iTORCH Flashlight User Manual

M3OR
USER MANUA L

M3OR is a tactical and normal illumination combined, high-output max 1800Iumen, 328-meter beam distance LED flashlight, holds a CREE XHP35 HD LED, powered by 1’18650 rechargeable battery, owns 4 illumination modes(Turbo-High- Medium-Low) and Strobe, SOS tactical function, 3 switches in the tail cap to trigger the strobe and turbo modes in one step, owns power detection and location beacon built-In, OTG power outlet as a portable bank for cell phones. designated for law enforcement, police, the military, the security officer, and so on.

Caution

• Turn on in *strobe” mode may cause seizures in persons with photosensitive epilepsy.
• When operated for a long time, it will get uncomfortably warm. This is NORMAL and is not a defact.
• Do not use a 16340 battery for this model.

Features

• CREE XHP35 HD LED, 50,000h life span
• 4 switches tactical &illumination modes Included
• Any time, tail cap tactical switches operate priority, one step action to shoot the target
• Tail cap tactical switch lock function
• New FCD rechargeable & chargeable function
• Integrated aluminum housing design assure LOGO and patterns inline
• Smart temperature control system
• Smooth brightness mode change
• Harmony breathing blink beacon
• Battery detection
• Low battery Indication
• Constant current circuit without flicker
• High-strength aerospace aluminum body, Mil-Spec hard-anodized for extreme durability
• Coated tempered resists impact glass In high light transmittance
• Metal filmed reflector to create a high-intensity beam

ANSI Chart

FL1 STANDARD| TURBO| HOME| MEDIUM| LOW| STROBE| SOS
---|---|---|---|---|---|---
OUTPUT| 1800LM| 460LM| 130LM| 20LM| 1800LM| 460LM
RUNTIME| 40mIn| 3.5h| 13h| 120h| |
INTENSIFY| 26.3000cd
DISTANCE| 328m Max)
WATERPROOF| IPX.8
IMPACT RESISTANCE| 2m

The above running time data tested on the Fitorch lab In regular ambient temperature, use 198650 3400mAh Li-on rechargeable battery, different batteries may get tolerance data when compares with it.

Specification

• LED: Cree XHP35 HD
• Input: DC2.751.48.00V
• Output: max 1800 lumen
• Reflector: precise metal filmed
• Glass: filmed mineral glass weight: 6.06 Ounces/169.8g (exclude battery)
• Material: HA-III military hard-anodized finish aluminum alloy
• Housing: Premium Type III hard-anodized anti-abrasive finish of black
• Switch: Side Switch and tail switch
• Powered: 1’18650 battery or 2•R123A
• Size: 1.44 Inches! 36.5mm, housing: 1.1 Inch / 28mnt Length: 6.26 inch/159mm
  Weight:6.06 Ounces /169.8g(exclude battery)

http://weixin.qq.com/r/5CouNufEd7oIraNV93-2

Shenzhen Fitorch Electronics Technology Co., Ltd
Office Address:6F. Longshen Commercial Building
Dalang St, Longhua new district
ShenZhen City. China
Tel: +86-755-2101-3606
Web: www.fitorchworld.com
E-ma II: [email protected]
CE RoHS ‘mat

Manual

• Battery Load: Insert the 1.18650 battery or 2’CR123A as illustrated.
• Tail Cap Tactical Switch Lock/Unlock

Twist the outer ring of the tail cap to align the mark of with the dot, lock, backward till the dot aligns with a mark of ‘, unlock.

• Side Switch Lock/Unlock  lock, when power off, press the side switch until torch’s LED bulb flickers, quick press the metal side switch in 3 times, unlock and power workflow mode) after power self-detection finished.
• On/Off : Hold and short press side switch power on, long press off.
• Tail Cap Tactical Action

The middle tail cap will trigger the turbo mode on in any time no matter the flashlight power on or not, click once turbo mode on, click and thumb release power off.

Press one of the side 2 switches and release, strobe mode will be active, long press and thumb release, the strobe will keep working on, short press strobe off.

• Mode change : when power on, short press the side switch, Turbo•High-Medium-Low-Medium-High-Turbo mode will be changed In cycle, quick press the side switch in twice, Strobe mode will be active, again SOS, then press the side switch once, back to normal illumination mode. when power off, press the side switch 1-3 seconds and hand release, the torch will jump to low mode.
• Power detection : quick tap the side switch in 3

times, the lamp under the side switch button will blink In Green and Red, one Green blink Indicates 1V, one Red blink Indicates In 0.1V, for Instance, 3.8V, 3 Green blinks and 8 red blinks.

• Location beacon : when power off, quick press the side switch 4 times, green breathing blink around the side switch will be active, press again back to normal illumination.
• Power recharging : lift the black rubber cap and connect the USB cable Included to the Micro USB port then Insert another end to the USB outlet as below guide, please note when the torch is recharging Ir USB cable, the lamp will blink In green and finally stay In green or lamp off status when battery full charged (only can use the low mode while recharging, press the side switch, power off).
• Charge mobile devices : connect the Micro USB por and USB convert OTG kit in the cable Included, then connect the power charge port of mobile devices such as cell phones, the torch can still work in MEDIUM or LOW modes while charging, press the side switch once or twice, power off, meanwhile, the lamp will blink In red &green.

Power Tips

• Low power warning, when voltage less 3.4V, slow red blinks, less 3.0V, quick Red blinks.
• This torch has a power auto-detection function, if battery capacity is less than 10% of the total, will jump on the lower brightness mode intelligently to avoid the battery over-discharge.

Accessories

• Standard: USB Cable, USB OTG kit, removable pocket clip. Lanyard, holster, spare waterproof ring and snap cap
• Optional: battery and recharger

Store and maintenance

• Disassembling the sealed head will damage the lights and void the warranty.
• High-quality batteries are recommended.
• 0-ring will be wear after a Long-term use, change it  In included spare one to maintain a water-tight seal.
• Unload the batteries if assure the torch won’t use a bit of long time, then better put It into Inner box.
• Store and keep the torch off fire, statics, steaming and humidity surroundings.
• Clean the body with soft fabric clothing then lubricate In silicon grease per half a year.
• Periodic cleaning of batteries contacts to improve the flashlight performance as dirty contacts cause the lamp flicking, shine intermittently or even fail to illuminate for the below factors.
• Battery needs replacing ( choose the battery which mentions on this manual)
• PCB, Spring or other contacts is dirty (clean the contacts In cotton swab In soaked rubbing alcohol)

Warranty

• Any problems happened 15 days after being sold, you can get a new replacement one from the local distributors or dealers.

Unwarrantable

• We provide 60 months( 5 years) warranty for free after sold out, over 60 months, only collect the cost of main parts for replacement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>