KuccHero L12 Outdoor Bluetooth Speaker with Lights User Guide

KuccHero L12 Outdoor Bluetooth Speaker with Lights User Guide

To connect two or more TORCH LIGHT speakers for 360° stereo sound, please refer to the following instructions:

IMPORTANT:

• Before synchronizing your speakers, please ensure all speakers are powered off. (Use your Bluetooth device’s Bluetooth settings to remove all previously paired TORCH LIGHT Bluetooth speakers if you have paired them.)
• Turmn on and operate your speakers in the following order. When connecting the first speaker (Primary speaker), please ensure other speakers are powered off.

1. Long press button on the 1stspeaker to tum it on and get it paired with your Bluetooth device.  And lable this speaker as the Primary speaker.
   
   the other speaker should be power off

2. Double-press(Short press twice in one second) 28 button on the 1stspeaker to enter the multi-sync mode to pair more speakers.

3. On the 2nd speaker(Secondary speaker), long press  button to power on and double-press button to enter the multi-sync mode to get it paired with the 1stspeaker.

4. Wait until you hear “Synced” (It usually takes D)  about 5 seconds.) Then the 1stspeaker and the 2nd speaker are synchronized and you can play music in perfect sync.

5. Repeat Step 3 for each additional speaker you want to pair.
   

Encable the Memory Mode

• Once Primary Speaker and Secondary Speakers are successfully paired and synced in Multi-Sync mode, all the speakers will memorize the multi pairing settings.
• If you need to use these speakers the next time, first turn on the Primary Speaker. and then turn on Secondary Speakers one by one (No need to press the Bluetooth button) and your Primary Speaker will automatically reconnect to your Bluetooth device. The other Secondary Speakers will automatically enter the Multi-Sync mode and sync music playback with the Primary Speaker.

If you want the speakers to keep the sync settings so you don’t have to repeat the synchronization processes the next time, you can do it In this way:

Put all speakers into Standby Mode

1. Short press the power button of the primary unit, and you will hear the prompt
sound “standby”. At this time, both the primary unit and the secondary units will enter
the Standby Mode, then all the indicators will go off.
2. Short press the power button of the primary unit again. When you hear the prompt
sound “awake”, you can re-enter the multi-sync mode and the indicators will go on.

Note: The speakers will consume a small amount of power in Standby Mode.

FAQ: Speakers Won’t Sync Up

Try the following steps:

Long press the Bluetooth button on the secondary speaker until it emits a voice prompt “Bluetooth disconnected”, then short press the Bluetooth button re-enter the multi-sync mode. Wait until you hear the voice prompt “synced”.

OR

Reset the speaker by pressing and hold the Play/Pause Button for 8 seconds. Forget all the previously connected Bluetooth devices named “TORCH LIGHT” on your phone, and follow the steps in the instructional video.

Any more problem, please feel free to contact us.

Documents / Resources

| KuccHero L12 Outdoor Bluetooth Speaker with Lights [pdf] User Guide
L12 Outdoor Bluetooth Speaker with Lights, L12, Outdoor Bluetooth Speaker with Lights, Bluetooth Speaker with Lights, Speaker with Lights
---|---
| KuccHero L12 Outdoor Bluetooth Speaker with Lights [pdf] User Manual
L12 Outdoor Bluetooth Speaker with Lights, L12, Outdoor Bluetooth Speaker with Lights, Bluetooth Speaker with Lights, Speaker with Lights

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>