Roccat Torch User Manual and Driver

Torch  Streaming Device

Quick Install Guide

Download Driver

PACKAGE CONTAINS

1 = Studio-grade USB Microphone
2 = Torch Mixer Stand
3 = USB-C to USB-C !Desktop Usel -15cm
4 = Universal Boom Arm Adapter
5 = USB-C to USB-C !Boom Arm Usel -1.Bm
6 = USB-A to USB-C !Connect to PCJ – 2m
7 = Quick Start Guide

FEATURES

REAR BASE CONTROLS

PC SETUP

1. Connect the Torch base to your PC using the USB-C to USB-A cable
2. Connect the Torch base to the Torch Microphone using one of the USB-C cables
3. When Powered On, the microphone should automatically be selected as your input and output

If your device does not automatically connect:

1. Navigate to the Windows Sound Setting via the Control Panel
2. Select Torch as an input device
3. Select required output device, E.g. Latency free rear headphone jack or PC Speakers

MICROPHONE AUDIO PICK-UP PATTERNS

Stereo (Purple)

Ideal for capturing live instruments, vocals, ASMA. Anytime you want to capture increa­sed definition and depth.

Cardioid (Green]

Perfect for any solo situation, whether that’s Streaming, Gaming, Podcasting or Web Calls.

Whisper (Blue)

Great for when you have to be at your quietest, but still need to be heard.
Ideal for night time use when gaming, chatting etc.

MASTER VOLUME

Use the Master Volume Knob to control the receiving volume levels that you hear.
The Master Volume is synced to the Master Volume of your PC, and includes an integrated mute switch.

GAIN ADJUSTMENT

SIDETONE HARDWARE MONITORING

You can also use the Latency Free Sidetone feature to hear the level of your own voice output when setting the gain to ensure an error free, professional set-up.

Set Up Steps for Sidetone Hardware Monitoring:

1. Open Sound Settings
2. Click device properties for Output Devices
3. Click ·Additional Device Settings· to bring up the ‘Speakers Properties’
4. Click the “LevelsM tab
5. Ensure the microphone sound tab is ‘unchecked’
6. Re-check the tab when finished to mute your voice set up if required

Note:
It is important to choose the .levels· tab in the Output/ Speakers Properties window. This ensures you are setting up using Hardware Monitoring of the Torch, not the PC software.
This feature is for set up only, and does not mute the Microphone when using on a broadcast.

MUTE FUNCTIONS

Contectless Quick Mute:
To use Contactless Mute, wave your hand over the top of the Torch like shown. Your device should illuminate Red.

CONNECT TO A BOOM ARM

1. Unscrew microphone from base
   Note: Once the microphone is base detached, re-screw the base collar cap flush to top of threaded shaft, to cover the exposed thread.

2. **Connect Microphone to Boom arm (not included]***

3. Use the extra included USB-C to USB-C (1.Bm) cable to connect  the microphone to the base.

4. Connect the base to you PC using the USB-A to USB-C Cable

Note: Do not connect the microphone unit directly to the PC.

*Use the included Universal Adapter 3/8″-16 Male UNC to%. -27 LINS

Female to fit Your TORCH to a wide range of boom arms. Some Models might Female to require fit a your special TORCH to adapter, a wide which range needs of to boom be arms. purchased Some models separately.

TECHNICAL FACTS

TECH SPECS

• Sample/Bit Rate: 4B kHz, 24- bit with optional selection for 44.1 kHz
• Capsules: 2 x ROCCAT’8 Proprietary 014 x 6.5mm condenser capsules
• Pick-Up Patterns: Cardioid, Stereo, Whisper (ROCCA”fG Proprietary)
• Frequency Response: 20hz • 20kHz
• Max SPL: 11 □dB
• Zero-latency 3.5mm, 4-Pole headphone socket
• Dimensions (Desktop full assembled]: 138mm x 95mm x 208mm
• Weight (microphone and stand): 500g
• Weight (microphone only): 290g

SYSTEM REQUIREMENTS

• Windows-3 7, 8.1,10 or 11
• USB 1.1/2.0/3.0

Should you need assistance …
Our support team is ready to help you with any technical questions. Just send an e-mail to support@roccat.com or visit our website at:
WWW.ROCCAT.COM/SUPPORT

Join the community

Become a ROCCAT® member and register your product at:

www.roccat.com/support/register-your-product

Service & support
Easy access to customer support

Authenticity check
Make sure you own an original

Exclusive deals
Opt-in for special offers and downloads

Please use your product’s serial number
[ located on the bottom label ]

REGULATORY COMPLIANCE STATEMENTS FOR THE TORCH

FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES
CLASS B INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class 8 digital device. pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential Installation. This equipment generates , uses, and can radiate radio frequency energy end, If not I talled and used In accordance with the instructions , may cause harmful Interference to radio communications. However, there is no guarantee that Interference will not occur In a particular Installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and o , the user is encouraged to try to correct the interference by one or more of the following measures :

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Correct the equipment I to an outlet o a circuit different from that to which the receiver is connected.
• Consults the dealer or an experienced n radio/TV technician for help.

FCC CAUTION:

This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: (11 This device may not cause harmful lnterference, and (21 this device must accept any interference received. including interference that may cause undesired operation.

This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIAJ

CANADIAN ICES STATEMENTS
Canadian Department of Communications Radio Interference Regulation
This digital apparatus does not exceed the Class 8 limits for radio-noise ns emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class 8 digital apparatus complies with Canadian ICES-003.

VOYETRA TURTLE BEACH, INC. I 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA

@ 2021 Voyetra Turtle Beach. Inc. All rights reserved. My product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners. Information contained herein is subject to change without notice. Voyetra Turtle Beach. Inc shall not be made liable for any errors that may appear in this manual. This publication  parts of 2 may not be reproduced without the express consent of the publisher.

EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION (EFTA) REGULATORY COMPLIANCE

Declaration of  confirm
Indicates compliance with the Essential Requirements of the EMC Directive of the European Union 12014/30/EUI. This equipment meets the following conformance standards:

Safety: EN50332-2,EN601325-1 EMC: EN 55032:2015/A112020 EN 55035:2017/A11:2020 CISPR 32:2015.C1SPR 35-2010;

EMC Lighting: CISPR 15:2018 EN55015 2013/A1:2015;EN 61547:20095N 61000-3-22014EN 61000-3-3201341:2019

Environmental: REACH 2005/1907/EC ROHE 2015/853amencling Annex II to Directive 21311/65/EU.5PA :2009/48./EC PAHe 113: REACH Ant .1 7 . e n 5 0 WEEE 2012/19/EU,Packaging 94/62/EC,

FCC: FCC 47 CFR Part15 Packaging TPCH

Please visit the following URL for a complete copy of the Declaration of Conformity:

This symbol on the product or Its packaging Indicates that this product must not be disposed of with your other household waste. Instead, It Is your responsibility to dispose of your waste equipment by handing It over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you chased your product.

Voyetra Turtle Beach Inc. Is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations !Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information o packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>