UNIQ PIXO Magnetic Stylus For iPad User Manual
- June 14, 2024
- UNIQ
Table of Contents
UNIQ PIXO Magnetic Stylus For iPad
Structure
How to use the stylus pen?
The stylus doesn’t need any specific app, just open the cap and use it
directly, it allows you to select small icons, click a small alphabet and give
you an accurate selection, just works like your fingers.
- Fiber Tip
- Disc Tip
How to change disc tips?
Solution 1
By Hands – Hold the Metal tube to pull the tip out directly
Attention!
Solution 2
Use tweezers –Grip the metal tube with tweezers and gently pull out the tip
(not the rubber joint)When replacing the disc tip, be sure to pull out the
metal tube part. Please read it before you use the stylus.
IMPORTANT INSTRUCTIONS
- DO NOT remove the plastic disc at the end of the tip, if you move the Disc, the fine tip won’t work.
- When you use this stylus, please make sure the disc is clean and then let the disc fully touch the screen.
- This stylus does not support palm rejection, please make sure your hands do not lie on the screen.
- If the stylus lags and can not write smoothly on the device, the reason would be that the device does not run properly, please restart the device or turn off other apps.
Cautions
-
Due to the material of the disc being conductive plastic, before using the stylus on your device, please make sure both the device screen and the disc are clean, dirt can catch onto the disc which may result in
reduced sensitivity, and in some cases may even scratch your screen. -
Normally our stylus won’t cause scratches on a touch screen, but we still suggest you use a screen protector on your device to protect the screen from any possible damage/scratches that may be caused by dirt on the disc/screen, damaged tips or defective products of low probability.
-
If you suspect that your disc has been damaged in any way, discontinue use. A damaged disc may scratch the screen. Please replace it with a new disc.
What if my stylus doesn’t work in the iPad’s apps?
Firstly, it is recommended to disconnect the Bluetooth connection of the
Apple/active pencil. Secondly, as the versions of iPad and Apple Pencil are
continuously upgraded, the versions of different APPs are upgraded. Therefore,
some apps require manual setup when using a stylus. The following are the
reference setup steps for some applications:
About Notes
Click the setting button next to the brush- turn on “Draw with Finger”.
About Goodnotes
Click “Stylus&Pam rejection” on the top right corner –Find “Smart Stylus”-and
choose “None”.
About Onenote
Click “Draw” in the middle top –Drawing Mode-turn on “Draw with Touch”.
About Sketchbook
Click “Setting” in the upper left corner –select “Preferences”–find “PEN
CONNECTION” –click “Pen” — “None”.
About Vectornator
Click “Settings” on the upper right -select”Input” — turn off “Draw only with
a pencil”
About Paper
Click on the pencil in the top right corner – choose “Draw”
About Mapnote
Uncheck the top right corner of the app directory – “Use Apple Pencil”
About Linea Sketch
Click on the top left corner “…” – setting – APPLE PENCIL- “Finger, when
pencil in use”- choose “Selected tool”
About Nebo
Click on the top right corner “…” — choose “advanced”- turn off use active pen
About Noteful
Click on the top right corner “..” — turn on “Draw with touch”
About Concepts
Click on setting – Stylus– Finger action- Use active tools
About Prodrafts
Click on the “+” in the top right corner – choose “More” – close “use only the
apple pencil”
About Painter
Click on the top right corner “…” options—settings -Gestures–Finger–Normal
About Notes Writer
Back to desktop – open iPad system settings – Bluetooth – disconnect the
active pen/ Or turn the active pen off, then restart the app
About Pages
Use the drawing function – Back to desktop – Open iPad system settings –
Bluetooth – Disconnect the active pen / Or turn the active pen off, then
restart the app
Other usage suggestions
If you need to use a more intelligent app [Such as: Kumon] for more advanced and refined artistic creation, we recommend using an active pen with palm rejection and tilt sensitivity function. Thanks for your purchase! We truly appreciate you choosing our product. We want to make sure that you are completely satisfied with your purchase. If you need assistance or there is any problem with the product. Please feel free to contact us on Amazon, we are always here to help!