Hanwha Vision SBP-156HMW Hanging Mount User Manual
- June 14, 2024
- Hanwha Vision
Table of Contents
SBP-156HMW Hanging Mount
Hanging
Mount
SBP-156HMW
Package
Product Features
This is a mount used to install the WN7 Wiper IR PTZ Camera to the Wall Mount
(SBP-300WM or SBP-300WM1/300WMW1), Ceiling Mount (SBP-300CM/300CMW), or the
Parapet Mount (SBP-300LM/300LMW).
(For compatible models, please visit our website.)
Installation Precautions
- Make sure that the place of installation can endure at least 4 times the total weight of the Hanging Mount, Wall/Ceiling/Parapet Mount.
- The Hanging Mount can also be connected to a 1.5” PF screw-threaded pipe as well as to the Wall/Ceiling/Parapet Mount.
Installation
-
Insert the Hanging Mount to 1.5″ PF screw-thread (female) pipe or to the Wall/Ceiling/Parapet Mount (SBP-300WM or 300WM1/ 300WMW1/300CM/300CMW/300LM/300LMW) and turn it counterclockwise to secure to the Pipe or Mount.
Make sure you fix the Pipe or Mount so that it reaches to the end of the 1.5” PF screw thread on the Hanging Mount. If not secured tightly, the Hanging Mount may loosen from the Pipe or Mount, causing physical damage or malfunction.
(Make sure you check the connection between two components before proceeding with the next step.) -
After aligning the installation direction guides of the hanging mount, push the main cover upward and turn it counterclockwise until it is secured.
Install the camera according to the camera’s installation guide.
-
Tightly fasten the 3 mounting screws on the top side of the Hanging Mount.
Product Specifications
| Product Name | SBP-156HMW |
|---|---|
| Supported product | XNP-9300RW / XNP-8300RW / XNP-6400RW |
- models can be added without notice
Color / Material| White / Aluminum
RAL Code| RAL9003
Product dimensions / weight| Φ95.5 x 84.0 mm ( Φ3.76 x 3.31″) / 200 g (0.44 Ib)
Product Overview
PT01-005644C
Documents / Resources
|
Hanwha Vision SBP-156HMW Hanging
Mount
[pdf] User Manual
SBP-156HMW Hanging Mount, SBP-156HMW, Hanging Mount, Mount
---|---