Rellaty Cat Water Fountain Stainless Steel Instruction Manual
- June 14, 2024
- Rellaty
Table of Contents
Rellaty Cat Water Fountain Stainless Steel
Before you start using it, you need to know…
Refill Often
Please keep the water level above 30% or full all the time. The pump will
fail if it runs dry.
Clean Regularly
Clean the pump, water tank, drinking basin and the filter every 1-2 weeks. Be
careful to remove the filter and sponge before cleaning.
Replace On Time
Replace the filter every 1-2 weeks when you cleaning your fountain.
Replace the sponge every 3-4 weeks depending on the frequency of use.
Product Overview
7-Step Installation
-
Soak the carbon filter for 5 minutes in a separate bowl before use to prevent the activated carbon dust (which will not harm your pets)
-
Install the pump holder.
-
Place the pump into holder.
-
Place the pre-filter sponge around the pump.
-
Put the soaked carbon filter in the filter case and close it.
-
Place the installed top cover back to the water tank.
(Carefully put the cover back to from a seal)
-
Insert the water faucet.
Filled with water, and then connect with power.
How to clean the pump?
You can find the water pump maintenance video in Rellaty brand store!
- Visit the Relay Store
- How to clean the pump
Pay Attention!
- Be sure to disconnect the power supply for safety when the equipment is not in use.
- Please disconnect the power supply before maintaining and cleaning the machine.
- This product is for indoor use only.
- Be sure to place the product on flat surfaces and maintain sufficient water volume during application.
- If the unit is malfunctioning or has been demerged, contact our customer service immediately for further instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>