Shinko QX1 Series Modular Controllers User Guide

: June 4, 2024
: Shinko

Table of Contents

Shinko QX1 Series Modular Controllers
SAFETY PRECAUTIONS
Digital Indicating Controllers
Digital Temp. Indicating Controllers (Analog Type)
Programmable Controllers
Indicators
Communication Units
Signal Conditioners
Sensors (Temperature, Humidity, Other)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shinko QX1 Series Modular Controllers

SAFETY PRECAUTIONS

To ensure safe and correct use, thoroughly read and understand this manual before using this instrument.
This instrument is intended to be used for industrial machinery, mashine tools and measuring equipment.
Verify correct usage after purpose-of-use consultation with our agency or main office.
(Never use this instrument for medical purposes with which human lives are involved.)
External protection devices such as protection equipment against excessive temperature rise, etc. must be installed, as malfunction of this product could result in serious damage to the system or injury to personnel. Also proper periodic maintenance is required.
This instrument must be used under the conditions and environment described in this manual. Shinko Technos Co., Ltd. does not accept liability for any injury, loss of life or damage occurring due to the instrument being used under conditions not otherwise stated in this manual.
The contents of this catalog is as of June. 2021, and the specifications are subject to change without notice.
We have more detailed catalogs for each of the products listed in this product guide. We provide many measuring, controlling, recording and sensing instruments in addition to the products described in this product guide. To inquire, please consult us or our agency.

Caution with respect to Export Trade Control Ordinance

To avoid this instrument from being used as a component in, or as being utilized in the manufacture of weapons of mass destruction(i.e. military applications, military equipment, etc.), please investigate the end users and the final use of this instrument. In the case of resale, ensure that this instrument is not illegally exported.

Digital Indicating Controllers

Panel Mounting

入力| 熱電対, 測温抵抗体, 直流電流, 直流電圧| Input| Thermocouple, RTD, Direct current, DC voltage
---|---|---|---

精度

| 熱電対：各入力スパンの±0.2 %±1デジット以内測温抵抗体：各入力スパンの±0.1%

±1デジット以内

直流電流，電圧：各入力スパンの±0.2%

±1デジット以内

|

Accuracy

| Thermocouple:Within±0.2% of each input span

±1digit

RTD:Within±0.1% of each input span ±1digit DC current,DC voltage:Within±0.2% of each input span ±1digit

外形寸法

| ACS-13A :W48×H48×D62mm ACR-13A,ACR-15A:W48×H96×D110mm ACD-13A ,ACD-15A:W96×H96×D110mm|

Dimensions

| ACS-13A :W48×H48×D62mm ACR-13A,ACR-15A:W48×H96×D110mm ACD-13A ,ACD-15A:W96×H96×D110mm
オプション| 加熱冷却制御, ヒータ断線警報, シリアル通信, 他| Option| Heating/Cooling control, Heater burnout alarm, Serial communicatin,etc.

安全規格

| ACS-13Aのみ

UL:入力定格100～240V AC,24V AC/DC File No.E159038

|

Safety standard

| ACS-13A only

UL:Power input rating100～240V AC,24V AC/DC File No.E159038

Features

Industry-leading large display
A specially-desugned LCD display makes it easier to view (ACD,R series) even in bright light and open-air
ACD-15A,ACR-15A: ON/OFF SERVO digital indicating controller
ACS-13A: 56mm (depth of control panel interion), Space saving.

Shinko QX1 Series Modular Controllers 2

入力| 熱電対, 測温抵抗体, 直流電流, 直流電圧| Input| Thermocouple, RTD, Direct current, DC voltage
---|---|---|---

精度

| 熱電対：各入力スパンの±0.2％±1デジット以内測温抵抗体：各入力スパンの±0.1％

±1デジット以内

直流電流 , 電圧：各入力スパンの±0.2％

±1デジット以内

|

Accuracy

| Thermocouple:Within±0.2% of each input span

±1digit

RTD:Within±0.1% of each input span ±1digit DC current,DC voltage:Within±0.2% of each input span ±1digit

外形寸法

| BCS2:W48×H48×D68(首下60)mm BCR2:W48×H96×D68(首下60)mm BCD2:W96×H96×D68(首下60)mm|

Dimensions

| BCS2:W48×H48×D68(60 mm-deep control panel interior) BCR2:W48×H96×D68(60 mm- deep control panel interior) BCD2:W96×H96×D68(60 mm-deep control panel interior)
オプション| 加熱冷却制御, ヒータ断線警報, シリアル通信, 他| Option| Heating/Cooling control,Heater burnout alarm, Serial communicatin,etc.
安全規格| UL:入力定格100～240V AC,24V AC/DC File No.E159038| Safety standard| UL:Power input rating100～240V AC,24V AC/DC File No.E159038

Features

Program control, converter function are standard features
Each unit needs just 60 mm of control panel space
Dust-proof/Drip-proof IP66 (front panel only)

Shinko QX1 Series Modular Controllers 3

入力| 熱電対, 測温抵抗体, 直流電流, 直流電圧| Input| Thermocouple, RTD, Direct current, DC voltage
---|---|---|---

精度

| 熱電対：各入力スパンの±0.2％±1デジット以内測温抵抗体：各入力スパンの±0.1％

±1デジット以内

直流電流 , 電圧：各入力スパンの±0.2％

±1デジット以内

|

Accuracy

| Thermocouple:Within±0.2% of each input span

±1digit

RTD:Within±0.1% of each input span ±1digit DC current,DC voltage:Within±0.2% of each input span ±1digit

安全規格

| UL: 入力定格 100～240V AC, 24V AC/DC 50/60Hz

File No. E159038

|

Safety standard

| UL: Power input rating 100～240V AC, 24V AC/DC 50/60Hz

File No. E159038

Features

Compact size (width: 48 mm, height: 24 mm)
Program control, converter function are standard features
入力| 熱電対, 測温抵抗体, 直流電流, 直流電圧| Input| Thermocouple, RTD, Direct current, DC voltag.e
---|---|---|---

精度

| 熱電対：各入力スパンの±0.2％±1デジット以内測温抵抗体：各入力スパンの±0.1％

±1デジット以内

直流電流 , 電圧：各入力スパンの±0.2％

±1デジット以内

|

Accuracy

| Thermocouple:Within±0.2% of each input span

±1digit

RTD:Within±0.1% of each input span ±1digit DC current,DC voltage:Within±0.2% of each input span ±1digit

オプション

| 加熱冷却制御, ヒータ断線警報, シリアル通信, 外観色：黒, 端子カバー|

Option

| Heating/Cooling control, Heater burnout alarm,

Serial communication, Front panel frame and case: Black,

Terminal cover

安全規格| UL: 入力定格 100～240 V AC File No. E159038|

Safety standard

| UL: Power input rating 100～240 V AC File No. E159038

DIN Rall Mounting

入力	熱電対，測温抵抗体，直流電流，直流電圧	Input	Thermocouple, RTD, Direct current, DC voltage

精度

| 熱電対 : 各入力スパンの±0.2 %

±1デジット以内

測温抵抗体 : 各入力スパンの±0.1 %

±1デジット以内

直流電流，電圧 : 各入力スパンの±0.2 %

±1デジット以内

|

Accuracy

|

Thermocouple : Within ±0.2 % of each input span ±1 digit

RTD : Within ±0.1 % of each input span ±1digit Direct current, DC voltage : Within ±0.2 % of each input span ±1digit

オプション

| ヒータ断線警報，シリアル通信(RS-485)

加熱冷却制御出力，設定値メモリ外部切替機能，外部設定入力

|

Option

| Heater burnout alarm, Serial communication (RS-485),

Heating/Cooling control, Set value memory external selection, External setting input

安全規格| UL: 入力定格 100～240V AC, 24V AC/DC

File No. E159038

| Safety standard| UL: Power input rating 100 to 240 V AC, 24 V AC/DC

File No. E159038

Features

The cost-effective, multi-range controller which can be changed easily to the converter via keypad (for direct current output type only)
Optional Heating/Cooling control, External setting input, etc.
入力| 熱電対，測温抵抗体，直流電流，直流電圧赤外線熱電対| Input| Thermocouple, RTD, Direct current, DC voltage

Infrared thermocouple

---|---|---|---
| 熱電対: 各入力スパンの±0.2 %| | Thermocouple: Within ±0.2 % of each input span ±1 digit

RTD: Within ±0.1 % of each input span

±1digit

Direct current, DC voltage: Within ±0.2 % of each input span ±1digit

Infraed thermocouple : Within±0.2% of each input span ±1digit

Features

User-defined combination. ・Space saving, Energy saving
I/O for each channel is individually selectable
Input sampling period selectable.

Communication Type Control Unit

入力	熱電対，測温抵抗体，直流電流，直流電圧	Input	Thermocouple, RTD, Direct current, DC voltage

精度

| 熱電対: 各入力スパンの±0.2 %

±1デジット以内

測温抵抗体: 各入力スパンの±0.1 %

±1デジット以内

直流電流，電圧: 各入力スパンの±0.2 %

±1デジット以内

|

Accuracy

| Thermocouple: Within ±0.2 % of each input span ±1 digit

RTD: Within ±0.1 % of each input span

±1digit

Direct current, DC voltage: Within ±0.2 % of each

input span ±1digit

Open Collector

オプション

| ヒータ断線警報／操作端短絡警報（単相，3相）, 加熱冷却制御出力|

Option

| Heater burnout alarm/Actuator short circuit alarm (Single-phase, Three- phase), Heating/Cooling control output
安全規格| UL：入力定格 24V DC

__安全規格 File No. E159038

| Safety standard| UL: Power input rating 24V DC File No. E159038

Features

Multi-range, compact size DIN rail mounted type
Setting and operation via the communication function.
A terminal block (ATB-001-1) is required.
For direct current input, connect a 50Ω shunt resistor (RES-S03-050) externally.

Modular controllers

Shinko QX1 Series Modular Controllers 9

入力| 熱電対，測温抵抗体，直流電流(1)，直流電圧| Input| Thermocouple, RTD, Direct current(1), DC voltage
---|---|---|---

精度

| 周囲温度23℃，取り付け角度 5度において熱電対：各入力スパンの 0.2％以内

測温抵抗体：各入力スパンの 0.1％以内直流電流：各入力スパンの 0.2％以内直流電圧：各入力スパンの 0.2％以内

|

Accuracy

| At ambient temperature of 23℃ and mounting angle of 5 degrees

Thermocouple: Within 0.2% of each input span RTD: Within 0.1% of each input span

Direct currentage: Within 0.2% of each input span DC voltage: Within 0.2% of each input span

サンプリング周期

| 20 ms(直流電流，電圧のみ有効)

50 ms(直流電流，電圧のみ有効)

125 ms(*2)

|

Sampling period

| 20 ms (with only DC voltage input and Direct current input enabled)

50 ms (with only DC voltage input and Direct current input enabled)

125 ms(*2)

制御動作| 2自由度PID，fast-PID，Slow-PID，Gap-PID ON-OFF| Control action| 2DOF PID, Fast-PID, Slow-PID, Gap-PID ON-OFF

制御出力

| リレー接点，無接点電圧(SSR駆動用)，直流電流，直流電圧，オープンコレクタ(NPN)，

トライアック(AC出力ゼロクロス方式)

|

Control output

端子カバー取り付け時，奥行き95 mm

Features

Max.1024 points measurement, control and monitoring
Flexible use to suit any application or site
Program-less connections to PLCs for reduced work
Usable as an analog module for reducing initial costs and wiring
Failure prediction maintenance and risk avoidance
Peak power suppression function
Improved product quality
Five included control methods for reduced manual labor.

In the case of Direct current input, some ranges require an external 50Ω shunt resistor (RES-S01-050).
Fixed to 125 ms regardless of settings for thermocouple input and RTD input.

通信回線| EIA RS-422A準拠EIA RS-485準拠| Communication lines| EIA RS-422A compliant EIA RS-485 compliant
---|---|---|---
同期方式| 半二重通信| Communication method| Half-duplex communication
通信方式| 調歩同期式| Synchronization method| Start-stop synchronization

通信速度

| 9600, 19200, 38400, 57600 bpsを通信仕様

選択用ディップスイッチにて選択

| Communication speed| Selecting 9600, 19200, 38400, or 57600 bps is possible using the communication specification selection DIP switches.

データビット/ パリティ

| データビット: 7ビット，8ビットパリティビットあり，なし

パリティ: 偶数，奇数

通信仕様選択用ディップスイッチにて選択

|

Data bit/parity

| Data bit:7 bits, 8 bits

Parity bit:With parity, No parity Parity:Even, Odd

Select by communication specification selection DIP switch.

ストップビット| 1ビットまたは2ビットを通信仕様選択用ディップスイッチにて選択|

Stop bit

| Selecting 1 or 2 is possible using the communication specification selection DIP switch.
接続台数| 制御モジュール最大16台Cシリーズ互換の場合，最大5台| Number of connections| Control module: Max 16 modules

For C series compatible, max 5 modules

Digital Temp. Indicating Controllers (Analog Type)

Digital Temperature Indicating Controller

入力	熱電対, 測温抵抗体	Input	Thermocouple, RTD
精度	各入力スパンの±0.5％±1デジット以内	Accuracy	Within±0.5% of each input span ±1digit
サンプリング周期	250 ms	Sampling period	250 ms
制御動作	PD, ON/OFF	Control action	PD, ON/OFF
制御出力	リレー接点, 無接点電圧	Control output	Relay contact,Non-contact voltage
電源電圧	100～240V AC 50/60Hz	Supply voltage	100 to 240V AC 50/60Hz
外形寸法	W96xH96xD120mm	Dimensions	W96xH96xD120mm

Features

Potentiometer analog setting, Auto-reset function
Control action can be changed with the DIP switch

Digital Deviation Indicating Temperature Controller

入力	熱電対, 測温抵抗体	Input	Thermocouple, RTD
精度	各入力スパンの±0.3％±1デジット以内	Accuracy	Within±0.3% of each input span ±1digit
サンプリング周期	250 ms	Sampling period	250 ms
制御動作	PD, ON/OFF	Control action	PD, ON/OFF
制御出力	リレー接点, 無接点電圧, 直流電圧	Control output	Relay contact, Non-contact voltage,

Features

Simple seting just like an analog controller (with LED deviation display)
Control action, alarm type selectable with the DIP, Rotary switches

2ch Oven Temperature Controller

入力	熱電対	Input	Thermocouple
入力点数	2点(上火温度, 下火温度)	Input points	2 (for top heater and bottom heater)
工程時間	0秒～99分50秒	Baking time	0 sec. to.99 min. 50 sec.
指示精度	±2℃(フルスケールの±0.2％+1デジット相当)	Indicaticn Accuracy	±2℃ (Equivalent to

Features

Device devaloped for baking and confectionery
2-channel control (top and bottom heater control)
Programmable controller function equipped

10ch Temperature Control Board

Features

Multi-point I/O on a single board
Simple mounting
Customizable
Newly developed – Economical, Short delivery time

Monitoring Software

By using the monitoring software, setting item change, data logging and monitoring can be carried out on a PC. Shinko cable (sold separately) is required.
Model : ACx-13A, DCL-33A, NCL-13A,BCx2 series, PCA1, PCB1, etc.

Programmable Controllers

100 patterns

入力| 熱電対，測温抵抗体，直流電流，直流電圧

(PCT-100は測温抵抗体のみ)

| Input| Thermocouple, RTD, Direct current, DC voltage

(PCT-100: RTD only)

---|---|---|---

精度

| 熱電対: 各入力スパンの±0.2 %

±1デジット以内

測温抵抗体: 各入力スパンの±0.1 %

±1デジット以内

直流電流，電圧: 各入力スパンの±0.2 %

±1デジット以内

|

Accuracy

| Thermocouple: Within ±0.2 % of each input span ±1 digit

RTD: Within ±0.1 % of each input span

±1digit

Direct current, DC voltage: Within ±0.2 % of each input span ±1digit

温度調節モジュール: DIN レール取付方式

| Mounting| Touch screen: Flush

Temperature controlmodule: DIN rail

USBメモリ，他

| Components| Temperature control module, Cable for front

mounted USB port, USB memory, etc.

Features

Easier to view and operate via touch screen display
100-patterns/100-steps large-capacity memory
Control data logging (USB flash memory): Recorders not required
Languages: Japanese, English, Chinese, Korean(for PCT-200)

16 patterns

入力	熱電対，測温抵抗体，直流電流，直流電圧	Thermocouple, RTD, Direct current, DC voltage
	熱電対: 各入力スパンの±0.2 %	Thermocouple: Within ±0.2 % of each input
	±1デジット以内	span ±1 digit
精度	測温抵抗体: 各入力スパンの±0.1 %

±1デジット以内

直流電流，電圧: 各入力スパンの±0.2 %

±1デジット以内

| Accuracy| RTD: Within ±0.1 % of each input span

±1digit

Direct current, DC voltage: Within ±0.2 % of each input span ±1digit

256ステップ(16ステップ/パターン)

| Number of patterns

Number of steps

| 16 (Linkable)

256 (16 steps/pattern)

オプション

| シリアル通信(RS-232C, RS-485)，タイム

シグナル出力，伝送出力，加熱冷却制御出力

|

Option

| Serial communication (RS-232C, RS-485), Time signal output,Transmission output, Heating/ Cooling control

Features

16-patterns 16-steps, A maximum of 256 programmable steps
Power supply and quick setup using a USB Communication Cable
Dust-proof / Drip-proof IP66 (front panel only)

10 patterns

入力| 熱電対, 測温抵抗体，直流電流，直流電圧| Input| Thermocouple, RTD, Direct current, DC voltage
---|---|---|---

精度

| 熱電対: 各入力スパンの±0.2 %±1デジット以内測温抵抗体: 各入力スパンの±0.1 %

±1デジット以内

直流電流，電圧: 各入力スパンの±0.2 %

±1デジット以内

|

Accuracy

| Thermocouple: Within ±0.2 % of each input span ±1 digit

RTD: Within ±0.1 % of each input span ±1 digit Direct current, DC voltage: Within ±0.2 % of

each input span ±1 digit

100ステップ(10ステップ/パターン)

| Number of patterns

Number of steps

| 10 (Linkable)

100 (10 steps/pattern)

リピート回数| 10000回| Number of repetitions| 10000 times
イベント出力| タイムシグナル出力，パターンエンド出力，

RUN出力，他

| Event output| Time signal output, Pattern end output,

RUN output, etc.

外形寸法| W96×H96×D68(首下60) mm| Dimensions| W96×H96×D68 mm

(60 mm-deep control panel interior)

オプション| 加熱冷却制御出力，ヒータ断線警報出力，

シリアル通信(RS-485)，他

| Option| Heating/Cooling control, Heater burnout alarm

Serial communication (RS-485), etc.

安全規格| UL: 入力定格 100～240V AC, 24V AC/DC

File No. E159038

| Safety standard| UL: Power input rating 100 to 240V AC, 24V AC/DC

File No. E159038

Features

10-patterns 10-steps, A maximum of 100 programmable steps
Power supply and, quick setup using a USB communication cable
Dust-proof / Drip-proof IP66 (front panel only)

Recorder

入力	熱電対，測温抵抗体，直流電流，直流電圧	Input	Thermocouple, RTD, Direct current, DC voltage
入力点数	1点(ペン式), 2点(ペン式), 6点(打点式)	Input points	Pen：1-point, 2-point Dot

printing：6-point
記録巾| 100mm| Recording chart width| 100mm

警報

| 標準装備の警報出力はありませんが, ALM 表示灯が点灯します。設定数は各チャネルごとに上限(２点), 下限(２点)の最大４点|

Alarm

| No standard alarm output is provided, however, ALM indicator lights up. Number of

setting：Max. 4 points (2 points for high limit and 2 point for low limit for every channel)

耐電圧

| 電源端子 – 接地端子間：1.5kV AC 1分間入力端子 – 接地端子間：500V AC 1分間入力端子間：200V AC 1分間|

Didlectric strength

Features

Effective recording width 100mm
Short Depth (150mm) and Light weight (1.5kg)
Communication function (RS-232C) is provided as standard
Multi-range input

Indicators

Digital indicators

入力	熱電対，測温抵抗体，直流電流，直流電圧	Input	Thermocouple, RTD, Direct current, DC voltage

精度

| 熱電対：各入力スパンの±0.2％±1デジット以内

測温抵抗体：各入力スパンの±0.1％±1デジット以内直流電流, 電圧：各入力スパンの±0.2％

±1デジット以内

|

Accuracy

| Thermocouple:Within±0.2% of each input span

±1digit

RTD:Within±0.1% of each input span ±1digit DC current,DC voltage:Within±0.2% of each input span ±1digit

high with standby , Process low with standby, High/Low limit range alarm

オプション

| シリアル通信(RS-485)，警報出力4, 絶縁電源出力，2線式伝送器用電源,

伝送出力2，指定伝送出力，端子カバー，他

|

Option

| Serial communication(RS-485),Alarm output 4 (A4), Insulated power output, Power for 2-wire transmitter,Transmission output 2, User

speciﬁed transmission output,Terminal cover, etc.

安全規格| UL：入力定格100～240V AC,24V AC/DC

File No. E159038

| Safety standard

| UL: Power input rating 100 to 240V AC, 24V AC/DC

File No. E159038

Features

Standard spec: Multi-input, 3 points of alarm Alarm output, Transmission output (4 to 20 mA DC) , IP66
Optional spec: Alarm output (A4), Transmission output 2 Power for 2-wire transmitter.

Hand-Held Digital Thermo-hygrometer

入力	熱電対，測温抵抗体，専用温湿度センサ	Input	Thermocouple, RTD, Hygrothermo sensor

指示精度

| 熱電対：±0.2％FS±1デジット以内

測温抵抗体：±0.1％FS±1デジット以内

温湿度センサ：±0.3℃(％RH)

Features

Memory function for 10 pieces of data
Back-light lets you check data in the dark
Multi-range input

Level Switch

検出トルク| 0.049N・m(0.5kg・cm)以上(固定)| Detecting torque| 0.049N•m(0.5kg•cm) or more (Fixed)
---|---|---|---
羽根回転数| 1rpm(min-1) (60Hz)| Wing rotation speed| 1rpm(min-1) (60Hz)
動作方式| モータによる検出羽根の回転方式| Action| Detector wing revolution by motor
検出部の長さ| 85, 100, 150, 200, 250mm(いずれか指定)| Wing shaft length| 85, 100, 150, 200, 250mm(Specify when ordering)
リード線| 5芯キャブタイヤコード長さ2m| Lead wire| 5-wire cabtyre cord, 2m (Vinyl coated)
防塵・防滴| IP66 (取付けナットから検出部側除く)| Dust-proof/ Drip-proof| IP66 (excluding parts from the Main unit mounting nut to detector wing)
電源電圧| AC 100V, 110V, 115V, 200V, 220V, 230V,

240V(いずれか指定) 50/60Hz

| Supply voltage| 100V, 110V, 115V, 200V, 220V, 230V, 240V AC

(Specify when ordering) 50/60Hz

Features

Extremely Durable 100% Die-cast Aluminium Unit
Stainless steel Detector wing
Dust-proof/Drip-Proof IP66(excluding parts from the Main unit mounting nut to detector wing.

Actuators (Output Units)

Power Controllers

定格電流容量

| PA-215 ：15A 3kVA(単相), 5.2kVA(3相) PA-230 ：30A 6kVA(単相), 10.4kVA(3相) PA-260 ：60A 12kVA(単相), 20.8kVA(3相) PA-2100 ：100A 20kVA(単相), 34.6kVA(3相) PA-2150 ：150A 30kVA(単相), 52.0kVA(3相)|

Rated current Capacity

| PA-215 ：15A 3kVA(Single-phase), 5.2kVA(3-phase) PA-230 ：30A 6kVA(Single- phase), 10.4kVA(3-phase) PA-260 ：60A 12kVA(Single-phase), 20.8kVA(3-phase) PA-2100 ：100A 20kVA(Single-phase), 34.6kVA(3-phase) PA-2150 ：150A 30kVA (Single-phase), 52.0kVA(3-phase)
---|---|---|---
入力信号| 直流電流4～20mA DC, 直流電圧0.8～4V DC 無接点電圧入力, 手動設定| Input signal| 4 to 20mA DC, 0.8 to 4V DC

Non-voltage contact input, Manual setting

制御方式

| いずれか指定

・単相位相制御方式

・ゼロクロス分周方式

・3相位相制御方式(3相の時ゼロクロス分周方式はありません)

|

Control system

| Specify from below.

・Single-phase control

・Zero-cross frequency division control

・3-phase control (There is no zero cross when 3-phase is applied.)

定格電圧| 100V/110V AC, 200V/220V AC共用

（150A用の時, いずれか指定）

| Rated voltage| 100V/110V AC, 200V/220V AC

(Specify one for 150A.)

Features

H series can be used precision control and inductive resistance
Z series that is noiseless is recommended for computer lines

定格電流| 20A, 30A, 40A, 50A, 75A, 100A| Input signal| 20A, 30A, 40A, 50A, 75A, 100A
---|---|---|---
入力信号| 直流電流4～20mA DC, 直流電圧1～5V DC またはオンオフ接点信号(端子にて切替)| Input signal| 4 to 20mA DC, 1 to 5V DC or ON/OFF contact signal (selectable by terminal)
制御方式| 位相制御/分周制御(DIPスイッチ切替)| Control system| Phase control / Frequency division control (Selectable by DIP switch)
定格電圧| 100～120V AC, 200～240V AC共用| Rated voltage| 100 to 120V AC, 200 to 240V AC

Features

Compact and light single-phase AC power controller
Phase control system (H) and zero cross frequency division contorl system (Z) (Selectable by built-in DIP switch)

Solid State Relays

定格負荷電流| SA-420-Z：0.1～20A, SA-440-Z：0.5～40A| Rated current| SA-420-Z：0.1～20A, SA-440-Z：0.5～40A
---|---|---|---
定格入力電圧| 5～24V DC| Input voltage| 5 to 24V DC
定格負荷電圧| 100～240V AC| Load voltage| 100 to 240V AC

絶縁抵抗

| 100MΩ 以上（500V DC にて） (INPUT端子, LOAD端子, 放熱器相互間)|

Insulation resistance

| 100MΩ or more (at 500V DC)：

Between Input/Load terminals, Between terminals

-Heat sink

耐電圧

| 3000V AC, 1分間

(INPUT端子, LOAD端子, 放熱器相互間)

|

Dielectric strength

| 3000V AC for 1 minute

Between Input/Load terminals, Between terminals

-Heat sink

外形寸法| SA-420：W30×H100×D100mm SA-440：W45×H100×D100mm| Dimensions| SA-420：W30×H100×D100mm SA-440：W45×H100×D100mm

Features

Both DIN rail and panel mountable
Easy viewing of action by LED display

定格負荷電流| SA-515-Z：15A, SA-525-Z：25A, SA-540-Z：40A| Rated current| SA-515-Z：15A, SA-525-Z：25A, SA-540-Z：40A
---|---|---|---
操作入力電圧| 4～32V DC| Input side control voltage| 4 to 32V DC
負荷電圧| 75～250V AC 45～65Hz| Load voltage| 75 to 250V AC 45 to 65Hz
絶縁抵抗| 入力-出力間：100MΩ以上500V DCにて| Insulation resistance| Input-Output：100MΩ or more, at 500V DC

耐電圧

| 入力端子 – 出力端子間：4000V AC 1分間入力端子 – ケース間：2500V AC 1分間|

Dielectric strength

| Input terminal – Output terminal：4000V AC for

1 minute

Input terminal – Case：2500V AC for 1 minute

外形寸法| W40×H58×D25.5mm| Dimensions| W40×H58×D25.5mm

Features

Cost efficient for customized systems
Built-in ‘varistor’ for absorbing external power surges

Communication Units

For PC

ホストコンピュータ ⇔ 本器間	Host computer ⇔ IF-400
通信回線：RS-232C／RS-422A／RS-485準拠	Communication line：RS-232C/RS-422A/RS-485
本器 ⇔ 調節計間	IF-400 ⇔ Controller
通信回線：RS-485準拠	Communication line：RS-485
通信速度	2400／4800／9600／19200bps(いずれか選択)

A communication converter/repeater that interfaces a controller (RS-485) with host computer (RS-232C or RS-422A)

For PLC

PLC ⇔ 本器間	PLC ⇔ SIF-400

通信回線：RS-232C／RS-422A／RS-485準拠通信：キー操作で以下の設定が可能

通信速度(9600／19200bps), データ長(7／8ビット),

バリティビット（無し, 奇数, 偶数）, ストップビット（1ビット／2ビット）

| Communication line ：RS-232C/RS-422A/RS-485 Communication ：The following can be set by keypad.

Communication speed: 9600/19200 bps Data length: 7 bits/8 bits

Parity: No parity/Even/Odd Stop bit: 1 bit/2 bits

本器 ⇔ 調節計間| SIF-400 ⇔ Contoller
通信回線：RS-485準拠

調節計形名：SIF-400：DCL-33A, JC□-33Aシリーズ, NCL-13A

SIF-400-AC：ACS-13A(専用)

| Communication line ：RS-485

Controller model name：SIF-400：DCL-33A, JC□-33A series, NCL-13A

SIF-400-AC：ACS-13A only

接続可能台数| SIF-400 1台に付き,調節計を最大32台接続

可能（固定アドレス方式は最大20台）

Interface unit to connect the PLC and controllers.

For PLC

PLC ⇔ 本器間	PLC ⇔ SIF-600

通信回線： RS-232C／RS-422A／RS-485準拠

RS-422A RXA,RXB間に終端抵抗（200Ω）を内蔵通信： 9600／19200／38400bps

スタートビット： 1ビット

データ長： 7ビット／8ビットパリティビット：無し／偶数／奇数ストップビット： 1ビット／2ビット

| Communication line： RS-232C/RS-422A/RS-485

RS-422A：Built-in terminator (200Ω) between RXA and RXB

Communication speed：9600／19200／38400bps Start bit ： 1 bit

Data length： 7 bits/8 bits

Parity ： No parity/Even/Odd Stop bit ： 1 bit/2 bits

本器 ⇔ 調節計間| SIF-600 ⇔ Contoller
通信回線：RS-485準拠

対象機器：神港プロトコル, MODBUSプロトコル(ASCII, RTU) 搭載製品

| Communication line：RS-485

Connectable controllers：Controllers with Shinko protocol & MODBUS protocol (ASCII, RTU)

接続可能台数

Features

To suit your needs, choose form 4 communication methods
Enables communication between PLC and peripheral devices
Easy connection without programming (Shinko’s WCL-13A)

Signal Conditioners

I/O type: Changeable

SGI	アイソレータ（1 出力）	Isolator(1-output)
SGIW	アイソレータ（2 出力）	Isolator(2-outputs)
SGS	直流信号変換器（1 出力）	DC signal transmitter(1-output)
SGSW	直流信号変換器（2 出力）	DC signal transmitter(2-outputs)
SGD	ディストリビュータ（1 出力）	Current loop supply(1-output)
SGDW	ディストリビュータ（2 出力）	Current loop supply(2-outputs)
SGM	比率設定付ディストリビュータ（1 出力）	Current loop supply with ratio setting(1-output)
SGMW	比率設定付ディストリビュータ（2 出力）	Current loop supply with ratio setting(2-outputs)
SGT	熱電対変換器（1 出力）	Thermocouple transmitter(1-output)
SGTW	熱電対変換器（2 出力）	Thermocouple transmitter(2-outputs)
SGR	測温抵抗体変換器（1 出力）	RTD transmitter(1-output)
SGRW	測温抵抗体変換器（2 出力）	RTD transmitter(2-outputs)
SGP	ポテンショメータ変換器（1 出力）	Potentiometer transmitter(1-output)
SGPW	ポテンショメータ変換器（2 出力）	Potentiometer transmitter(2-outputs)
SGU	ユニバーサル変換器（1 出力）	Universal transmitter(1-output)
SGUW	ユニバーサル変換器（2 出力）	Universal transmitter(2-outputs)
SGL	リニアライザ（1 出力）	Linearizer(1-output)
SGF	マルチパルス変換器（1 出力）	Multi pulse transmitter(1-output)
SGFW	マルチパルス変換器（2 出力）	Multi pulse transmitter(2-outputs)
SGJ	パルスアナログ変換器（1 出力）	Pulse-Analog transmitter(1-output)
SGJW	パルスアナログ変換器（2 出力）	Pulse-Analog transmitter(2-outputs)
SGQ	温度差変換器（1 出力）	Differential transmitter(1-output)
SGZ	四則演算器（1 出力）	2-input math function transmitter(1-output)

Products necessary for air-conditioning control are lined up in the Multi series.

SGH	選択変換器 (Hi/Lo セレクタ ) （1 出力）	High/Low selector(1-output)
SGB	レシオバイアス ( 比率変換器 ) （1 出力）	Ratio, Bias(Ratio transmitter)(1-output)
SGBW	レシオバイアス ( 比率変換器 ) （2 出力）	Ratio, Bias(Ratio transmitter)(2-outputs)
SGXW	スプリット演算器（2 出力）	Split-Range transmitter(1-output)
SGC	リミッタ変換器（1 出力）	Limiter(1-output)
SGCW	リミッタ変換器（2 出力）	Limiter(2-outputs)

2 出力， 4 出力製品をラインアップoutputs and 4-outputs are available.

SGAL| 計装信号入力アラームセッタ

(4 ～ 20mA, 1 ～ 5V 専用 )(2 出力 )

| Instrumentation signal input Alarm setter (4 to 20mA, 1 to 5V only)(2-outputs)
SGAL| 計装信号入力アラームセッタ

(4 ～ 20mA, 1 ～ 5V 専用 )(4 出力 )

| Instrumentation signal input Alarm setter (4 to 20mA, 1 to 5V only)(4-outputs)
SGAU| ユニバーサル入力アラームセッタ (2 出力 )| Universal input Alarm setter(2-outputs)
SGAU| ユニバーサル入力アラームセッタ (4 出力 ) Universal input Alarm setter(4-outputs)

I/O type: Fixed SH series

SHI	アイソレータ（1 出力）	Isolator(1-output)
SHIW	アイソレータ（2 出力）	Isolator(2-outputs)
SHS	直流信号変換器 (1 出力 )	DC signal transmitter(1-output)
SHSW	直流信号変換器 (2 出力 )	DC signal transmitter(2-outputs)
SHD	ディストリビュータ (1 出力 )	Current loop supply(1-output)
SHDW	ディストリビュータ (2 出力 )	Current loop supply(2-outputs)
SHT	熱電対変換器（1 出力）	Thermocouple transmitter(1-output)
SHTW	熱電対変換器（2 出力）	Thermocouple transmitter(2-outputs)
SHR	測温抵抗体変換器（1 出力）	RTD transmitter(1-output)
SHRW	測温抵抗体変換器（2 出力）	RTD transmitter(2-outputs)
SHP	ポテンショメータ変換器（1 出力）	Potentiometertransmitter(1-output)
SHPW	ポテンショメータ変換器（2 出力） Potentiometertransmitter(2-outputs)

SB series/SC series

Features

Simple wiring into plug-in socket for power supply & I/O (SB series)
RMS computation, 3rd harmonic wave, JIS C1111(SC series)

SE series

Features

I/O programmable, with viewable displays
Compact, with various standard functions
Plug-in type

Water Quality Management Products

Panel Mounting

AER-102-PH	pH 計	pH Meter
AER-101-ORP	ORP( 酸化還元電位 ) 計	ORP Meter
AER-102-ECH	導電率 ( 高濃度 ) 計	Conductivity Meter (High)
AER-102-ECL	導電率 ( 低濃度 ) 計	Conductivity Meter (Low)
AER-102-SE	比抵抗計	Resistivity Meter
AER-101-TU	濁度／ SS 計	Turbidity/SS Meter
AER-102-DO	溶存酸素計	DO Meter

Internal Panel Mounting

WIL-102-PH	pH 計	pH Meter
WIL-101-ORP	ORP( 酸化還元電位 ) 計	ORP Meter
WIL-102-ECH	導電率 ( 高濃度 ) 計	Conductivity Meter (High)
WIL-102-ECL	導電率 ( 低濃度 ) 計	Conductivity Meter (Low)
WIL-102-SE	比抵抗計	Resistivity Meter
WIL-101-TU	濁度／ SS 計	Turbidity/SS Meter
WIL-102-DO	溶存酸素計	DO Meter

Outdoor Mounting

FEB-102-PH	pH 計 / ORP( 酸化還元電位 ) 計	pH Meter / ORP Meter
FEB-102-ECH	導電率 ( 高濃度 ) 計	Conductivity Meter (High)
FEB-102-ECM	導電率 ( 低濃度 ) 計	Conductivity Meter (Low)
電源電圧	100 ～ 240V AC 50/60Hz	Supply voltage
---	---	---
外形寸法	W240×H162×D75mm	Dimensions

Sensors (Temperature, Humidity, Other)

Humidity Detectors, Temperature/Humidity Detectors

センサの種類

| 温度：白金薄膜測温抵抗体(JIS Pt100 B級) 湿度：静電容量変化型|

Sensor type

| Temperature: Platinum thin ﬁlm RTD (JIS Pt100 B class)

Humidity: Electrostatic capacity variation type

---|---|---|---
測定範囲| 温度：0～80℃

湿度：5～90 %RH

| Measurement range| Temperature: 0 to 80℃

Humidity: 5 to 90 %RH

精

|

度

| 温度： ±(0.3+0.005|t|) ℃ (JIS Pt100クラスB )

湿度： ±3 %RH以内(20～80 %RH，15～55℃の範囲内で精度補償)

±4 %RH以内(20～80 %RH，0～65℃の範囲内で精度補償)

±5 %RH以内(0～100 %RH，5～45℃の範囲内で精度補償)

±6 %RH以内(20～80 %RH，65～75℃の

範囲内で精度補償)

±8 %RH以内(0～100 %RH，0～80℃の範囲内で精度補償)

|

Accuracy

| Temperature: ± (0.3+0.005|t|) ℃ (JIS Pt100 Class B) Humidity:

Within ±3 %RH (Accuracy guaranteed

within the range of 20 to 80 %RH, 15 to 55 ℃)

Within ±4 %RH (Accuracy guaranteed within the range of 20 to 80 %RH，0 to 65℃)

Within ±5 %RH (Accuracy guaranteed within the range of 0 to 100 %RH, 5 to 45℃)

Within ±6 %RH (Accuracy guaranteed within the range of 20 to 80 %RH, 65 to 75 ℃)

Within ±8 %RH (Accuracy guaranteed within

the range of 0 to 100 %RH, 0 to 80℃)

応答特性

| 温度：35秒

湿度：約20秒[30⇔85 %RHを100とした時の90 %到達時間。ただし, エアフロー51/min(0.16m/s)] (センサチップ部防水フィルタ実装済)

|

Response time

| Temperature: 35 seconds

Humidity: Approx. 20 sec [Time to reach 90% of 30⇔85 %RH. However, airﬂow 51/min (0.16 m/s)] (Waterproof ﬁlter mounted to the sensor chip)

出

|

力

| 温度：3導線式 100 Ω at 0℃ (JIS Pt100クラスB)

湿度： 0～1 V DC(0～100 %RHに対してリニア)

|

Output

| Temperature: 3-wire type 100Ω at 0℃ (JIS Pt100 Class B)

Humidity: 0 to 1 V DC(Equivalent to 0 to 100%R H

電源電圧| 5 V DC(5 %以内)| Supply voltage| 5 V DC (Within 5 %| )

Indoor Sensors, Duct Inserted Sensors

DSW-100-T	室内形温度センサ	Indoor temperature sensor
DSW-100-H	室内形湿度センサ	Indoor humidity sensor
DSW-100-T□H□	室内形温湿度センサ	Indoor temperature/humidity sensor
DSW-200-CO2	室内形CO2濃度センサ	Indoor CO2 sensor
DSD-101-CO2	ダクト挿入形CO2濃度センサ	Duct inserted CO2 sensor
DSD-200-HA	ダクト挿入形湿度センサ	Duct inserted humidity sensor

Infrared Temperature Sensors

測定範囲	0～250℃，0～500℃	Measurement range	0 to 250℃, 0 to 500℃
視野角	2:1（RD-502），15:1（RD-515)	Field-of-view	2 :1(RD-502), 15:1(RD-515)
応答特性	240ms （90% 応答）	Response time	240ms (90% response)
出力	直流電流 4～20mA DC	Output	Direct current, 4 to 20mA DC

Shinko QX1 Series Modular Controllers 40

測定範囲	50～400℃，150～1000℃	Measurement range	50 to 400℃, 150 to 1000℃
視野角	22:1（RD-622-LM），75:1（RD-675-HM）	Field-of-view	22:1(RD-622-LM),

75:1(RD-675-HM)
応答特性| 1ms（ 9 0% 応答）| Response time| 1ms (90% response)

出力

| 直流電流 0～20mA DC, 4～20mA DC 直流電圧 0～5V DC, 0～10V DC

熱電対 K, J

|

Output

| Direct current, 0 to 20mA DC, 4 to 20mA DC DC voltage, 0 to 5V DC, 0 to 10V DC Thermocouple K, J

測定範囲	0～500℃	Measurement range	0 to 500℃
視野角	15:1	Field-of-view	15:1
応答特性	14ms （90% 応答）	Response time	14 ms (90% response)
出力	直流電流 4～20mA DC	Output	Direct current 4 to 20mA DC

Temperature Sensor (Thermocouple, RTD)

The temperature sensors listed below are typical Shinko sensors. We can also provide sensors suitable for the user’s specifications other than those listed. For more information, please contact our agency or us. (When ordering, please specify the diameter, length, etc.)