per NEMA 410| 4 units (circuit breaker of type B) / 6 units (circuit breaker
of type C) at 230VAC|
HLG-120H-C1050| 1050mA| 155.4W| 74V ~ 148V| Adjustable for A/AB-Type only (via built-in potentiometer)| 525 ~ 1050mA| 1000ms / 115VAC 500ms / 230VAC| 90 ~ 305VAC 127 ~ 431VDC (Please refer to STATIC CHARACTERISTIC
section)| 47 ~ 63Hz| PF0.98/115VAC, PF0.96/230VAC, PF0.93/277VAC @full load (Please
refer to POWER FACTOR (PF) CHARACTERISTIC section)| THD < 20% (@ load50% /115VAC, 230VAC; @ load75%/277VAC)
(Please refer to TOTAL HARMONIC DISTORTION (THD) section)| 94%| 1.6A / 115VAC| 0.8 A / 230VAC| Cold Start 50A(twidth=600s measured at 50% Ipeak) at 230VAC;
Per NEMA 410| 4 units (circuit breaker of type B) / 6 units (circuit breaker
of type C) at 230VAC|
HLG-120H-C1400| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A| N/A

Product Usage Instructions:

To use the HLG-120H-C series 150W Constant Current Mode LED
Driver, please follow these instructions:

Choose the appropriate model based on your requirements
(HLG-120H-C350, HLG-120H-C500, HLG-120H-C700, or
HLG-120H-C1050).
Ensure that the input voltage falls within the specified
voltage range (90 ~ 305VAC).
Connect the LED driver to the LED light source, ensuring that
the output current is within the specified constant current region
for the chosen model.
If using an A/AB-Type LED driver, adjust the output current
within the adjustable range using the built-in potentiometer.
Refer to the STATIC CHARACTERISTIC section for more information
on voltage range.
Refer to the POWER FACTOR (PF) CHARACTERISTIC section for
information on power factor at full load.
Refer to the TOTAL HARMONIC DISTORTION (THD) section for
information on total harmonic distortion.
Ensure that the AC current and inrush current are within the
specified limits.
Refer to the COLD START section for

150W Constant Current Mode LED Driver

HLG-120H-C series
User’s Manual

IP65 IP67

~

A

I

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver

HLG-120H-C series

SPECIFICATION

MODEL

HLG-120H-C350

HLG-120H-C500

HLG-120H-C700

HLG-120H-C1050

HLG-120H-C1400

RATED CURRENT

350mA

500mA

700mA

1050mA

RATED POWER

150.5W

150W

150.5W

155.4W

CONSTANT CURRENT REGION Note.2 215 ~ 430V

150V ~ 300V

107V ~ 215V

74V ~ 148V

OUTPUT CURRENT ADJ. RANGE

Adjustable for A/AB-Type only (via built-in potentiometer)

175 ~ 350mA

250 ~ 500mA

350 ~ 700mA

525 ~ 1050mA

CURRENT RIPPLE CURRENT TOLERANCE

8.0% max. @rated current ±5%

SET UP TIME

Note.4 1000ms / 115VAC 500ms / 230VAC

VOLTAGE RANGE

Note.3

90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

PF0.98/115VAC, PF0.96/230VAC, PF0.93/277VAC @full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

INPUT

TOTAL HARMONIC DISTORTION THD< 20% (@ load50% /115VAC, 230VAC; @ load75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)

EFFICIENCY (Typ.)

94%

AC CURRENT (Typ.) INRUSH CURRENT(Typ.)

1.6A / 115VAC

0.8 A / 230VAC

0.7A / 277VAC

COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

SHORT CIRCUIT PROTECTION OVER VOLTAGE

Constant current limiting, recovers automatically after fault condition is removed

475 ~ 495V

335 ~ 355V

240 ~ 260V

165 ~ 175V

Shut down o/p voltage with auto-recovery or re-power on to recovery

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

WORKING TEMP. MAX. CASE TEMP.

Tcase=-40 ~ +90(Please refer to “OUTPUT LOAD vs TEMPERATURE” section) Tcase=+90

WORKING HUMIDITY ENVIRONMENT
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT

10 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 50)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

1400mA 151.2W 54V ~ 108V 700 ~ 1400mA
93.5%
120 ~ 130V

SAFETY STANDARDS

Note.6

UL8750, CSA C22.2 No. 250.13-12, BS EN/EN/AS/NZS 61347-1, BS EN/EN/AS/NZS 61347-2-13, BS EN/EN62384 independent,GB19510.1, GB19510.14, IP65 or IP67, J61347-1, J61347-2-13(for A type only), EAC TP TC 004 approved

SAFETY & EMC

WITHSTAND VOLTAGE ISOLATION RESISTANCE

EMC EMISSION

Note.6

EMC IMMUNITY

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load50%) ; BS EN/EN61000-3-3,GB17743 and GB17625.1, EAC TP TC 020
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020

MTBF

2456.4K hrs min. Telcordia SR-332 (Bellcore) ; 191.1K hrs min. MIL-HDBK-217F (25)

OTHERS DIMENSION

2206838.8mm (LWH)

NOTE

PACKING

1.04Kg; 12pcs/13.5Kg/0.8CUFT

Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver
BLOCK DIAGRAM

HLG-120H-C series
PFC fosc : 70KHz PWM fosc : 60KHz

EMI FILTER

I/P

&

RECTIFIERS

FG

PFC CIRCUIT

POWER SWITCHING

O.T.P.

O.L.P.

PWM & PFC CONTROL

RECTIFIERS &
FILTER

O.L.P.
DETECTION CIRCUIT
O.V.P.

+V
-V
DIM+ DIM(B Type)

DRIVING METHODS OF LED MODULE
This series works in constant current mode to directly drive the LEDs.

In the constant current region, the highest voltage at the output of the driver

100

depends on the configuration of the end systems.

Should there be any compatibility issues, please contact MEAN WELL.

Constant Current region

Vo(%)

50

100

Io (%)

Typical output current normalized by rated current (%)

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver
DIMMING OPERATION

HLG-120H-C series

FG (Green/Yellow)
AC/L(Brown) AC/N(Blue)

HLG-120H-C B Type

DIM+(Purple) DIM-(Pink)
-V(Blue) +V(Brown)

3 in 1 dimming function (for B/AB-Type)

Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)

Applying additive 1 ~ 10VDC

100%

90%

Output current (%)

+V +

80%

70%

-V

–

DIM+ +

Additive Voltage DIM-

“DO NOT connect “DIM- to -V”

60% 50% 40% 30% 20% 10%
1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage

Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

+V +

-V

–

DIM+

Additive PWM signal DIM-

“DO NOT connect “DIM- to -V”

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input

Applying additive resistance:

+V +

-V

–

DIM+

Additive Resistance DIM-

“DO NOT connect “DIM- to -V”

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation) Dimming input: Additive resistance

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver

HLG-120H-C series

Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.

N FG L

Relay

Switch

Adjuster

10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal

Green/ Yellow
Brown
Blue

AC/L AC/N

HLG-120H-C B-Type

DIM+ DIM-
V(-) V(+)

Purple
Pink Blue Brown

LED Lighting Fixture

Using a switch and relay can turn ON/OFF the lighting fixture.

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

LOAD (%)

150W Constant Current Mode LED Driver
OUTPUT LOAD vs TEMPERATURE(Note.8)

HLG-120H-C series

PF LOAD (%)

100 80 60 40 20

-40 -20 -10

0

15

30

50

60

AMBIENT TEMPERATURE,Ta ()

70 (HORIZONTAL)

100 80 60 40 20

-40 -20

0

25

35

45

60

75

90 (HORIZONTAL)

Tcase ()

STATIC CHARACTERISTIC
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz

POWER FACTOR (PF) CHARACTERISTIC
Tcase at 80

1 0 .9 8 0 .9 6 0 .9 4 0 .9 2
0 .9 0 .8 8 0 .8 6 0 .8 4
50%

60%

70%

80%

LOAD

90%

100%

(150W)

277V 230V 115V

TOTAL HARMONIC DISTORTION (THD)
700mA Model, Tcase at 80

EFFICIENCY vs LOAD
HLG-120H-C series possess superior working efficiency that up to 94% can be reached in field applications. 700mA Model, Tcase at 80

25

20

15

277VAC

10

230VAC

115VAC 5

0

50%

60%

70%

80%

90%

100%

EFFICIENCY(%)

95 92 89 86 83 80 77 74
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V 230V 115V

LOAD

LOAD (%)

THD(%)

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver
LIFE TIME

HLG-120H-C series

LIFETIME(Kh)

120

100

80

60

40

20

0

20

30

40

50

60

70

80

90

Tcase ( )

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver
MECHANICAL SPECIFICATION
A-Type

HLG-120H-C series
Case No.994 Unit:mm

9.4 34.2 9.4 68
34

220

12

196

9.6

300±20

FG (Green/Yellow)

AC/L(Brown)

tc

AC/N(Blue) SJOW 17AWG×3C& H05RN- F 3×1. 0mm²

tc : Max. Case Temperature

Io ADJ.

98

300±20

-V(Blue) SOOW 17AWG×2C&H07RN-F 2×1.0mm²+V(Brown)
(for HLG-120H-C350) SJOW 17AWG×2C&H05RN-F 2×1.0mm²(for others) 4.2×4PL

38.8

B-Type
12 9.6
300±20 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG×3C& H05RN- F 3×1. 0mm²

220 196

tc

98

9.4 34.2 9.4 68
34

tc : Max. Case Temperature

300±20 SJOW 17AWG×2C&H05RN-F 2×1.0mm²

DIM+(Purple) DIM-(Pink)

-V(Blue) SOOW 17AWG×2C&H07RN-F 2×1.0mm² +V(Brown)
(for HLG-120H-C350) SJ4O.W2×174APWLG×2C&H05RN-F 2×1.0mm²(for others)

38.8

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver

HLG-120H-C series

AB-Type

220

12

196

9.6

300±20

FG (Green/Yellow)

AC/L(Brown)

tc

AC/N(Blue) SJOW 17AWG×3C& H05RN- F 3×1. 0mm²

9.4 34.2 9.4 68
34

tc : Max. Case Temperature

Io

300±20

ADJ. SJOW 17AWG×2C&H05RN-F 2×1.0mm²

98

DIM+(Purple) DIM-(Pink)

-V(Blue) SOOW 17AWG×2C&H07RN-F 2×1.0mm² +V(Brown)
(for HLG-120H-C350) SJOW 17AWG×2C&H05RN-F 2×1.0mm²(for others) 4.2×4PL

38.8

D-Type

12 9.6

FG (Green/Yellow)

300±20

AC/L(Brown)

AC/N(Blue) SJOW 17AWG×3C& H05RN- F 3×1. 0mm²

220 196

tc

98

9.4 34.2 9.4 68
34

tc : Max. Case Temperature

300±20
-V(Blue) SOOW 17AWG×2C&H07RN-F 2×1.0mm²+V(Brown)
(for HLG-120H-C350) SJOW 17AWG×2C&H05RN-F 2×1.0mm²(for others) 4.2×4PL

38.8

Downloaded from Arrow.com.

File Name:HLG-120H-C-SPEC 2022-05-30

150W Constant Current Mode LED Driver

HLG-120H-C series

WATERPROOF CONNECTION
Waterproof connector Waterproof connector can be assembled on the output cable of HLG-120H-C to operate in dry/wet/damp or outdoor environment.

AC source

I/P

HLG-120H-C

O/P

Size

Pin Configuration (Female)

Size

Pin Configuration (Female)

M12
Order No. Suitable Current

4-PIN 5A/PIN M12-04 10A max.

Cable Joiner

66 26 20