Hanwha Vision SBP-156WMW Wall and Pole Mount User Manual
- June 14, 2024
- Hanwha Vision
Table of Contents
**Hanwha Vision SBP-156WMW Wall and Pole Mount User Manual
**
Product Features
This is a mount used to install the WN7 Wiper IR PTZ Camera to vertical structures such as walls or round pillars of at least 60 mm. (For compatible models, please visit our website.)
Package
-
WALL&POLE MOUNT
-
HEXAGON SOCKET HEAD SCREW (HEX S6, M8 X L25)
-
DRIVER BIT (T30)
-
CABLE CLAMP
-
SCREW
-
Stainless steel mount strap (Optional accessory) SBP-100S
When installing on a wall
Install the mount plate on a wall using the hexagon socket head screw (4 pcs) included.
- When installing the product on a wall, mark and drill 4 holes into the Mount plate and insert the Hexagon socket head screws before installation.
- The side engraved with ‘TOP (POLE)’ should face the wall when installed. Install the product so that the arrow on the opposite side engraved with ‘TOP (WALL)’ points upward.
Insert the network cable through the Mount plate.
- Depending on some installation conditions, this product can be connected to 0.75″ PF which is a screw peak processed pipe. There are three directions available for inserting the pipe.
When installing on a round pillar
Select a pole to install and confirm the installation height.
Use the Stainless Steel Mounting Strap to secure the Mount Plate to the pole.
- The side engraved with ‘TOP (WALL)’ should face the round pillar when installed. Install the product so that the arrow on the opposite side engraved with ‘TOP (POLE)’ points upward.
Insert the network cable through the Mount Plate.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Wall&Pole Mount and Camera.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- The Wall&Pole Mount can be installed to a wall or round pillar of at least 60 mm.
Installation
-
Peel off the 5 tapes fixing the Wall&Pole Mount
-
Detach the top cover of the Wall&Pole Mount.
-
Detach the mount plate from the bottom cover of the Wall&Pole Mount.
-
Attach the mount plate on the bottom cover of the Wall & Mount using the driver bit included.
-
After aligning the installation direction guides of the camera and Wall&Pole Mount, push the main cover upward and turn it counterclockwise until it is secured
- Install the camera according to the camera’s installation guide.
-
Join the top cover of the Wall&Pole Mount
Product Specifications
| Product Name | SBP-156WMW |
|---|---|
| Supported product | XNP-9300RW / XNP-8300RW / XNP-6400RW models can be added |
without notice
Color / Material| White / Aluminum
PAL Code| FIAL9003
Product dimensions (WxHxD) / weight| 135 x 183 x 302 mm (5.31 x 7.20 x 11.89″)
/ 1,517 g (3.341 lb)