Rylana FA1154359 Electric Fireplace Instruction Manual

**RYLANA ** Instruction Manual
Product number FA1154359
Thank you for your purchase!

Assembly

Techniques

Care

Safety

Note

Assembly

|
---|---
|
|
|
|
| Anti-tipping hardware must be used for this product to avoid
tipping and injury. Anti-tipping hardware must be used for this product to avoid tipping and injury.

May We Help You? 800.633.5096
Please have this information ready when you call:

• Item Number
• PO ti
• Purchaser Name
• Place of Purchase
• Purchase Date
• Date Product Arrived

Immediately examine this product carefully. Any request for missing or damaged part replacement must be received within 90 days of your receipt of the product. Requests for replacement parts, if available. will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying products and we are not responsible for any damages due to product modifications. If damages or missing parts are not reported within 90 days of receiving the product, we are under no obligation to provide parts or replacement merchandise. For product issues, please contact customer service at 800-633-5096 (toll-free) Mon-Fri 8:30am – 5pm CST. Please ask for a customer service representative for issues involving damages or replacement parts. Please ask for a technical assistance representative for any issues related to product assembly/ construction. Regarding product returns. please contact the retailer from whom you purchased the product.
Please note, for items purchased in a retail store, you will need to contact the retailer (or all part needs.
Products purchased at garage sales or discount stores are sold as-is and are not covered by the above warranty

PO# Customer service

FA5223

ELECTRICAL SPECIFICATIONS

Voltage:| 120V, 60 Hz
Amps:| 12.5 Amps
Watts:| 1500 Watts
Lighting:| LED

Safety

Note

Electric Firebox Insert
User’s Operating Manual

Consumer safety

information:
Please read this manual before installing and operating this appliance.

WARNING!!!

If the information in this manual is not followed correctly, an electric shock or fire may occur, resulting in property damage, personal injury, or loss of life. Do not store or use
gasoline or other flammable vapors or liquids near this appliance.

Safety Feature:

This unit has an internal thermal overload protector. When a temperature that may cause overheating is reached, the heater will automatically shut off.
The operation can only resume when the unit is reset. (See instructions below)
To Reset Heater: Unplug the heater and wait 10 minutes for the unit to cool down. After 10 minutes, plug in the heater again and follow the operating instructions described in this manual.

Important Operating and Safety Instructions:

CAUTION:
High temperatures! Keep draperies, electrical cords, and other furnishings at least 3 feet (.9 meters) from the front and away from the front, sides, and rear of the heater.
WARNING:
Risk of fire – keep combustible material away from the front of the electrical fireplace. Servicing should be done only while the electrical fireplace is disconnected from the power supply.

When using electrical appliances, the following basic precautions should always be followed to reduce the risk of fire, electric shock, and injury.

• Read all instructions before using this heater
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury.
• Before connecting the appliance to the electric source, check that the current and power match those given on the rating plate.
• This heater is for use with a 120 Volt electrical outlet. The cord has a three-prong grounded plug, which must be used in a properly grounded three-prong outlet.
• Avoid the use of an extension cord since the extension cord may overheat and cause a risk of fire. However, if you must use an extension cord it must be a grounded No. 16 AWG minimum size and rated for no less than 1875 watts.
• Do not run the cord under the carpet. Do not cover the cord with a throw rug, runner, or similar items. The cord should be placed away from traffic areas to prevent tripping hazards.
• Never use the cord to pull the appliance.
• Never leave the appliance unattended while it is in use
• Turn controls to “off” before removing the plug from the outlet.
• Always unplug the heater when not in use.
• Do not use outdoors.
• Only use the heater on an even and stable surface to prevent the appliance from tipping over.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use it on soft surfaces, such as a bed, where openings may be blocked.
• Do not use in rooms in which highly flammable materials such as gas, paints, gasoline, solvents, etc. are stored.
• Keep a minimum distance of 3 feet between the heater and curtains and other flammable materials.
• Do not place the appliance or the plug in water or any other liquid. Should the appliance accidentally fall into the water, unplug the appliance immediately and have it checked by a qualified person before using it again.
• Do not use the appliance with wet hands, on a damp floor, or

SAVE THESE INSTRUCTIONS

**** Maintenance:

1. Cleaning your fireplace:
   You may clean the exterior of the unit with a soft, damp, lint-free cloth.
   WARNING: Before cleaning the exterior of the appliance, disconnect the unit from the power supply. The clean unit only after it is cool to the touch.

2. Cleaning the front glass:
   The front glass panel may become dirty or dusty. Dust can be removed by lightly rubbing the glass surface with a clean, lint-free cloth or paper towel. To remove fingerprints or other marks, use a soft, damp, lint-free cloth with a household glass cleaner.

Helpful Advice for Installing
Firebox into Mantel:

1. These instructions are provided in an easy-to-follow format. Simply follow the instructions to properly install the unit.
2. Please retain all packaging until you have checked that there is no damage and that your unit is working properly.
3. Small parts should be kept away from young children.
4. The area around the unit should be kept free of animal hair, lint, and other extraneous material that may be drawn into the workings of the appliance and could affect its performance.  Positioning/Locating Your Electric Fireplace:
   When choosing a location for your new fireplace, ensure that the general instructions are properly followed. For the best result, install the fireplace out of direct sunlight.

Installation Instructions:

Once the location has been prepared, the fireplace insert can be installed.

1. Make sure the unit is turned off (refer to the operating instructions).

2. Place the fireplace insert on the floor, directly behind your mantel. Make sure the backs of both the mantel and the fireplace are facing you.

3. It is advisable to have 2 people place the fireplace insert into the mantel, as it is heavy. Gently slide it into the opening in the mantel until the flange is flush against the inside of the fireplace. Make sure the insert is centered left and right in the opening. Be careful when placing and adjusting the insert, as the bottom of the insert could
   scratch the finish of the wood base/hearth of your fireplace.

4. Attach the mounting brackets (found in the fireplace mantel box) with the supplied screws using a Phillips head screwdriver. DO NOT OVER-TIGHTEN.

5. With the help of an assistant, carefully lift the completed unit and place it with the front facing out in the final location you have chosen for your fireplace.

Operating Instructions:

Control Panel on the Front of the Unit:

1. Power

2. Flame

3. Heater

4. Down Light

5. Log

6. Time

7. On/Off Main Power Button
   a. Press to switch the unit ON/OFF.
   b. Child Lock: turn the unit on and hold the POWER button for at least 5 seconds until you hear a beep sound (and the log blinks) to enter the Child Lock mode. To turn off the Child Lock mode, please press and hold the POWER button again for at least 5 seconds until you hear the beep sound (and the log blinks).

8. Adjustable Flame Brightness
   Adjust the flame brightness level: F5 – F4 – F3 – F2 – F1 – OFF (F5 being the brightest and F1 the dimmest. F5 is the default).

9. On/Off Heater Button
   a. Program the thermostat. The fireplace can be used without the heater if desired.
   b. Adjust the temperature rating from 62°F – 82°F – ON (17°C – 27°C).
   Note: °F is the default unit. To change from Fahrenheit to Celsius: Hold the heater button for approximately 5 seconds. The temperature readout will switch directly from °F to °C and vice versa.

10. Adjustable Down Light Color
    Adjust the Down Light Color: d0 – d1 – d2 – d3 – d4 (d0:OFF, d1:Red, d2:Orange, d3:Blue, d4:White).5. Adjustable Log Brightness

11. Adjust the log brightness level: L5 – L4 – L3 – L2 – L1 – OFF (L5 being the brightest and L1 the dimmest. L5 is the default).

12. Adjustable Timer
    Control the duration of the heater function. Press the timer button until you have reached the desired duration time. Levels: 30 min – 1H – 2H – 3H – 4H – 5H – 6H – 7H – 8H – 9H – OFF.

ELECTRICAL CONNECTION:
A 12.5 AMP, 120 Volts, 60 Hz circuit with a properly grounded outlet is required. It is recommended that the fireplace be on a dedicated circuit, as other appliances on the same circuit may cause the circuit breaker to trip or blow the fuse when the heater is in operation.

ELECTRICAL SPECIFICATIONS

Voltage:| 120 VAC, 60 Hz
Amps:| 12.5 Amps
Watts:| 1500 Watts
Lighting:| LED

Remote Control Operating Procedures:

1. Power: Press to turn the unit ON/OFF

2. Flame: Press to adjust the level of brightness of the flame: F5- F4- F3- F2- F1- OFF. (F5 being the brightest and F1 the dimmest)
   : raise the level of flame brightness
   : lower the level of flame brightness

3. Timer: Press to adjust the duration of the heater: 30 min- 1H- 2H- 3H- 4H- 5H- 6H- 7H- 8H- 9H- OFF

4. Down Light: Press to adjust the Down Light Color: d0 – d1 – d2 – d3 – d4 (d0:OFF, d1:Red, d2:Orange, d3:Blue, d4:White).

5. Log: Press to adjust the level of brightness of the log: L5- L4- L3- L2- L1- OFF. (L5 being the brightest and L1 the dimmest)
   : raise the level of log brightness
   : lower the level of log brightness

6. Heater: Press to turn the heater ON/OFF. Adjust the temperature rating as follows: 62°F — 82 °F (17 °C — 27 °C)
   Note: ℉ is the default unit.
   : raise the temperature rating
   : lower the temperature rating
   Note: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-Zinc), or rechargeable (nickel-cadmium) batteries.

Self Regulating Heater
The heater will turn on when the temperature is set higher than the room’s temperature and it will automatically turn off when the room has reached the desired temperature.

Troubleshooting

the main power supply switch.
The circuit breaker has tripped.| Too many appliances on this circuit. Be sure that the electrical supply for this unit is an individual circuit.
A heater is unplugged from a wall outlet.| Plug the cord into an outlet.
Power cord or power plug are damaged.| Contact SEI customer service.
Power outlet for the power plug prong is loose.| Check the power outlet and replace it with a new one.
Loose wiring.| Contact SEI customer service.
A heater power switch is off.| Turn on the heater power switch.
The heater system is overheated.| The heater may be covered, or the air inlet or air outlet is blocked. Remove the covering or the blockage and turn off the power switch and unplug it. Wait ten minutes, plug it back in, then turn the heater on again.
There is an odor coming from the heater.| he heater may emit a slight, harmless odor when first used. This is a normal condition caused by initial heating of the internal parts, and will not occur again.|
The heater is on but no flame or low flame intensity.| The flame adjusting knob is at a low setting.| Turn the knob to the maximum setting.
Loose wiring at the wall power outlet.| Contact a qualified electrician.
Flames are frozen.| Loose wiring at the wall power outlet.| Check all wiring for loose connections. Contact a qualified electrician.
The flame element is not attached to the motor.| Contact SEI customer service
Rotation motor is defective.| Contact SEI customer service
Excessive noise in the lower portion of the heater.| Flame element isn’t seated properly.| Contact SEI customer service
Motor is defective.| Contact SEI customer service
“HEATER POWER” switch has been flipped in the on position, but there is no airflow.| The heater system is overheated, and the temperature limit thermostat is cut off.| Check the air inlet and outlet. Turn off the power switch and unplug it.
Wait ten minutes, then plug it back  in and turn the heater on again.
The fan motor is defective.| Contact SEI customer service
The fan blower is balanced badly| Contact SEI customer service

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord that has an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This heater is for use on 120 volts circuit and has a grounded plug that looks like the one illustrated in Figure
1. See Figure 1 for grounding instructions. An adapter as shown at C is available for connecting three-blade grounding-type plugs to two-slot receptacles. The green grounding plug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.
**** Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – If it will not fit the outlet; have a proper outlet installed by a qualified electrician.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
  Modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  This Class B digital apparatus complies with Canadian ICES-003.

May We Help You? 800.6335096
Please have this information ready when you call:

• Item Number
• PO 0
• Purchaser Name
• Place of Purchase
• Purchase Date
• Date Product Arrived

Immediately examine this product carefully. My request for missing or damaged pad replacement must be received within 90 days of your wimple/ the product Requests for replacement pans. it available will be honored within this time frame Parts will not be available for darns riving fully assembled. We do not recommend modifying products and we are not responsible for any damages due to product rnodficabons damages or missing pads are not reported within 90 days of receiving; the product. um, are under no obligation to pawn pads or replacement merchandise. For product issues, please corer customer service at 800.633.5096 (toll-free) Mon-Fri B 30arri – 5 pm CST. Please ask for a customer sonde* representative for issues invehirg damages or replacement pans. Please ask for a technical assistance representative for any issues related to product assembly/construction/al Regarding product returns please ember the retailer from where you purchased the product Please We. for items purchased m a retail store. you will need to contact the retailer for all part needs Products purchased at garage sales or discount stores are sold arts and are not covered by the above warranty

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>