Mingtawn T17 Smart Watch for Men Women Android Phone and iOS Instructions
- June 14, 2024
- Mingtawn
Table of Contents
Mingtawn T17 Smart Watch for Men Women Android Phone and iOS
Product Information
The T17 smartwatch is a versatile device that offers various features and functions to enhance your daily activities. It is designed to be easy to use and provides convenience on the go. Here are some frequently asked questions and answers to help you better understand and utilize the product.
Q1: What should I do if the product does not turn on?
For first-time use, please charge the product for 3-4 hours until it is
fully charged. The product will turn on by itself during charging. If the
power is too low, the product will automatically turn off and cannot be turned
on. Please charge the product, and it will automatically turn on after
charging for a certain period of time. (The smartwatch requires a certain
amount of power to be able to turn on and use.)
**Q2: What should I do if I can’t download the APP?
-
Download Method 1: Scan the QR code corresponding to the manual to download according to your cell phone system.
-
Download Method 2: For Android phones, search and download by entering your phone name in Google Play or App Store. For Apple phones, enter the name of the app in App Store to search and download.
-
Phone system version requirements: iOS 8.0 and above, Android 4.4 and above.
- (Note: Too old versions of phones and systems may not be able to connect.)
Q3: Explanation of Bluetooth not connected or unable to connect
operation
Please try the following steps
- Press the device button to check if the screen lights up. If not, connect the device to the charger for charging to ensure there is enough power.
- Restart the watch and try reconnecting.
- Restart your phone’s Bluetooth and try connecting again.
- Check if your phone is connected to other Bluetooth devices. If so, disconnect those devices and try reconnecting.
- If the device is connected to another cell phone, turn off or unbind the Bluetooth of that cell phone first, then use the current cell phone to search and bind.
- If the watch goes into sleep mode when not in use and doesn’t automatically reconnect after hibernation, open the mobile app “Glory Fit” and refresh it to automatically connect.
- If all else fails, uninstall the Glory Fit app, restore the watch to its factory settings, download the app again, Andre connect.
Q4: How do I get notifications on my watch?
Please follow these steps
- Make sure you have allowed app notifications in your phone settings.
- After connecting, open the app and tap on “Message Notification”. Select the notifications you want to receive, such as phone calls, SMS, Facebook, or Twitter.
- Ensure that the app allows reading notifications; otherwise, you will not receive message notifications.
Q5: The watch can’t answer the call, how to solve it?
If the audio Bluetooth is not connected, the watch will not respond to
incoming calls. Make sure to allow all permissions when connecting, and the
audio Bluetooth will connect automatically. Once connected, you can answer
incoming calls.
Q6: Why can’t I make and receive calls on my watch after connecting to my
phone?
After the watch is connected to the mobile phone through the app, it also
needs to be connected to the mobile phone via Bluetooth. When connecting the
watch to the mobile phone through the app for the first time, the app will
prompt you to connect to the Bluetooth of the mobile phone. Subsequent
connections will not be prompted, but sometimes you may need to manually
connect to the phone’s Bluetooth.
FAQ for T17 smartwatch
Thank you for purchasing our products! The following product description is to enable you to better use the product, if you encounter other problems that can not be solved, please contact us through your purchase, we will help you solve the problem as soon as possible.
Q1 : What should I do if the product does not turn on?
For first time use, please charge the product for 3 4 hours until it is
fully charged, the product will turn on by itself during charging. When the
power is too low, the product will automatically turn off and can not be
turned on, please charge the product, it will automatically turn on after
charging for a certain period of time. (The smart watch needs a certain amount
of power to be able to turn on and use)
Q2 : What should I do if I can’t download the APP?
- Download Method 1: Scan the QR code corresponding to the manual to download according to your cell phone system.
- Download method 2 :Android phone search and download by entering your phone name in Google Play or App Store. For Apple phone, enter the name of the app in App Sort to search and download.
- Phone system version requirements : IOS 8.0 and above, Android 4.4 and above
- ( Note: too old version of the phone and system will not be able to connect)
Q3 : Explanation of Bluetooth not connected or unable to connect operation
Please try to press the device button first, if the screen does not light
up, connect the device to the charger for charging to make sure there is
power.
- Please try restarting the watch and reconnecting.
- Please try restarting your phone’s Bluetooth and connecting again.
- Please confirm if your phone is connected to other Bluetooth devices. If so, please disconnect the other Bluetooth devices and reconnect.
- If the device is connected by another cell phone, turn off or unbind the Bluetooth of that cell phone first, then use the current cell phone to search and bind.
- After the watch is connected, it will go to sleep when not in use; When not automatically connected to the watch after hibernation, you need to open the mobile app “GloryFit” and refresh it to automatically connect
- Uninstall the “Glory Fit” app, restore the watch to its factory settings, download the app again, and connect
Q4 : How do I get notifications on my watch?
- Please make sure you have allowed APP notifications in your phone settings.
- After connecting, open the APP and tap “Message Notification”, select the notification you want to receive, such as phone call, SMS, Facebook or Twitter, etc.
- Please make sure APP allows to read notifications, otherwise you will not receive message notifications.
Q5 : The watch can’t answer the call, how to solve it?
- If the audio Bluetooth is not connected, it will not respond.
- Please allow all permissions when connecting, and the audio bluetooth will connect automatically.
- After connecting the audio bluetooth, you can answer the incoming call.
Q6 : Why can’t I make and receive calls on my watch after connecting to my phone?
- After the watch is connected to the mobile phone through the APP, it also needs to be connected to the mobile phone via Bluetooth.
- When the watch is connected to the mobile phone through the APP for the first time, the APP will prompt to connect to the Bluetooth of the mobile phone. Subsequent connections will not be prompted, and sometimes you need to manually connect to the phone’s Bluetooth APP Bluetooth is used to synchronize messages and data, and audio Bluetooth (mobile phone Bluetooth) is used for calls and audio transmission. If you don’t need to transmit sound through your mobile phone, you can disconnect the audio Bluetooth and only keep the APP Bluetooth.
Q7 : Is the watch waterproof and can I take it swimming or bathing?
The watch has IP68 waterproof system, but it is better not to take it for
swimming or bathing. However, it is best not to take the watch swimming or
bathing, in order to prevent the product from getting into water and
malfunctioning.
Q8 : How do I change my watch dial?
- You can choose to replace the downloaded dial in the settings of your watch.
- In the connected state, open the application , click “Device”, you can find the dial settings, select your favorite dial, download and replace. You can also choose photo,customize dial.
Q9 : Do I need to turn on my cell phone Bluetooth all the time when I wear the device?
- Pedometer, sleep monitoring, heart rate detection, stopwatch, alarm clock, sedentary reminder function does not need to turn on Bluetooth all the time. You only need to wear the device when you workout, open the App after you finish the workout, the device and the phone will be connected automatically, and you can check the data after the synchronization is finished.
- Incoming call reminder, App notification reminder, find cell phone, find device and other functions, because the phone needs to keep connected with the device, so you need to turn on the Bluetooth of the phone all the time.
Q10 : How to synchronize data?
- When the phone Bluetooth is turned on, when you open the App, it will automatically connect to the device for data synchronization, or you can pull down the data list in the main interface of the App to synchronize manually.
- If the synchronization prompted by the connection failure, you can try the following methods firstly, you can pull down the main interface to manually synchronize the operation, if it is invalid, please close the App background process, and then re–enter the App.
- If you still can’t synchronize, please close and open the Bluetooth of your phone or restart your phone.
Q11 : Why there is no pedometer or the pedometer is not accurate？
- Principle : Step counting is calculated by using the gravity sensing chip to sense the swinging of the arm.
- Step counting instructions: bracelet and cell phone connection state 06:00 am — 18:00 pm time period: walking 10–15 steps to start counting, and cumulative update display Steps (bracelet and cell phone data automatically synchronized and updated)
Q12 : How to set the screen timeout duration?
- You can access the settings on the watch, select “Wake on Wrist Raise,” and then navigate to the brightness adjustment. There, you can choose a screen timeout duration of 5 seconds, 10 seconds, or 15 seconds. This way, the watch will not go into sleep mode too quickly.
Q13 : How to play music on the smartwatch?
- If you want to play music on the smartwatch, please make sure that your phone is not connected to any other headphones or Bluetooth devices. Also, ensure that the Bluetooth on your phone is connected to the smartwatch T17F.
- Then, swipe down on the smartwatch screen and open the “Call” icon to enable the Bluetooth function on the smartwatch. Only then can you use the music playback feature on the smartwatch.
Q14 : How can I sync my phone contacts to the smartwatch?
- You can go to the Bluetooth calling section in the app, click on “Sync Contacts,” manually add the contacts from your phone, and the smartwatch will then sync the contacts.
- When receiving calls, the smartwatch will also display the contact information.
- Simple explanation and display of commonly used functions (Bluetooth connection is required for some of the following functions)
- Dial selection: Tap the on button on the right side of the dial to enter the main dial page, then slide the dial to the right and select the call function to dial. The call function also allows you to view contacts and call records;
- Exercise detection function : when you run, it can test your running distance, time, step frequency, heart rate, help you record your every exercise, and detect your safety;
- Female health check : This function is only activated when gender selection is performed on the APP’s personal information
- Menu function selection : Right slide on the main interface to enter the menu interface.Find “Dials & Themes” in the “Settings” function to change the menu style;
- Message Alert : After connecting Bluetooth, when you receive a text message or information, the watch will prompt you to.
- Dial Replacement and Customized Dials : The first time you want to replace the dial, you need to connect Bluetooth, download the dial data from “GloryFit”, then you can replace the dial. If you need to change the customized dial, you can open the “Dial Settings” in “GloryFit” and import the customized picture, you can customize the dial.
- APP download: The QR code can be found in the watch settings menu — QR code, or you can scan the QR code in the manual to download it;
- Bluetooth call/Bluetooth music/voice assistant usage: To use these three functions, you need to pair and connect the watch with the mobile app “GloryFit”, and also connect to the mobile Bluetooth.
Warming tips
- Do not use in sauna, hot spring or other environments with corrosive liquid and hot steam, which will lead to product failure.
- To protect your skin health, please do not over tighten the strap when wearing the watch.
- The health measurement function of this watch is for reference only and cannot be recommended as a medical level.
- Our smartwatch is charged with low power ,please do not use fast charging