BARSKA AF12440 Digital Deluxe Professional Tripod Instructions

: June 14, 2024
: BARSKA

Table of Contents

AF12440 Digital Deluxe Professional Tripod
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AF12440 Digital Deluxe Professional Tripod

Digital Tripod | Deluxe Tripod | Professional Tripod

©2022 BARSKA® | Pomona, CA 91767 USA
www.barska.com

Tripod Safety Warnings

DO NOT set up a tripod while device is mounted
DO NOT move the tripod or adjust the legs while a device is mounted
Device weight NOT to exceed the maximum weight capacity of the tripod
NEVER leave a device unattended on the tripod
The device should be securely fastened to the quick-release mounting plate before mounting it to the tripod
Never mount a device to the tripod until all tripod legs are locked and stabilized
DO NOT stand on, rest on, or hang any from leg brace
DO NOT lift or move the tripod by the head
Keep hands clear of the inside of the legs, to avoid trapping fingers
Safety operation of the tripod is user’s responsibility

Digital Tripod

This compact lightweight tripod features an easy-to-use tilt and panning head
allowing the head to be leveled without adjusting the tripod legs. This tripod is
perfect for digital camcorders, cameras and compact binoculars in outdoor and
indoor conditions.

handle Head Parts

A – Pan and Tilt Control Handle
B – Tripod Leveling Bubble
C – Mounting Platform
D – Center Column Height Knob
E – Pan Knob

Body Parts

1 – Head
2 – Upper Leg Locks
3 – Lower Leg Locks
4 – Feet
5 – Leg Brace
6 – Center Column

Deluxe Tripod

This easy-to-use lightweight tripod features a quick-release platform so you can
easily switch from tripod to handheld. An easy-to-use tilt head allows the head to
be leveled without adjusting the tripod legs. Lastly, the accessory hook to further
stabilizes the tripod in windy conditions. This tripod is perfect for camcorders,
cameras, spotting scopes, and binoculars in outdoor and indoor conditions.

Head Parts

A – Tilt Control Handle
B – Quick Release Lever
C – Mounting Platform
D – Tripod Leveling Bubble
E – Center Column Height Knob
F – Center Column
Height Adjustment Crank
G – Head Knob
H – Head Leveling Bubble

Body Parts

1 – Head
2 – Upper Leg Locks
3 – Lower Leg Locks
4 – Feet
5 – Leg Brace
6 – Accessory Hook
7 – Center Column
8 – Carrying Handle

How To Use The Deluxe Tripod

To adjust height and angle of legs release upper and lower leg locks (2 and 3).
Extend legs to desired height and lock upper and lower leg locks.
To adjust tripod head height, loosen center column height knob (E). Flip up
center column crank (F), and slowly crank to raise or lower tripod head. Flip
crank lever to lock in place (E).
Make sure locks/knobs are locked/tight (2,3,and E), and the tripod is on a
stable surface.
To release mounting platform (C) gently pull out the quick release lever (B) to
it’s full reach. Hold mounting platform and gently pull towards you and up.
Note: Mounting maximum weight is 8.82 lbs
Attach mounting platform to the bottom of device and tighten the mounting
key under mounting platform. Pull on the quick release lever (B) to it’s full
reach. Carefully place entire assembly back into place on head by pushing
down and away from you.
With mounted item securely in place, point the objective lens at the object, look
through the eyepiece and slowly move tilt control handle (A) to desired
position. Tighten the head knob (G) to secure your viewing angle.
The tripod leveling bubble is used to level the tripod (D). The head leveling
bubble (H) levels the head allowing for optimum viewing and picture taking.
The legs and head of the tripod are both level when the bubble is centered
between the black lines.
The accessory hook (6) is used to further stabilize the tripod in very windy
conditions. Hang a counter weight (not supplied) onto the hook to stabilize
your tripod.

How To Take Care Of The Deluxe Tripod

When not in use, lower tripod legs to minimum height with upper and lower
locks (2 and 3), lower center column to minimum height (F and E) and secure
in place.
Place tripod in carrying case (included) and store your tripod in a cool dry area.

tripod Professional Tripod

This tripod is ideal for the extreme outdoors. The
rubber feet of this tripod can be exposed to reveal
spikes that can be placed in uneven ground, such as
in between rocks. Another useful feature of this tripod
is it’s variable angle leg spread. Each leg can be
angled independently from 45˚ to 175˚. Which is ideal
for leaning the tripod against an angled wall. This
tripod can support camcorders, cameras, spotting
scopes, and large binoculars.

Head Parts

A – Pan and Tilt Control Handle
B – Mounting Platform
C – Quick Release Knob
D – Head Knob
E – Variable Angle Leg Spread
F – Center Column Height Knob
G – Tilt Knob
H – Leveling Bubble
I – Tighten Knob

Body Parts

1 – Head
2 – Upper Leg Locks
3 – Lower Leg Locks
4 – Feet, with Spikes
5 – Center Column

How To Use The Professional Tripod

To adjust height of legs release upper and lower leg locks (2 and 3). Extend
legs to desired height and lock upper and lower leg locks.
If spiked feet are needed, unscrew rubber feet (4) to expose spikes.
To change angle of leg spread push down variable angle leg spread button (E)
and gently pull leg out for desired angle. Release button. Repeat this step with
other legs.
NOTE: When pushing legs back to original position. It is normal to
hear clicks from the variable angle leg button.
To adjust center column height, loosen center column height knob (F), slowly
raise column by holding head (1) to desired position and tighten in place.
Make sure locks/knobs are locked/tight (2,3,D,and F), and the tripod is on a
stable surface.
To release mounting platform (B) pull down the quick release knob (C) and
slide out of place. Under mounting platform will be a knob. Attach mounting
platform to the bottom of device and tighten into place. Carefully slide entire
assembly back into place on head. Tighten knob on the opposite side of the
leveling bubble (not pictured).
NOTE: Mounting maximum weight is 8.82 lbs.
With mounted item securely in place, point the objective lens to the object, look
through the eyepiece and slowly move pan and tilt control handle (A) to
desired position. Tighten the tilt lock knob (G) to secure your viewing angle.
The leveling bubble (H) is used to level the head of the tripod allowing for
optimum viewing and picture taking. The head of the tripod is level when the
bubble is centered between the black lines.
To release the mounting platform (B), pull down the quick release knob (C) and
slide out of place. Under mounting platform will be a screw. Loosen screw from
viewing object until both pieces are separated. Carefully slide mounting
platform back on to head.

How To Take Care Of The Professional Tripod

When not in use, lower tripod legs to minimum height with upper and lower
locks (2 and 3), lower center column to minimum height (F) and secure
in place.
Place tripod in carrying case (included) and store your tripod in a cool dry area.